SERFAS USM-1000 E-Lume 1000 Headlight User Manual
- June 6, 2024
- SERFAS
Table of Contents
E-LUME
USER MANUAL
Thank you for choosing a Serfas E-LUME series light! We know you will be happy with the performance and value you are getting in this product. This manual is intended to help get you started on your journey down that well-lit path. Please read this manual completely and use the recommended care precautions before using this product. If you have any further questions regarding this product please go to our website at www.serfas.com or call us at 1-623-888-5841.
SPECIFICATIONS
HIGH PERFORMANCE LED
USB RECHARGEABLE
WATER RESISTANT IPX4
EXTRUDED METAL BODY
PRECISION OPTICAL LENS
3 LEVEL BATTERY LIFE INDICATOR
CONTENTS INCLUDED
CONTENTS:
- E-LUME Headlight
- USB cable
- Handlebar bracket
- Manual
LIGHT OPERATION
-
Your new light has two different modes (solid beam and flashing). Holding down the power button for 2 seconds will switch the mode between normal and flashing.
-
Hold the power button for 2 seconds to change into the flashing mode. Hold for 1 second to turn the light off. Release button. Hold for another second to return to solid mode.
-
Press and hold the on/off button for around 1 second to turn off and on.
OVERHEAT PROTECTION
The overheat protection circuitry in your light ensures that it operates at
safe temperatures to ensure a long life. The continued heat build-up is the
biggest enemy of LEDs and causes lower lumen output and lifespan when operated
too hot. Under proper operating conditions, your LED should last 50,000+
hours. (See battery info for battery lifespan)
When your light is on many factors can cause it to get too hot (inadequate
airflow, mud, dirt, walking up that hill).
When this happens the circuitry in this device will automatically go into “Medium” mode. Once the airflow over the light has improved and the running temperature is reduced the circuitry will kick the light back into the previous model.
HOW TO MOUNT THE HEADLIGHT
UNIVERSAL BRACKET INSTRUCTIONS:
Open bracket by pulling the thumb lever down, then un-clip the thumb lever
from the cam hook to open. Adjust the rubber strap length to fit the bar by
moving the strap up or down the rungs located under the swivel light mount.
Once the length of the strap is adjusted for best fit, install around
handlebar or seat post by inserting thumb lever into cam hook, then rotate
thumb lever upwards towards swivel mount to lock. If the light still moves on
the bar open the thumb lever and shorten the strap by moving the rubber strap
up to the next rung.
HOW TO CHARGE BATTERY
WARNING: Batteries can only be charged using a USB adapter with a 5v output or USB port on a computer. Only charge batteries in a dry environment. Light has smart charging technology which ensures longer battery life and will not overcharge. Charge times depend on the light model being charged due to internal components inside the light. When the indicator turns flashing red, it means the battery is below 20%.
Power Button:
Low Battery Indicator
- 61%-100% Solid Blue
- 21%-60% Solid Orange
- 20%-0% Flashing Red
Power Button:
Charging Indicator
-
Flashing Red – Charging
-
Solid Blue – Charged
- Carefully open the rubber dust cover on the bottom side of the light, exposing the USB port.
- Insert a micro USB cord into the light USB port.
- Charge indicator will start flashing red within seconds.
Light will automatically stop charging when full charge is achieved and the
indicator light will turn solid blue. Remove the battery from the charger and
reinsert the rubber pull tab into a USB port to keep out water and dirt.
You can expect 300-500 charging cycles from this rechargeable battery.
Runtimes are affected above 110° ambient temperature or below 35° ambient
temperature. We suggest that you run in the medium or low power modes to
extend run time.
Always store the battery with a full charge. If being stored for more than a
month, recharge monthly.
LOCK MODE
- The light is set to lock mode at the factory.
- To lock or unlock the light: Press and hold the power button for about 5 seconds when the light is off.
E-LUME
USER MANUAL
WARRANTY
Go to www.serfas.com/warranty for warranty details and online registration. Limited Lifetime Warranty covers manufacture defects.
Serfas warrants to the original purchaser of this product that the product is free from defects in material and workmanship for the lifetime of the product with online registration. This warranty does not apply to damage due to heat, physical damage (crashing) resulting from abuse, neglect, improper repair, improper fit, or alterations of the fixture. This warranty is in lieu of all other agreements and warranties, general or specific, express or implied, and no representative or person is authorized to assume liability on behalf of Serfas in connection with the sale and use of this product.
Serfas reserves the right to request the return of any product submitted for
warranty consideration. All customers should contact Serfas directly for
warranty service.
Battery Warranty: Batteries are covered by a one-year warranty from the date
of purchase.
To make a claim, please e-mail
warranty@serfas.com. If e-mail is unavailable
please call Serfas at 623.888.5841.
BATTERY REPLACEMENT
At the end of your battery’s lifespan, your light allows for the end-user to replace the battery. Over time after many charge cycles, the battery will lose capacity or stop working altogether due to low voltage. When this happens a replacement battery is available for purchases from Serfas or your local retailer.
HOW TO CLEAN AND CARE FOR THE LIGHT
- Make sure to clean the dust and dirt off the light with a soft damp cloth after every ride.
- Water resistants is for rainwater only. Do not submerge the battery or the whole light into the water when cleaning.
CAUTION: Please follow the guidelines below:
Use caution when handling, the light may get hot.
Unplug the battery and headlight if not in use.
Unplug the battery and charger if not in use.
Unplug connector by the plug end, never by pulling on the cable.
Do not amend or replace any parts with Non-Serfas parts.
Do not dismantle the headlight or battery case.
Provide sufficient airflow to the headlight for cooling during use.
Do not use submerged underwater.
Do not look directly at the light.
Do not leave the light on and unattended.
Keep headlight and battery away from fire and combustible materials.
Do not store head unit when hot or straightway after use.
Unplug the USB cable when fully charged.
This light is for bicycle use only.
SERFAS, INC.
2333W. Utopoa Rd.
Phoenix, AZ 85027
serfas.com