onn 100130570 Bluetooth FM Transmitter Voice Assistant User Guide
- June 10, 2024
- Onn
Table of Contents
onn 100130570 Bluetooth FM Transmitter Voice Assistant User Guide
Contents & Information
CONTENTS & INFORMATION
Features
OVERVIEW
CONTROLS
Features
Push voice button to wake up voice assistant (Smart Device)
- Native Voice App Hands-free calling with built-in microphone Bluetooth connection to mobile device (A2DP) 8 RGB light modes
- Red / green / blue light always on
- Red / green / blue breathing light
- Turn off / all color cycles 30W charging (USB-C and USB-A) Remote Control
Overview
Operation
SETUP
-
Insert DC plug into 12V/24V DC port. Display shows vehicle battery voltage, FM station, Bluetooth indicator status.
-
Stick the remote control in a suitable place with the 3M sticker. (for example: steering wheel
-
Turn on vehicle radio. Select unused FM station (FM 88.1 to 107.9).
-
Press
ELECT SOURCE (BLUETOOTH, AUX INPUT)
PAIR DEVICE
**First-time setup:
**
- Power On
- Bluetooth indicator flashes in “Pairing Mode”
- Smartphone connected to onn. device “onn. Voice Bluetooth FM”
- Voice confirmation of successful connection
AUX INPUT
Press ” ” 2 seconds to change source
Important:
Use source device for track controls.
CONTROLS
Go back
– ” ” Skip song
– ” “Pause / Play
CONNECT NATIVE VOICE APP WITH ONN. DEVICE
Follow instructions to connect your onn. device to the Native Voice App. NOTE: Voice Assistants available over Bluetooth, not AUX.
ENABLE ONE OR MORE VOICE ASSISTANTS
Toggle on Voice Assistants including your smartphone assistant like Siri or
Google Assistant.
NOTE: No additional app downloads required.
TRY A VOICE ASSISTANT
- Press ” ” on your onn. device
- Hear a tone
- Say “Hey iHeart, play Taylor Swift”.
- Wait for response
NOTE: Status light will activate when pressed.
EXAMPLE VOICE COMMANDS
“Hey iHeart, play z100”
“Hey iHeart, play Harry Styles”
“Hey iHeart, play Country music”
“Hey TuneIn, play WDRV”
“Hey TuneIn, listen to the Yankees game”
“Hey TuneIn, turn on Bloomberg Radio”
HANDS-FREE CALLS
Status displayed Press
-” ” to answer call
” to end or reject call
-” ” 2x to redial last number
Note: May also use the Bluetooth connected device to disconnect the call.
Specifications
DC Input
12V-24V DC 5A
USB-A Output
5V/2.1A
USB-C Output
5V/3A 9V/2.22A
Bluetooth Version
V5.2
Audio Frequency
20H~20KHz
Stand-by Current
50mA(Max)
Bluetooth Working Frequency
2.402~2.480GHz
Bluetooth Effective Distance
32ft
FM Emission Effective Distance
6ft
RF Output
1.352dBm
FM Frequency
88.1MHz-107.9MHz
Legal
STATEMENT
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty
YEAR LIMITED WARRANTY COVERING DEFECTIVE PARTS
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product. This limited warranty applies only to hardware components of the Device that are not subject to accident, misuse, neglect, fire or damage from other external causes, alteration, repair, or commercial use.
Safety Precautions
CAUTION
WARNING
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>