COTTON-ON 1684364 Set The Mood Speaker Instruction Manual

Set The Mood Speaker

Instruction Manual

Product Overview

Packaging Contents
1x Set The Mood Speaker
1 x Charging Cable

Button Descriptions

ON/OFF switch: Slide the switch to the ‘ON’ position. Slide the switch to the ‘OFF’ position to turn off the speaker. <</-: Press the button once for the previous song, hold down button to decrease volume. >>/+: Press the button once for the next song, hold down the button to increase volume. >|: Press the button once to pause the music, once again to the resume play. When receiving a call, Press the button once to answer the call and hold down the button to hang up.

M: Press the button for wireless mode, once again to switch to Micro SD card mode.

Instructions To Operate Speaker

Warm white and colour lights:

• 3 brightness levels of warm white light. Change the brightness level by tapping the top mesh on the speaker.

• 6 colour light settings – Switch from white light to colour light by tapping and holding the top mesh on the speaker until it changes. The colours will flash and change to the beat of the music through wireless connection.
  Wireless audio streaming:

• Compatible with all wireless-enabled devices

• Instantly connect to your smart device within 10 meters of the speaker.
  Micro SD Card (not included)

• Listen to your favorite songs through the speaker with your Micro SD card.

Speaker Phone

• Speaker has an in-built microphone which supports hands-free capability.

Charging your Speaker:

• To charge, insert charging cable provided into the charging port of the speaker.
• Connect the USB end of the charging cable into a PC or AC/DC adaptor.
• The LED indicator will turn red on the speaker when the battery is charging.
• Once fully charged, the LED indicator will turn off.

Pairing with your device:

• Turn the speaker on using the ON/OFF switch. The warm white light will turn on. This mean that the wireless function has been activated and your speaker is now ready to pair with your device.
• Go to your devices wireless function and select MOODLEDSPEAKER from the device list.
• If password is required, type ‘COCO’.
• Your speaker is now paired and ready to use.

Once the speaker has successfully paired to your device, it will automatically connect to the same device next time your turn the speaker on, as long as the wireless function on the device is switched on.

Specifications:

• Wireless: 5.0 (2.4Ghz Frequency)
• Transfer distance: 10 metres
• Power: Light (2W) + Speaker (3W)
• Lithium Battery: 3.7 v/80OmaAh
• Material: ABS case + Metal
• Size: 9.5 cm x 12.2 em
• Charging time: approx. 3 hours
• Working time: approx. 3 hours

LED Light Colours

Warm white light (Dark, Middle, Bright), Red, Green, Blue, Orange, Purple, Indigo.

Warning & Safety Instructions

• Read manual carefully before putting the appliance into operation and keep manual for future reference.
• keep device away from heat, direct sunlight and shape
• Keep the device away from naked flames
• Do not insert any metal objects into the device — risk of short clreult
• To avoid a static charge, do not use the device In an extremely dry climate
• Do not repair unit yourself, contact an authorised specialist.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class 6 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Product Disposal

Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and batteries, please dispose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment/batteries. By disposing of batteries and electrical waste correctly, you will help to conserve natural resources and improve standards of environmental protection.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>