COTTON ON 4590296 Wireless Speaker User Manual
- June 5, 2024
- COTTON-ON
Table of Contents
NAME: WAP WIRELESS SPEAKER USER MANUAL
DATE: 24/03/2022
BRAND: RUBI
CARD STOCK: MATTE WHITE PAPER
PRODUCT OVERVIEW
Packaging contents:
1 x wireless speaker
1 x charging cable
1 x carry strap
1. Speaker
2. Charging Port
4. ON/OFF
3. Charging Indicator
5. Hole for strap
6. Indicator light
7. Microphone
INSTRUCTION FOR USE:
TO START UP:
- Hold down the OWOFF button for 3 seconds until the blue light of the Charging Indicator flashes quickly.
- Turn on your smart device and ensure your wireless function is turned on. Search for the name “Rubi Wireless Speaker” and click to connect.
- After successful pairing, the blue light will blink slowly and you can now play music from your smart device to the speaker.
FUNCTIONS:
- Play/Pause: Press the OWOFF button once to pause music and press the ON/OFF button once again to resume playing music.
- To answer calls: Press the ON/OFF button once to answer and ON/OFF again to hang up.
- Shutdown: Hold down the ON/OFF button for 3 seconds until the blue light turns off.
CHARGING THE SPEAKER
- Plug the charging cable into the charging port and the other end of the cable into a power source.
- The red indicator light is usually on when charging.
- The light will turn blue once fully charged.
- Unplug the speaker once fully charged.
WARNING &SAFETY INSTRUCTIONS:
- Read the manual carefully before use.
- Keep manual for future use of the product.
- It is recommended to unplug when not in use.
- When the charging cable is not in use, please ensure the power source is turned off and the charging cable is unplugged from the device.
- Do not expose to water or store in a damp environment
- Clean by using a soft dry cloth.
- Keep out of reach of children.
- If the product becomes damaged, do not continue to use it and seek a professional to repair it.
SPECIFICATIONS
- Dimensions: 4.5cm W, 4.5cm D & 4.8cm H 1.77in W, 1.77in D & 1.89in H
- BATTERY CAPACITY: 200mAh, 3.7V
- Transmission Distance: al° Meters
- Input Voltage: DC-5.0V /500mA
- Output Power 3W
- 40mm Inside 403W
- Frequency Response: 20Hz-20KHz
- Signal To Noise Ratio: z 75db
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Australia, New Zealand,
South Africa, Singapore,
HK, Malaysia, USA