eppfun LS002 Cute Meet 150 Earbuds User Manual

Product Name: cute meet 150 Model: LS002
FCC ID: 2AY3ILS002

BT Version: V5.0
Frequency Band: 20Hz – 20KHz
Output Power: 10mW(Odb,lKHz)
Working Temperature: 0 – 45°C
Total Playtime: about 32 hours
Charge Time: 1 – 2hours
Input Standard: TYPE-C USB 5V/1A
Transmission distance: 10 meters Charge Case size: 555529 mm
Earbuds size: 231720 mm

Charging

1.1. Please tear off the insulation films when you first use the earbuds.

Fully charge before use

The device can be powered through a TYPE-C USB Cable or wireless device charging.

Pairing

Ensure both buds are inside the charging case and take out both buds, waiting for server seconds, the buds will flash White.

Select Cute meet 150 under the Bluetooth menu on your device. The pairing of true wireless stereo mode is successful.

For mono channel pairing, take out anyone earphone, the white light will flash and automatically connect to the recorded device. When there is no connection, you need to manually click the pairing record on the device.

Fitting

Insert the Cute meet 150 into your ear and rotate to fit comfortably.

To optimize the best fit and audio experience, it is recommended to try different earbud sizes.

Basic Operation

Additional Operation|
---|---
Factory reset| Disconnect connection the headset and mobile phone, take out from the charging case respectively,five-tap power key continuously, the LED will quickly flash after the earbuds power off then completed the reset
Reject a call| Press MFB 2 seconds to reject a call
Receive incoming and on hold ongoing call| Single press MFB
Hang up the phone| Double press MFB
Voice command(Siri/Google/Alexa)| Three-tap to activate voice assistant (R)
Volume +| Long press R earbud to increase the volume
Volume –| Long press L earbud to reduce the volume
Wireless charging| Put the charge box to the wireless device to start wireless charge
LED indicator (Earbud )|
Pairing| White flash
Charging| Red on
Full Charged| Red off
Battery low| Red slow flash
LED indicator (Charge case )|
Wireless charging (charge case )&TYPE-C in| White on
Full charged| White off

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
As the sample is too small, the product name, trademark, model, MC ID and LOGO are printed on the outer package and user manual.

EPPFUN One(1)Year Limited Warranty

EPPFUN belonged to Shenzhen CHANG SHENG Technologies Co., Ltd., extending You this Limited Warranty. Statutory or common law may provide You with additional rights or remedies, which shall not be affected by this Limited Warranty. Consumers have the right to choose whether to claim service under the EPPFUN One-Year Limited Warranty or under their consumer law rights. Important: The EPPFUN One-Year Limited Warranty terms and conditions shall not apply to consumer law claims. For further information about consumer laws, please contact your local consumer organization. Product support: Access www.meppfun.com to get EPPFUN support and new info. If you have any questions, can send an email to service@meppfun.com to get relevant support. Remedies Your EPPFUN branded hardware product (“Product”) is warranted against defects in materials and workmanship for a period of one (1) Year from the date of original retail purchase (“Warranty Period”)when used in accordance with EPPFUN’ s instructions in the provided user manuals. Under this warranty, you will be able to direct your claims to EPPFUN even in situations when you purchased the Product from a third party.lf a defect arises during the Warranty Period, EPPFUN at its option will(l)repair the Product at no charge with new parts or parts that are equivalent to new in terms of performance and reliability;(2)exchange the Product with a product of equivalent functionality built with new and/or previously used parts that are equivalent to new in terms of performance and reliability or, with your consent, a product that is at least functionally equivalent to the product it replaces; or(3)refund the original purchase price. This warranty excludes normal depletion of consumable parts, such as batteries, unless failure has occurred due to a defect in materials or workmanship and damage resulting from abuse, accident, modifications, unauthorized repairs, or other causes that are not defects in materials and workmanship.

How to Get Warranty Service

A Warranty Service Order must be requested from EPPFUN within the stated Warranty Period determined from the date of receipt of shipment. To request a Warranty Service Order, contact EPPFUN support team:service@meppfun.com.To obtain warranty service, in accordance with applicable law, EPPFUN may require the customer to provide proof of purchase details and/or comply with registration requirements before applying for Warranty Service. When contacting EPPFUN via telephone, call charges may apply depending on your location. Please contact your network operator for details.

Warranty options
EPPFUN will provide warranty service through one or more of the following options: (1)Carry-in service. You may return your Product to an EPPFUN Retail or EPPFUN Authorized Service Provider location that offers carry-in service.(2 )Mail-in service.lf EPPFUN determines that your Product is eligible for mail- in service, you may ship your Product to an EPPFUN Repair Service or Authorized Service Provider location.(3)Do-it-yourself(DIY)parts service.DIY parts service allows you to service your own Product.lf DIY parts service is available at the circumstances, the following process will apply: (i)When EPPFUN requires the return of the replaced Product or parts, EPPFUN may require a credit card authorization as security for the retail price of the replacement Product

or parts and applicable shipping costs. If you are unable to provide credit card authorization, DIY parts service may not be available to you, and EPPFUN will offer an alternative service.EPPFUN will ship a replacement Product or parts to you with installation instructions, and, if applicable, any clear requirements for the return of the replaced Product or parts.lf you follow the instructions, EPPFUN will cancel the credit card authorization, so you will not be charged for the Product or parts.lf you fail to return the replaced Product or parts as instructed or return a replaced Product or parts that are ineligible for service, EPPFUN will charge your credit card for the authorized amount. (ii)When EPPFUN does not require the return of the replaced Product or parts.EPPFUN will ship free-of-charge replacement Products or parts accompanied with instructions and, if applicable, any clear requirements for the disposal of the replaced Product or parts. (iii)EPPFUN is not responsible for any labor costs you incur relating to DIY parts service. EPPFUN reserves the right to modify the warranty service. Should you require further assistance, contact EPPFUN via service@meppfun.com.

To Apply for a Refund, the Following Conditions Must be Met
There are a few important things to keep in mind when returning a product you purchased from EPPFUN:(1)A Return Merchandise Authorization(RMA)must be requested from EPPLA within 10 calendar days from the date of receipt of shipment. To request an RMA, contact the EPPFUN support team via service@meppfun.com.lf the applicable law at your country provides a longer period of revocation, the law shall prevail;(2)Only items that have been purchased directly from the EPPFUN online Store can be returned to EPPFUN. Products purchased through other retailers must be returned in accordance with their respective refund and return policy;(3)Returned product and packaging must be in good physical condition(i.e., not physically broken or damaged);(4)Please ensure that the item you’re returning is repackaged with all the cords, adapters and documentation that were included when it was shipped;(5)The shipping cost must be paid by the customer;(6)Necessary contact information (including but not limited to name, phone number, address, email, purchase date, etc.) must be clearly displayed on the printing template provided by the EPPFUN support team and must be included along with the returned product;(7)For warranty service, please keep your receipt and/or invoice as proof of purchase.

Limited Product Warranty (1) EPPFUN is not responsible for damage arising from failure to follow instructions to use the product. (2) For Latin American Consumers, customer service from the EPPFUN service center or EPPFUN Retail is not available. To request a Warranty Service Order, contact local EPPFUN authorized dealers.(3)This warranty excludes normal depletion of consumable parts, such as batteries, unless failure has occurred due to a defect in materials or workmanship. (4)Any limitations of liability in this warranty document shall not apply to (i) death or personal injury pursuant to any mandatory law on product liability; (ii)fraud or fraudulent misrepresentation; (iii) intentional misconduct or gross negligence; (iv) a culpable breach of major contractual obligations. A damage claim based on a breach of major contractual obligations or gross negligence will be limited to foreseeable damage typical for the sales contract concerned.

Additional Terms and Conditions
(1)Shipping and handling charges, gift-wrapping fees, and taxes paid (e.g., state, customs, VAT) are not refundable.lf your order contains multiple products and you only return a portion of them, please note that total shipping charges are not refundable. Partial shipping charges are also not refundable. (2) If you return a product to EPPFUN, (i) without an RMA from EPPFUN; (ii) without all parts included in the original package, EPPFUN retains the right to refuse delivery of such return.lf any term is held to be illegal or unenforceable,it shall be severed from this warranty and the legality or enforceability of the remaining terms shall not be affected. This warranty is governed by and construed under the laws of the country in which the product purchase took place.

Important Safety Information

Handle the EPPFUN headphones with care. They contain sensitive electronic components and batteries, which can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat or liquid. Don’t use damaged EPPFUN headphones. Please follow the instructions:

• Do not use this product near water.
• Clean only with dry cloth.
• Only use accessories specified by the manufacturer.
• Refer servicing to qualified personnel.

CAUTION: Prevention of Hearing Loss Permanent hearing loss may occur if headphones are used at high volume for prolonged periods of time.
To avoid damage to hearing, make sure that the volume is turned down before playing music on your headphones. If your ears start ringing or aching, remove the headphones immediately and have your hearing checked. To protect your hearing:

• Always listen at a low to moderate volume.
• Remember to rest your ears once in a while.
• Limit the amount of time you use the headphones at a high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Reduce the volume if you can’t hear people speaking near you.

Traffic
The EPPFUN headphones effectively isolate external noise. Avoid using the EPPFUN headphones while driving a vehicle, crossing streets, or any activity that requires your full attention and capability to hear. Listening to music in traffic environments may lead to accidents.

Cleaning
Headphones can lead to ear infections if not properly cleaned. Use a soft lint-free cloth to clean headphones from time to time. Don’t get moisture in any openings, or use aerosol sprays, solvents, or abrasives. if a skin problem develops, discontinue use. if the problem persists, consult a physician.

Batteries
Don’t attempt to replace the batteries of EPPFUN headphones yourself. You may damage the batteries, which could cause overheating and injury.

Choking Hazard
The EPPFUN headphones may present a choking hazard or cause another injury to children. Keep them away from children.

Magnetic Fields
The EPPFUN headphones contain components and radios that emit electromagnetic fields. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and the EPPFUN headphones. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using the EPPFUN headphones if you suspect they are interfering with your pacemaker, defibrillator, or any other medical device.

Electrostatic Shock
When using the EPPFUN headphones in areas where the air is very dry, it is easy to build up static electricity, which causes the possibility for your ears to receive a small electrostatic discharge from the EPPFUN headphones. To minimize the risk of electrostatic discharge, avoid using the headphones in extremely dry environments, or touch a grounded unpainted metal object before wearing the headphones.

Regulatory Compliance Information

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:l. This device may not cause harmful interference;2. This device must accept any interference received, including interference that may cause undesired operation.

Important:
Changes or modifications not expressly approved by Shenzhen CHANG SHENG Technologies Co., Ltd. responsible for compliance could void the user s authority to operate the equipment.

Radio and Television Interference:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. ff this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

Eu Compliance Statement
Eppfun declares that this wireless device is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive. This device can be used in the European Community.

The aim of EU’s Waste Electrical and Electronic Equipment (WEEE) directives 2002/96/EC and the RoHS directive is to reduce waste from electric and electronic products and to recycle as much of the materials as possible. Any remaining waste should be virtually risk-free to handle and the risk of hazardous emissions should be minimal.

This product contains a built-in rechargeable lithium battery. Battery safety warning: prohibit dismantling, impact, extrusion, or into the fire; If there is serious swelling, do not continue to use; Do not place in the high- temperature environment; Battery is banned after immersion.

The Bluetooth. and the Bluetoothelogo have registered trademarks of BluetoothtSIG, Inc. and are used under license. The App Store logo is a trademark of Apple Inc. Google Play is the trademark of Google Inc.

This product contains a built-in rechargeable lithium battery. Battery safety warning: Prohibit dismantling, impact, extrusion, or into the fire; If there is serious swelling, do not continue to use; Do not place in the high- temperature environment; Battery is banned after immersion.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen ChangSheng technology ca, ltd
4#405 Xinggang Tongchuanghui, No.6099, Baoan Avenue, Bao ‘a District, Shenzhen, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>