eppfun Cute Meet 300 Bluetooth In-Ear Headphones User Manual

eppfun Cute Meet 300 User Manual

Model: Cute meet 300
Product ID: LS003
BT Version: V5.2
Frequency Band: 20Hz~20KHz
Output Power: 10mW(0db,1KHz)
Working Temperature: 0~45°C
Total Playtime: about 32hours
Charge Time: 1~2hours
Input Standard: TYPE-C,USB 5V/1A
Transmission Distance: 10meters
Product Size:
Charge Case: 85.434.519.2mm
Earbuds: 32.617.316mm

Product Overview

What’s in the Box

How to Pair

1. Take out the Earbuds from charging case. Remove the insulation films and put the earbuds back into charging case, close the charging case and wait 5 seconds.
   

2. Open the charging box and the headset will automatically enter TWS pairing. After waiting for a few seconds, one headset enters the white light flash state, and the other headset’s white light flashes once every 5S.

3. Select Cute meet 300 under bluetooth menu on your device. The pairing of true wireless stereo mode is successful.

For mono channel pairing, please follow the below steps.

4. Take out any one earphone, the white light will flash and automatically connect to the recorded device. When there is no connection, you need to manually click the pairing record on the device
5. Congratulations. Your earbuds are connected successfully. You can choose to use them at True Wireless Stereo Mode or Single Channel Mode.
6. Connect to a New Device
   When you want to connect to a new device, please turn off the Bluetooth connection between your headphones and the current device. When the indicator lights flashing white, it indicates they have entered the pairing mode. Then you could select and connect to “Cute meet 300” on the  Bluetooth connection interface of your new device.
   

Touch Control

Power on

• Take out earbuds from charging case

Manual Power On

• Long press the touch button 2 seconds.

Power off

• Put earbuds into charging case
• No connection within 3 minutes

Manual Power Off

• Long press the touch button 5 seconds

If you are in a call and another call comes in

• Press the left/right earbud for 1.5 seconds to reject the new call;
• Three – tap to the left/right earbud to finish the current call and answer the new call;
• Three tap the left/right earbud to keep the current call and connect the incoming call;
• In three party calls, two phone calls can be switched by three tapping the left/right earbud.

Charging

Charge before the first use. Open the charging case and insert the left earbuds into the left charging compartment and the right earbud into the right charging compartment.

Charging the Charging Case

Factory Data Reset

Try to reset as following instructions when two earbuds are unable to connect:

A. Disconnect Bluetooth connection between the headset and mobile phone

B. Five-tap power key, The LED will quickly flash; System restart,

C. The operation is complete, wait for them pairing successfully

D. Go to bluetooth mode on your device and select Cute meet 300 to connect.

Tech Support & FAQ

If you have any question, please contact us at service@meppfun.com

FAQ

1. How to change from Mono Mode to wireless Stereo Mode
   (a)When you just only use the right earbud, take out the left earbud from charging case, the music from right earbud will stop, the left earbud will connect your device, and then the left and right earbud will play music at the same time.
   (b)When you just only use the left earbud, take out the right earbud from charging case, the music will come out from the left and right earbuds at the same time.

2. The earbuds cannot reconnect to my device automatically.
   If your earbuds are connected to several devices before, they will reconnect automatically with the recently connected device.
   (a) If the left white light flashes quickly, please enter the phones Bluetooth menu, search for Cute meet 300 and connect it
   (b) If the left white light flashes slowly, please check if the earbuds are connected to another device automatically. And then, disconnect this connection or restore the factory settings (Factory data reset).

3. The left and right earbuds can’t pair with each other.
   Please put your earbuds into the charging case, and then take out them again. They will automatically pair with each other. If it doesn’t work, please restore the factory settings (Factory data reset)

4. No sound from left/right earbud.
   Please put your earbuds into the charging case, and then take out them again. If still not solve this problem, please carry out restoring the factory settings (Factory data reset), and then put your earbuds into charging case and then take out them again.

5. Can’t turn on my earbuds Please put them into charging case and charge the case at the same time

FCC Compliance Statement FCC and IC Statement

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B)

FCC/IC Radiation Exposure Statement

This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Important Safety Information

Handle this earbuds with care. They contain sensitive electronic components and batteries, which can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat or liquid. Do not use damaged earbuds. Please follow the instructions·
Do not use this product near water.
Clean only with dry cloth.
Only use accessories specified by the manufacturer.
Refer servicing to qualified personnel.
CAUTION: Prevention of Hearing Loss
Permanent hearing loss may occur if earbuds are used at high volume for prolonged periods of time.

To avoid damage to hearing, make sure that the volume is turned down before playing music on your earbuds. If your ears start ringing or aching, remove the earbuds Immediately and have your hearing checked. To protect your hearing: Limit the amount of time you use the earbuds at high volume.

Avoid turning up the volume to block out noisy surroundings.

Reduce the volume if you cannot hear people speaking near you

Traffic The earbuds effectively isolate external noise. Avoid using the earbuds while driving a vehicle, crossing streets, or any activity that requires your full attention and capability to hear. Listening to music in traffic environments may lead to accidents.

Cleaning Earbuds can lead to ear infections if not properly cleaned. Use a soft lint-free cloth to clean earbuds from time to time. Do not get moisture in any openings, or use aerosol sprays, solvents, or abrasives. If a skin problem develops, discontinue use. If the problem persists, consult a physician.

Batteries Do not attempt to replace the batteries of earbuds yourself. You may damage the batteries, which could cause overheating and injury.

Choking Hazard The earbuds may present a choking hazard or cause other injury to children. Keep them away from children.

Magnetic Fields The earbuds contain components and radios that email electromagnetic fields. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical and the earbuds. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using the earbuds if you suspect they are interfering with your pacemaker, defibrillator, or any other medical device.

Electrostatic Shock When using the earbuds in areas where the air is very dry, it is easy to build up static electricity, which causes possibility for your ears to receive a small electrostatic avoid using the earbuds in extremely dry environments or touch a grounded unpainted metal object before wearing the earbuds.

EU Compliance Statement

Fund declares that this wireless device is in compliance with the essential requirements and other relevant provisions of R&TTE Directive. The device can be used in the European Community

The aim of EU’s Waste Electrical and Electronic Equipment(WEEE) directives 2002/96/EC and the Ro HS directive is to reduce waste from electric and electronic products and to recycle as much of the materials as possible. Any remaining waste should be virtually risk-free to handle and the risk of hazardous emissions should be minimal.

Model Name: Cute meet 300
FCC ID: 2AY3ILS003 Made in China

This product contains a built-in rechargeable lithium battery. Battery safety warning. Prohibit dismantling, impact, extrusion or into fire; If there is serious swelling, do not continue to use; Do not place in high temperature environment; Battery is banned after immersion.

Important Safety Information

Handle the EPPFUN headphones with care.They contain sensitive electronic components and batteries, which can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat or liquid.Don’t use damaged EPPFUN headphones.Please follow the instructions:

• Do not use this product near water.
• Clean only with dry cloth.
• Only use accessories specified by the manufacturer.
• Refer servicing to qualified personnel.

CAUTION: Prevention of Hearing Loss
Permanent hearing loss may occur if headphones are used at high volume for prolonged periods of time.

To avoid damage to hearing, make sure that the volume is turned down before playing music on your headphones. If your ears start ringing or aching, remove the headphones immediately and have your hearing checked.To protect your hearing:

• Alaways listen at a low to moderate volume
• Remember to rest your ears once in a while.
• Limit the amount of time you use the headphones at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Reduce the volume if you can’t hear people speaking near you.

Traffic
The EPPFUN headphones effectively isolate external noise.Avoid using the EPPFUN headphones while driving a vehicle, crossing streets, or any activity that requires your full attention and capability to hear.Listening to music in traffic environments may lead to accidents.

Cleaning
Headphones can lead to ear infections if not properly cleaned.Use a soft lint- free cloth to clean headphones from time to time.Don’t get moisture in any openings, or use aerosol sprays, solvents, or abrasives.If a skin problem develops, discontinue use. If the problem persists, consult a physician.

Batteries
Don’t attempt to replace the batteries of EPPFUN headphones yourself. You may damage the batteries, which could cause overheating and injury.

Choking Hazard
The EPPFUN headphones may present a choking hazard or cause other injury to children. Keep them away from children.

Magnetic Fields
The EPPFUN headphones contain components and radios that emit electromagnetic fields.These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices.Maintain a safe distance of separation between your medical device and the EPPFUN headphones. Consult your physician and medical device manufacturer for information specific to your medical device.Stop using the EPPFUN headphones if you suspect they are interfering with your pacemaker, defibrillator, or any other medical device.

Electrostatic Shock
When using the EPPFUN headphones in areas where the air is very dry, it is easy to build up static electricity, which causes possibility for your ears to receive a small electrostatic discharge from the EPPFUN headphones.To minimize the risk of electrostatic discharge, avoid using the headphones in extremely dry environments, or touch a grounded unpainted metal object before wearing the headphones.

Regulatory Compliance Information

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: 1.This device may not cause harmful  interference; 2. This device must accept any interference received, including interference that may cause undesired operation.

Important:
Changes or modifications not expressly approved by Shenzhen CHANGSHENG Technologies Co., Ltd responsible for compliance could void the user’s authority to operate the equipment.

Radio and Television Interference:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must adept any interference received, including interference that may cause undesired operation

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Eu Compliance Statement
Eppfun declares that this wireless device is in compliance with the essential requirements and other relevant provisions of R&TTE Directive.This device can be used in the European Community.

The aim of EU’s Waste Electrical and Electronic Equipment (WEEE) directives 2002/96 /EC and the RoHS directive is to reduce waste from electric and electronic products and to recycle as much of the materials as possible.Any remaining waste should be virtually risk-free to hand e and the risk of hazardous emissions should be minimal.

This product contains a builtin rechargeable lithium battery.Battery safety warning: prohibit dismantling, impact, extrusion or into the fire;If there is serious swelling, do not continue to use;Do not place in high temperature environment;Battery is banned after immersion.

The Bluetooth® and the Bluetooth® logo are registered trademarks of Bluetooth® SIG, Inc.and is used under license.

The App Store logo is trademark of Apple Inc. Google Play is the trademark of Google Inc.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

4#405 Xinggang Tongchuanghui, No. 6099, Baoan Avenue, Qiaotau Community, Fuhai Street, Baoan District, Shenzhen.CHINA
518103©2020 Shenzhen Changsheng Technology Co. LTD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>