Airplove APM1010L Smart Air Purifier User Manual

: June 6, 2024
: Airplove

Model: AP-M1010L
User Manual

READ AND SAVE THESE INSTRUCTIONS

Safety Instructions

General Safety

Only use Air Puriﬁer as described in this manual.
Do not use without removing the plastic wrap from the ﬁlter. If not removed, the air puriﬁer will not ﬁlter air, and may overheat, causing a ﬁre hazard.
Do not use the air puriﬁer outdoors.
Keep the air puriﬁer away from water or wet, damp areas. Never place in water or liquid.
Do not use in excessively humid areas.
Keep the air puriﬁer away from heat sources such as stovetops, ovens, or radiators.
Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
Keep 5 feet / 1.5m away from where oxygen is being administered.
Supervise children when they are near the air puriﬁer.
Do not place anything into the openings of the air puriﬁer.
Do not place heavy objects on the air puriﬁer.
Keep the inside of the air puriﬁer dry. To prevent moisture build-up, avoid placing in rooms
with major temperature changes or underneath air conditioners.
Always unplug the air puriﬁer before servicing (such as when changing the ﬁlter).
Do not use the air puriﬁer if it is damaged or not working correctly, or if the power cord or plug is damaged. Do not repair yourself. Contact Customer Support
WARNING: To reduce the risk of ﬁre or electric shock, do not use this air puriﬁer in combination with any 3rd party controls (such as a dimmer switch).
Not for commercial use. Household use only.

Power Cord & Plug

Located the air puriﬁer near the electrical outlet it is plugged into.
Never place the power cord near any heat source.
Do not cover the power cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
Keep the power cord out of areas where people frequently walk. Place the cord where it will not be tripped over.
This air puriﬁer has a polarized plug (one prong is wider than the other), which ﬁts into a polarized outlet in only one orientation. This is a safety feature to reduce the risk of electric shock. If the plug does not ﬁt, reverse the plug to the correct orientation. If it still does not ﬁt, do not bypass this safety feature and try forcing the plug into the outlet. Instead, do not use it with the outlet.
This air puriﬁer uses standard US 120V, 60Hz outlets. If using outside the US, check for compatibility.

Package Includes

Item	Quantity
Air Puriﬁer	1
3-Stage Filter (Pre-Installed)	1
User Manual	1
Quick Start Guide	1

Speciﬁcations

Power Supply	AC 120V, 60Hz
Rated Power	36W
Eﬀective Range	258 ft² / 24 m²

Note Eﬀective for larger rooms, but puriﬁcation will
take longer. Ideal Room Size is based on 5 complete
air changes per hour (ACH).
CADR| 120 CFM / 204m³/h
Noise Level| 24–48dB
Air Puriﬁer Dimensions| 8.3 x 8.3 x 13.6 in /21 x 21 x 34.5 cm
Air Puriﬁer Weight| 6.6 lb / 3 kg
Operating Conditions| Temperature: 14°F to104°F / -10°C to 40°C Humidity: < 85% RH

Getting To Know Your Air Puriﬁer

a. Fan Speed Indicator
b. Fan Speed Button
c. On/Oﬀ Button
d. Sleep Mode Button
e. Timer Button
f. Timer Indicator
g. Wi-Fi Indicator
h. Night Light Button
i. Lock Button| j. Filter Change Indicator & Button
k. Air Outlet
l. Housing
m. Air Inlet
n. Power Cord
o. Filter Cover
p. True HEPA Filter
q. Screw Nut
---|---

Getting Started

Flip the air puriﬁer over. Twist the screw nut counterclockwise and remove the bottom ﬁlter cover.
Remove the ﬁlter from its plastic packaging and place the ﬁlter back into the air puriﬁer.
Reattach the ﬁlter cover and twist the clockwise screw nut to lock.
Place the air puriﬁer on a ﬂat, stable surface with the display facing up. Allow at least 15 inches / 38cm of clearance on all sides of the air puriﬁer. Keep away from anything that would block airﬂow, such as curtains.

Using Your Air Puriﬁer

Using Govee Home App allows access to additional functions and features, along with the ability to control the air puriﬁer remotely.

Functions & Controls

Power On & Oﬀ

Plugin the power cord, and all lights will ﬂash once. The air puriﬁer will then enter standby status automatically.
Tap On/Oﬀ Button to turn the air puriﬁer On/Oﬀ. The fan will start on a level I once turned On.
Note: Ensure the outlet’s voltage is compatible with Air Puriﬁer or else it may cause damage.

Change Fan Speed

Tap Fan Speed Button to change fan speeds between I, II, and III.
Note:

The fan speed indicators are not buttons and cannot be used to change the fan speed.
The fan speed indicators will light up when active.
Fan speed III is the loudest but cleans the air quickest.
For best results, or to address a speciﬁc air quality issue such as smoke, run the air puriﬁer at high speed (fan speed III) for 15–20 minutes before using a lower speed.
To eﬀectively clean air, keep windows and doors closed while the air puriﬁer is on.

Timer

Tap the Timer Button repeatedly to select a time.
To cancel a timer, tap the Timer Button until all-timer indicators are oﬀ.

Note:

The fan speed indicators are not buttons and cannot be used to change the fan speed.
The fan speed indicators will light up when active.
Fan speed III is the loudest but cleans the air quickest.
For best results, or to address a speciﬁc air quality issue such as smoke, run the air puriﬁer at high speed (fan speed III) for 15–20 minutes before using a lower speed.
To eﬀectively clean air, keep windows and doors closed while the air puriﬁer is on.

Sleep Mode

Tap Sleep Mode Button once to turn Sleep Mode on.
Tap Sleep Mode Button again to exit Sleep Mode.

Note:

Sleep Mode dims all icons to very low brightness and operates quietly by using a fan speed lower than fan speed I.
Tapping Fan Speed Button will exit Sleep Mode.
You can still adjust the night light and timer while the air puriﬁer is in Sleep Mode.

Night Light

Tap once to turn on the night light.
Tap again to turn oﬀ the night light.

Note:

You can turn the night light on and oﬀ using the Night Light button, even when the air puriﬁer is turned oﬀ (as long as it is still plugged into power).
You can also adjust night light brightness using Govee Home App. The puriﬁer unit will remember this set brightness.

Lock
Press and hold the Lock Button for 3 seconds to lock/unlock the display.
Note:

Locking the display prevents settings from being accidentally changed. When locked, the display will not respond to being tapped.
While the display is locked, Lock Button will light up. If other buttons are tapped, Lock Button will ﬂash 3 times.
The air puriﬁer can still be controlled using Govee Home App when the display is locked.
To operate the display’s buttons, you must unlock the display.

Memory Function
Even while turned oﬀ or unplugged, the air puriﬁer will remember its previous fan speed, sleep mode, and night light brightness settings.
Note:
The memory function does not work with the timer, lock display feature, or night light settings (except for the light brightness setting).
Filter Change Indicator & Button
When the lifetime of the ﬁlter is reached, the ﬁlter exchange indicator light will be lit up with red. After replacing with the new ﬁlter, press and hold the button for 3s. When the indicator light ﬂashes 3 times, means the reset is completed.
Note:

After the ﬁlter reset, the ﬁlter usage time will be recalculated.
You can also reset the ﬁlter change indicator by 3s long-press, even the indicator light is not on.

LED Indicators

Working Status	Indicator Status
Power On	Power Indicator lights up white
Fan Speeds I, II, and III	Indicators separately light up blue
Timers 2h, 4h, and 8h	Indicators separately light up blue
Filter Change Needed	Filter Change Indicator lights up red
Locked	Lock Indicator lights up white
Sleep Mode On	Sleep Mode Indicator lights up white
Night Light On	Night Light Indicator lights up white
Display Oﬀ	All indicator lights will dim
Ready for Wi-Fi Connection	Wi-Fi Indicator light slowly ﬂashes blue
Wi-Fi Connecting	Wi-Fi Indicator light quickly ﬂashes blue
Wi-Fi Connected	Wi-Fi Indicator light shows solid blue

Pairing Your Air Puriﬁer With Govee Home App

Due to ongoing updates and improvements, the Govee Home app’s interface and features may be slightly diﬀerent than those shown in the manual. In case of diﬀerences, follow the in-app instructions.
Pairing Steps

To download the Govee Home App, scan the QR code or search “GOVEE” in the Apple App Store® (iOS devices) or Google Play Store (Android devices).
Turn on your smartphone’s Bluetooth.
Open the Gove Home App, tap the “+” icon in the top right corner, and search “H7121”.
Tap the device icon and follow the on-screen instructions to complete the pairing.

Note:

You can use the Gove Home App to connect your smart puriﬁer to Amazon Alexa or Google Assistant. Follow the in-app instructions to connect Govee Home App to your voice assistant. You can use the Gove Home App to connect your puriﬁer to Amazon Alexa or Google
The Gove Home App is continually updated and App features will expand.

About The Filters

The air puriﬁer uses a 3-stage ﬁltration system to purify air.

Pre-Filter

Captures large particles such as dust, lint, ﬁbers, hair, and pet fur.
Maximizes the ﬁlter’s life by protecting it from large debris.

H13 True HEPA Filter

Captures at least 99.97% of airborne particles 0.3 microns (µm) in size.
Filters small particles such as ﬁne dust, smoke particles, and allergens such as pollen and pet dander.

Activated Carbon Filter

Physically adsorbs smoke, odors, and fumes.
Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulﬁde and volatile organic compounds (VOCs).

Clean Air Delivery Rate

This air puriﬁer has a Clean Air Delivery Rate (CADR) of 120 cubic feet per minute (CFM), or 204m³/h.
CADR measures the eﬃciency of an air puriﬁer by indicating the volume of clean air it puriﬁes per minute. This is based on the removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air puriﬁer will remove and the larger the area it can clean. The rating is measured at the air puriﬁer’s highest speed.

Air Change Per Hour

The Air Change Rate is how many times all of the air in a room can be puriﬁed (or “changed”) by the air puriﬁer in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft / 2.4 m ceilings.
For smaller rooms, the air change per hour will increase. This air puriﬁer has an air change per hour of 5, which means it can change air 5 times per hour at the max speed in a single, closed room up to 183 ft² / 17m². The air puriﬁer is eﬀective for larger rooms, but air puriﬁcation will take longer, with fewer air changes per hour.

Note: To eﬀectively clean air, keep windows and doors closed while the air puriﬁer is on.

Humidity
Moisture may damage the ﬁlters. This air puriﬁer should be used in an area with a humidity level below 85% RH. If the air puriﬁer is used in excessively humid areas, the surface of the ﬁlter may become moldy.
Essential Oils

Do not add essential oils to the air puriﬁer or ﬁlter. The ﬁlter can be damaged by the oil and will eventually release an unpleasant smell.
Do not use diﬀusers near the air puriﬁer.

Care & Maintenance

Cleaning Air Puriﬁer
Do not clean the air puriﬁer with abrasive chemicals or ﬂammable cleaning agents.

Cleaning Steps

Unplug before cleaning.
Wipe the outside of the air puriﬁer with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
3. Vacuum the inside of the air puriﬁer.

Cleaning The Filter
Do not clean the ﬁlter with water or other liquids.
The outer pre-ﬁlter should be cleaned every 2–4 weeks to increase eﬃciency and extend the life of the ﬁlter. Clean the pre-ﬁlter using a soft brush or vacuum hose to remove hair, dust, and large particles.

Filter	When to Clean	How to Clean	When to Replace
Pre-Filter	Every 2–4 weeks	Use a soft brush or	6 – 8 months
H13 True HEPA Filter	Do not clean	Do not clean	6 – 8 months
Activated Carbon Filter	Do not clean	Do not clean	6 – 8 months

Replacing the Filter
The ﬁlter should be replaced every 6–8 months. You may need to replace your ﬁlter sooner or later depending on how often you use your air puriﬁer.

Replacing Steps

Unplug the air puriﬁer. Flip the air puriﬁer over and remove the bottom ﬁlter cover.
Remove the old ﬁlter.
3. Clean out any remaining dust or hair inside the air puriﬁer using a vacuum hose. Do not use water or liquids to clean the air puriﬁer.
Unwrap the new ﬁlter and place it into the housing
Reattach the ﬁlter cover and twist the clockwise screw nut to lock. Plugin the air puriﬁer.
Reset the Filter Change Indicator.

Note:

To maintain the performance of your air puriﬁer, only use oﬃcial Govee ﬁlters. To buy replacement ﬁlters, visit Govee’s online store.
Remember to reset the Filter Change Indicator after changing the ﬁlter.

Filter Replacement Time Period
Using your air puriﬁer in an environment with relatively high pollution may mean you will need to replace the ﬁlter more often, even if the Filter Change Indicator is oﬀ.
You may need to replace your ﬁlter if you notice any of the following:

Increased noise when the air puriﬁer is on
Decreased airﬂow
Unusual odors
A visibly clogged ﬁlter

Resetting The Filter Change Indicator

When the Filter Change Indicator light red, it prompts to reset the ﬁlter service life.

Filter Change Indicator

Press and hold the Filter Change Button for 3 seconds. The filter Change Indicator will ﬂash 3 times and then turn oﬀ once successfully reset.
The filter Change Indicator will light up as a reminder to replace the ﬁlter. Depending on how often you use the air puriﬁer, the indicator should turn on within 6–8 months. You may not need to replace your ﬁlter immediately, but you should check the ﬁlter when Filter Change The indicator turns on.
If the ﬁlter was recently changed before the Filter Change Indicator light up, reset the countdown again by pressing and holding Filter Change Indicator for 3 seconds.

Storage
If not using the air puriﬁer for an extended period of time, wrap both the air puriﬁer and the ﬁlter in plastic packaging and store in a dry place to avoid moisture damage.

Troubleshooting

The troubleshooting section below is for solving frequently asked questions for the puriﬁer unit. If your problem persists, please contact customer support.

For Air Puriﬁer

Problem	Possible Solution

Air puriﬁer will not turn on or respond
to touch controls.| Plugin the air puriﬁer.
Check to see if the power cord is damaged. If so, stop using thepuriﬁer and contact Customer Support.
Plug the air puriﬁer into a diﬀerent electrical outlet.
The air puriﬁer may be malfunctioning. Contact Customer Support.
Make sure the ﬁlter’s plastic packaging is removed and is the ﬁlter is properly installed.
Airﬂow is signiﬁcantly reduced.| Tap Fan Speed Button to change the fan speed.
Make sure there are at least 15 inches / 38cm of clearance on all sides of the air puriﬁer.
The pre-ﬁlter may be clogged by large particles, such as hair or lint, blocking air ﬂow. Clean the pre-ﬁlter.
Replace with a new ﬁlter.
Air puriﬁer makes an unusual noise
while the fan is on.| Make sure the ﬁlter is properly installed with its plastic packaging removed.
Make sure the air puriﬁer is operating on a hard, ﬂat, level surface.
Replace the ﬁlter.
The air puriﬁer may be damaged, or a foreign object may be inside.
Stop using the air puriﬁer and contact Customer Support.
Do not try to repair the air puriﬁer yourself.
Clean the ﬁlter or replace it with a new ﬁlter if necessary.
A strange smell is coming from the puriﬁer.| Make sure not to use your air puriﬁer in an area with high humidity or while diﬀusing essential oils.
Poor air puriﬁcation quality.| Tap Fan Speed Button to increase the fan speed.
Make sure no objects are blocking the sides or top of the air puriﬁer (the inlet or outlet).
Make sure the ﬁlter is removed from its packaging and is properly installed.
Close doors and windows while using the air puriﬁer.
If the room is larger than 258 ft² / 24 m², air puriﬁcation will take longer. The air puriﬁer may not be as eﬀective in signiﬁcantly larger rooms.
Replace with a new ﬁlter.
Filter Change
The indicator is still on after replacing with a new ﬁlter.| Reset the Filter Change Indicator.
Filter Change
The indicator has not turned on within 8
months.| Filter Change Indicator is a reminder for you to check the ﬁlter and will light up based on how often the air puriﬁer has been used. If you don’t use your air puriﬁer often, Filter Change Indicator will not turn on as soon.
Filter Change
Indicator turned on
within 6 months.| Filter Change Indicator is a reminder for you to check the ﬁlter and will light up based on how often the air puriﬁer has been used. If you run your air puriﬁer frequently, Filter Change Indicator will turn on sooner.

For App & Connectivity

Cannot connect to the Govee Home App.

Make sure the Bluetooth of your smartphone is enabled and your smartphone is not connected with other Bluetooth air puriﬁers.
Enable the smartphone’s Location Services.
Try connecting with another smartphone.
Make sure your App is the latest version.
Make sure you are connected to the 2.4GHz network and conﬁrm the network is working correctly.
Make sure the Wi-Fi password you entered is correct.
Shorten the distance between the air puriﬁer, the Wi-Fi router, and the smartphone.
Make sure your air puriﬁer and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.