LaView LV-PWR3 Security Camera User Manual
- June 6, 2024
- LaView
Table of Contents
LaView LV-PWR3 Security Camera User Manual
PRODUCT WARRANTY CARD
Your LaView product is protected by a 1-year warranty from the purchase date. For more information on repairs, exchange, and other policies, please visit
Please send all inquiries through the Contact Form on our website, or email us at info@laviewusa.com. And our technicians would be glad to assist you.
PARAMETER
CUSTOMER SERVICE
WHAT’S IN THE BOX
PLEASE CONSULT THIS CHECK LIST FOR ALL PARTS.
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the ursees authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to. which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
RF warning statemen t:
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follovving measures:
- Reorient or relocate the receiving antenna.
- Increase the separation bevveen the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to. which the receiver is connected.
- Consult the dealer or an experienced radio,’IV technician help
RF warning statement :
To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body
APP SET UP
For step-by-step Mobile APP set up instruction, please read the Quick Start Guide included in the package or check out our Youtube tutorials.
DOWNLOAD AND INSTALL APP
LaVlew App is available for both iOS and Android OS. Search the name ‘LaView’, in App Store or Google Play. ( The other LaView apps, such as LaView Connect, LaView ONE, LaView Life do NOT support R3 camera )
Please download the LaVlew App from the App Store or Scan the QR Code below
• NIGHT VISION
The camera is equipped with infrared LED technology to capture black and white night vision image in detail at night. However, the night vision image quality may be affected by the following factor.
There are high contrast light sources such as car headlight pointing to the camera.
- MAKE SURE YOUR PHONE IS CONNECTED TO A 2.4GHZ WIFI NETWORK
- COMPLETE THE APP REGISTRATION PROCESS
- FOLLOW THE IN-APP INSTRUCTION TO PAIR THE CAMERA
Click on the ‘+’ sign to add the camera. Continue to click “Video Surveillance” » “Smart Camera”
Connect the camera to power via included power adapter and USB cable. (If you are not setting up the camera for the very first time, press the reset button instead for 5 seconds until you hear a beep.)
Wait until the LED indicator is flashing red rapidly, which means the camera is ready for pairing.
Enter the WiFi Password to generate a QR code that carries your WiFi information
WHAT CAN I DO IF I RECEIVE TOO MANY NOTIFICATIONS?
If the camera is placed at location with heavy traffic, we recommend to relocate it to a place with less traffic to receive less alerts.
OTHER
WHAT CAN I DO IF THE IMAGE IS NOT CLEAR?
- The camera is equipped with 1080p Full HD lens and sensor to produce superior image, however the image quality may be affected by the lighting condition
- Ensure the camera is NOT facing to environment with poor lighting condition or with extreme high contrast. Ensure it is NOT facing directly to bright lighting sources such as sun light.
- Ensure your phone and your router has enough bandwidth to stream HD video. A minimum of 2MBps is required to stream each 1080p camera. If the netvvork does not meet this requirement, the live view stream will be downgraded to SD automatically
Use the camera to scan the QR code on the phone ( keep the camera 6-8 inches away from the phone)
- Press ‘l Heard a Prompt’ after the camera receives the OR code and beeps. The camera will start pairing
- When connecting, you should make sure your router, mobile phone, and camera are as close as possible
- Wait until the camera is connected online
- Customize the camera name to differentiate cameras in different locations and finish and paring process
- If the pairing is not successful, press the Reset button for 5 seconds until you hear a beep and start again. Or check the FAQ section for more troubleshooting steps
- Check if WIFI password or router is changed. If so please reset the camera
- Ensure router in powered on and online
- Ensure camera has power
- Ensure the phone has decent network bandwidth
- Check the app is on latest version
MOTION DETECTION
HOW TO TURN ON AND OFF MOTION DETECTION?
To turn on or off motion detection setting, go to the camera menu and click on Detection Alarm Settings
WHAT CAN I DO IF I CANNOT RECEIVE NOTIFICATIONS?
- Ensure your phone notification setting is enabled for LaView APP
- Ensure the phone has decent network bandwidth
- Ensure the camera is online
INSTALLATION
FIND A GOOD MOUNTING SPOT
Use the WiFi Signal Indicator in the APP live view screen to Signal: 98% test the WiFi signal strength. Move the camera as close to the router as possible if the WiFi signal is poor
TROUBLESHOOTING
IF YOU CANNOT CONNECT THE CAMERA TO THE INTERNET, CHECK THE FOLLOWING S TEPS
- Ensure you are connecting to a 2.4GHz WIFI not 5GHz
- Ensure WiFi password or SSID is correct
- Ensure the camera is placed as close to the router as possbile
- Ensure camera is powered on and the indicator is blinking rapidly before scanning the OR code
- Ensure you are using the correct APP ( LaView )
- Ensure the camera is scanning the QR code on the phone in the correct way
- If the above steps doesnt help, reset the camera and start pairing again
WHAT CAN I DO IF THE CAMERA STOPPED WORKING?
- Close the APP and Restart the APP again
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>