AIHOOR A1 TWS Bluetooth Headset User Manual

AIHOOR A1
USER MANUAL

Thank you for purchasing the AIHOOR A1 True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number.

Package Contents

• True Wireless Earbuds
• Charging Case
• Four Pairs of Ear-Tips (XS/S/M/L)
• USB-A to C Cable
• Quick Start Guide °User Manual

Product Diagram

Specifications

Earbuds

Charging Case

• Fully charge the charging case before first use. Connect the charging case to a USB charger or charging port with the included USB-A to C cable. Only one green light is on when the battery is 0-25% remaining, two green lights are on when the battery is 26%-50% remaining, three green lights are on when the battery is 51%-75% remaining, when all 4 LED charging indicator lights are green, the case is fully charged. Charging takes around 2 hours, and after being fully charged, the case can fully charge the earbuds for 4 times.
• The earbuds should be stored in the case when not in use.

AUTOMATIC CONNECTION
Pairing:

1. Turn on the Bluetooth of your mobile phone.
2. Open the charging case, they will automatically turn on and enter the pairing mode.
3. Turn on the pairing function on the device to be paired with the earbuds.
4. From the list of available devices, Find and select “AIHOOR A1” from the list of available devices.
5. If a code or PIN code is required for pairing, please enter ” 0000″.

Notes

• When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found.
• To clear the pairing list, take either the earbuds out of the charging case and then tap the touch-sensitive panel 7 times, After that, put the earbud back in and take it out again to enter pairing mode.
• In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired.
• If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again.
• The maximum wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last paired device. To connect with other devices, repeat the previous pairing steps.

Controls & LED Indicators
Streaming Audio
Once paired, you can wirelessly stream audio from your device to the earbuds. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.

earbud
Skip to the previous track| Double-tap the touch-sensitive panel on the left earbud

Active Noise Canceling
Active noise canceling functionality requires the use of both earbuds.

Turn on / off| Touch and hold the touch-sensitive panel on the left or right earbud for 2 seconds to turn on/off the noise canceling function
---|---

Taking Calls

Answer or end a call| Tap the touch-sensitive panel on either earbud to answer a call, and touch and hold for 2 seconds to end the call.
---|---
Reject an incoming call| Touch and hold either earbud for 2 seconds
Use Siri or other voice assistants| While your device is connected, triple-tap either earbud
LED Indicator (Earbuds)| Status
---|---
Flashing green and red| Pairing mode
Flashing red| Low battery

FAQ

The earbuds are on, but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.
I’ve connected the earbuds with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the
audio can be transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile.
The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range- related issues.
What’s the wireless range of the earbuds?
The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.
The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in ‘Warranty & Customer Support.’
I put the earbuds back in the charging case, but the earbuds are still connected
The charging case is probably out of power. Try charging it.
Product Care & Use

• Keep away from liquids and extreme heat.
• Don’t use the earbuds at high volume for extended periods, as this may cause.

Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.
Amazon US orders : info@aihoor.net
Amazon EU orders : info@aihoor.net
Amazon CA orders : info@aihoor.net
Amazon JP orders : info@aihoor.net
*Please note, AIHOOR can only provide after-sales service for products purchased directly from AIHOOR. If you have purchased from a different seller, please contact
them directly for service or warranty issues.
FCC Information for Users
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
CE Statement
Max RF power level:
BT classic (2402–2480MHz): 2.281dBm
RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC
Council Recommendation (1999/519/EC).
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Hereby, Shenzhen Ausounds Intelligent Co., Ltd.A1. declares that the radio equipment type (True Wireless Earbuds, A1) is in compliance with Directive
2014/53/EU.
Notice: This device may be used in each member state of the EU.

WARRANTY CARD
NAME:……………
EMAIL:…………………….
DATE OF ORIGINAL PURCHASE:………………….
DEALER………………….
PHONE NUMBER……………………….
MODEL……………………………………..
DESCRIPTION OF PROBLEM……………………..

Model: A1
AUSOUNDS Intelligence, LLC.
www.aihoor.net 
info@aihoor.net
Designed by AUSOUNDS In California USA
FCC ID: 2AZLD-ARA1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>