AIHOOR A4BT True Wireless Stereo Earbuds User Manual

June 4, 2024
AIHOOR

AIHOOR A4BT True Wireless Stereo Earbuds User Manual
AIHOOR A4BT True Wireless Stereo Earbuds

CONTENTS

CONTENTS

SET BEFORE USE

SET BEFORE USE

CHARGING

CHARGING

POWER ON/OFF

ON

OFF
POWER ON/OFF

PAIRING

PAIRING

CONTROLS

CONTROLS
CONTROLS

RE-PAIRING

RE-PAIRING
RE-PAIRING

RESET

RESET

CLEAN

CLEAN

Regular cleaning is recommended to prevent issues with charging.

Thank you for purchasing the AIHOOR A4BT True Wireless Stereo earbuds.
Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

SPECIFICATIONS

Product Number AIHOOR A4BT Rated output power 5 mW@1%THD
Bluetooth Version 5.0 Frequency Range 20Hz-20KHz
Bluetooth Protocol A2DP/AVRCP/HSP/HFP Microphone Sensitivity -38dB@1KHz
Charging Time z2H Battery Capacity 40mAx 2 (earbuds) 400mA (charging case)
Product Weight 40g Waterproof level IPX4
Endurance time 25h (using Bluetooth) Bluetooth Effective Distance 10m
Earphones Impedance 320 Charging Voltage 5 V=0.5 A

SAFETY INSTRUCTIONS

  1. Do not place the earbuds in extremely high or low ambient temperatures for an extended period of time. Extreme temperatures will cause the device to deform.
  2. Use electronic equipment with caution during thunderstorms.
  3. This product contains small parts which could cause harm if swallowed. Keep out of the reach of children.
  4. Using the earbuds for a long time at high volume may affect your hearing. Make sure to use an appropriate level of volume.

BATTERY WARNING

This product contains a lithium battery. Please do not disassemble, strike, crush, or place the product into contact with flames. Do not expose to high temperatures or direct sunlight for a prolonged period. If there is any swelling, leakage, odor, or any other abnormality in the battery compartment of the product, cease use immediately. Please dispose of used batteries properly and in accordance with local regulations.

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RF EXPOSURE STATEMENT:

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISEDC STATEMENT

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

ISEDC RF EXPOSURE STATEMENT:

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

THIS DEVICE COMPLIES

After reviewing this material for compliance or RF field strength limits, users may be exposed to radio frequencies and compliance and compliance to acquire. the corresponding information.

This product complies with the radio interference requirements of the European Community.

DECLARATION OF CONFORMITY

AUSOUNDS Technology Co., Ltd. hereby declares that this product AIHOOR A4BT is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU. The Declaration of Conformity for the AutreBits MetaBuds is available from https://aihoor.net

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Follow us @AiHOOR.official
Icons

Model: A4BT
www.aihoor.net | info@aihoor.net
Designed by AUSOUNDS GROUP
FCC ID: 2AZLD-A4BT
Icons

For FAQs, detailed user manual and more information, please visit https://aihoor.net/pages/help
QR code

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals