BYTECH HM-AU-BE-218 True Wireless Stereo Earphones Instruction Manual

BYTECH HM-AU-BE-218 True Wireless Earbuds Instruction Manual

Thank you for purchasing your new true wireless earbuds.

We recommend that you spend some time reading this instruction manual in order to fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Safety Rules

1. Charge the earbuds and the charging case at least once every 6 months.
2. Do not store the product in extreme temperature (below 0℃ or above 45℃）
3. Do not use chemicals or detergents to clean the product.
4. Do not drop or knock the product on hard surfaces.
5. Do not scrape the surface of product with sharp objects.
6. Do not try to take the product apart.

In the Box

Wireless Earbuds
Portable Charging Case
Type-C Charging Cable
User manual
Ear-Tips x 4 (S/M/L)

Product Overview

1. Indicator/Microphone
2. Touch Area
3. Silicone Ear-tips
4. Earphones Charging Contacts
5. Charging Case Indicator
6. USB-C Charging Port

Find Your Fit

Choose the size of silicone ear-tips that you feel the most comfortable with.

Specification

400mAh for charging case
Charging time| Around 1.2 hour
Playing time| Around 5 hours Up to 20 hours with
charging case
Talk time| 3-5 hours
Earbuds weight| 5g each
Case weight| 10g

Power ON/OFF

Power ON

1. Take the earbuds out of the charging case the earbuds will power on automatically.
2. Long press the left and right touch area of the earbuds for three seconds, the earbuds indicator light flashes red and blue, and the earbuds powered on.

Power OFF

1. Put the earbuds into the charging case, the earbuds will power off automatically.
2. Long press the left and right touch area of the earbuds for eight seconds, the earbuds indicator light turn off, and the earbuds powered off.

Pairing

1. When using PT-30 True Wireless Earbuds the first time. Take the earbuds out of the charging case, the earbuds indicator lights flash red and blue the “pairing mode” is on.
2. Turn on Bluetooth on your mobile device.
3. Search and select “PT-30”.
4. When successfully connected, the blue LEDs flash every 5 seconds.

Remark: Earbuds power off when they stay out of range for over two minutes.

Charging

1. Fully charge both the earbuds and the charging case before the first use.
2. To prevent damage, use the provided USB-C cable.
3. Fully dry o the earbuds and the USB port before charging.
4. Charging takes around 1.2 hours. Bluetooth range
5. When fully charged, all LEDs will stay on.

Multi Functions

Factory Reset

1. Ensure L&R disconnect to any device. (turn off the bluetooth device connected before)
2. Triple tap the touch area of the left and right earbud.
3. When hear the prompt tone, The earbuds is ready to pair with your device now.

WARNING

1. Listening to earbuds at high volume levels, particularly over extended periods of time, may damage your hearing.
2. Supervise children when using equipment. This product is not a toy.
3. The small parts included with this product can be a choking hazard. This product is not intended for use by small children and should be kept away from children under 3 years of age.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does ause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>