BYTECH BCAUBO170RD Bluetooth Headphones Instruction Manual
- June 4, 2024
- Bytech
Table of Contents
BYTECH BCAUBO170RD Bluetooth Headphones
Specification
- Special Feature Lightweight
- Form Factor Over Ear
- Connectivity Technology Bluetooth
- Model Name BCAUBO170RD
- Cable Feature Without Cable
- Color Red
- Product Dimensions 1 x 1 x 1 inches
- Item Weight 5 ounces
What’s In the Box
- Deejay LED Headphones
How to Pair
- Put the headphones next to the device you want to connect it to.
- Make sure that the device is on.
- Press and hold the power button on your headphones for about 7 seconds.
- This will put it in pairing mode which will allow it to pair up with your device.
Care and Maintenance
- Wipe after every usage. …
- Do not allow anyone else to use your headphones.
- Brush any earwax or dirt off the driver unit gently.
- Don’t forget to bring the jack.
- Don’t put them in your pocket right away.
- Avoid dangling the wires.
- Keep your wiring neat and organized.
- Avoid wrapping your cables tightly in loops.
Can Bluetooth earphones be fixed?
Repairs for headphones are offered by several audio and electronics stores. If you are unable to find a local repair shop, you might consider sending your headphones to the maker or another repair facility for a fix. Your headphones can also be covered by a warranty, depending on the issue.
Features
- Bluetooth headphones
- Wireless
- Over Ear
- Item Package Weight: 1.0 pounds
- 4 GHz
- Wireless headphones generally operate near 2.4 GHz (radio frequency), which offers a great wireless range of up to 91 m (300 ft). The modulating signal, as its name suggests, is used to modulate the carrier signal
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Warranty & Support
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
Frequently Asked Questions
How do I pair my bytech Bluetooth headphones?
When you remove the earphones from the charging case, the “pairing mode” indicator lights on the earbuds will blink red and blue. your mobile device’s Bluetooth should be enabled.
How do I use my Bluetooth headphones?
Toggle the listed headphones. Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.
Why is only one headphone working on my Bluetooth headphones?
The sound cannot be played if the Bluetooth headphones are covered with dust, wax, or lint, which results in a situation where one side functions and the other does not. So, the first thing you need to do is check that your Bluetooth headphones are clean.
How do I reset my Bluetooth headphones?
Remove the headphones’ charging cable from the device. For 10 seconds, press and hold the power button. When the LED light starts to blink, your headphones have been successfully reset.
Why is my Bluetooth headphones not turning on?
If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things. Important: Consult the product’s instructions if you require model-specific details to accomplish any of the tasks.
How do you charge Bluetooth headphones?
Turn off your headphones. Put the USB cable’s small end into the USB-C port on the right earcup. Connect the other end to a USB wall charger or an active computer. The battery indicator blinks white when it is charging.
Why my Bluetooth headset is turning off automatically?
There are several Bluetooth devices that lack an idle mode. In order to save energy, the phone disables useless features like Bluetooth. Therefore, when the battery starts to run low, it will turn itself off automatically. By default, the phone timeouts after 10 minutes and turns off Bluetooth.
Why is my Bluetooth headphones not charging?
Check your headphones’ charging port for any damage, such as bent metal or connectors. Additionally, check to see if the port feels tight when you touch it, as this can indicate that the connectors have come loose from the headset.
How do I stop my Bluetooth headphones from blinking?
A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses.
How do you fix wireless headphones without sound?
Verify your volume settings. Choose a playback device as your default. Bluetooth Support Service should be enabled. Bluetooth and audio drivers should be updated. Activate Windows Troubleshooter. Check Device Manager for audio issues.
How do I turn my Bluetooth headphones on without the power button?
Between the volume control buttons, there is a circular button. Once pressed to pause audio, twice pressed to toggle on or off. Hold the button down after turning it on to pair Bluetooth. There was a problem, I apologize.
Where is the power button on Bluetooth headphones?
You are referring to the middle of the number “3.” All of the functions are on the same side, which is fantastic. When connecting to your phone, the centre button also serves as the “answer and hang up” button.
Can I charge Bluetooth headphones with mobile charger?
The mobile charger can be used to charge Bluetooth headphones. The USB cables will meet your charging needs and are constructed in accordance with the USB standard.
Why is only one side of my wireless headphones working?
When using Bluetooth (wireless), if only one speaker side is functional, it means that one of the little mechanical triggers in the jack port is stuck in the middle, instructing your headphone speakers to use the audio aux connection rather than the Bluetooth technology.
How do I reset my wireless Bluetooth headphones?
If the Bluetooth headset is designed with a power key and two volume controls, you can restart the Bluetooth headset by pressing and holding the [Power switch] key and the [Volume +] key simultaneously for 15 seconds. This will cause the Bluetooth headset to turn off automatically and restore its factory settings.