Dongguan Xing Yue Electronic XY-OT038 Wireless Charging Stand Instructions
- June 6, 2024
- Dongguan Xing Yue Electronic
Table of Contents
FCCID:2ALCFXY-OT038
Features:
- Mobile Phone Stand Board
- LED Indicator
- Integrated Cable with Type C tip
- Wireless Charging Surface
- Magnetic Surface (remove the film before use)
What’s included:
1 x Wireless Charging Stand
1 x integrated Type-C charging cable
1 x Instruction Manual
Tech Specifications
- Type-C Input: DC 5V/2A; 9V/1.5A
- Wireless Output: 5W/7.5W/10W
Instructions:
1. Wireless Charging Mobile phones and other electronic devices:
-
Connect the Type-C tip(3) of the charging pad to a power source. The LED indicator will glow BLUE&RED for 4 seconds then turn RED to indicate the wireless charger is in standby mode and ready to begin charging.
-
Place the wireless charging supported mobile device on the wireless charging surface(4), the LED will glow BLUE when the device is charging.
-
The phone will begin to charge automatically.
-
Once fully charged remove the device.
Note: When wireless charging, if the Led indicator flashes BLUE the device is either NOT a wireless charging device or there is an object between the device and charging surface interfering with the charging process.
2. Wireless Charging with Magnetic Surface:** -
If your wireless charging compatible device contains magnets, it will attach to the magnetic surface(5) of the stand for better alignment to secure wireless charging.
-
This item is also compatible with other items, the magnetic function just won’t work.
3. Phone Holder Function: -
If your device contains magnets, it will attach to the surface to hold your device vertically or horizontally.
-
If your device does not contain magnets, you will need to pull out the stand board(1) to hold it.
SAFETY PRECAUTIONS:
- WARNING-When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury
- Do not use the device if damaged or modified.
- Do not disassemble the device. For repairs, seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause an explosion.
- Ensure that qualified service professionals use only identical replacement parts to ensure product safety.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device, attachments can interfere with wireless charging and lead to overheating.
- The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, videotapes, mechanical watches, hearing aids, loudspeakers and
VCRs.Pace-makers may be damaged or switch to “Test Mode” in the presence of a strong magnetic force, if a pace-maker or another electrical body implant is in use, keep
a minimum of 3 feet distance.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device a distance of 15
cm surrounding the
device and 20 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>