Dongguan Xing Yue Electronic XO-9561 Light Up Bluetooth Speaker Instruction Manual

: June 12, 2024
: Dongguan Xing Yue Electronic

Table of Contents

Functions:
Product Dimension
What’s included:
Tech Specification
Instructions:
SAFETY PRECAUTIONS:
FCC Statement:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**Dongguan Xing Yue Electronic XO-9561 Light Up Bluetooth Speaker

**

Functions:

ON/OFF Switch
LED panel
Micro USB Port
Mic

Product Dimension

What’s included:

1 x Bluetooth® Speaker (SM-2575)
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual

Tech Specification

Playing time: up to 1.5 hr at max volume
Charging time: up to 2 hr
Pairing Name: “Light Up”

Instructions:

(Be sure to fully charge the speaker before using first time)

Charging the Speaker
- Connect the provided charging cable to a power source and to the micro USB port on the speaker (3). The LED indicator light will glow red when charging and turn off when fully charged.
Bluetooth® Setup:
- Turn ON/OFF switch to the ON position, Speaker will tone and LED panel will turn WHITE.
- LED panel will begin to flash WHITE when in pairing mode.
- Turn on the Bluetooth function on mobile device, Select “Light Up” pairing name. LED will glow WHITE if successfully paired
- Speaker will automatically pair if the mobile device has been paired before.

SAFETY PRECAUTIONS:

WARNING- When using this product, basic precautions should always be followed:

Read all the instructions before use.
Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not expose the device to moisture.
Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause explosion.
Ensure that qualified service professionals use only identical replacement parts to ensure product safety

FCC Statement:

Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2ALCF-XO9561
Name of the Distributor: Bulletline Inc
Address of the Distributor: 6301 East 10th Avenue, Suite 110 Hialeah, FL 33013 USA
MADE IN CHINA