Langshixing Electronic DX20X WiFi Camera User Manual
- June 6, 2024
- Langshixing Electronic
Table of Contents
WIFI camera
User Manual
Note: The camera picture in the user manual for reference only , please take the physical object as the standard.
Packing list
Product structure
Content- Description
The red light is normally on: The camera is on or the internet has problem
The red light flickers: wait for the user to connet to wifi(the red light
flickers slowly) connect to wifi (The red light flickers quickly)
The blue light flickers: Connecting to wifi
The blue light is normally on: The camera is working normally
Product structure
Content- Description
RESET : Press” Reset” for about 3-5s to restore the factory default.
TF card slot: Support TF card local storage (Maximum support 128G), please
format the TF card in the”CloudEdge” APP for the first time using
Charging Indicator: The red light is normally on, the camera is charging The
Blue light is normally on, the camera is fully charged
Download the App
Scan the below QR code or search the “CloudEdge” in the APP store or google play, then download and install the APP.
|
---|---
iOS APP Download| 
Android APP Download
---|---
User Sign Up, Log in
- Sign Up: Select your country to register an account with your email.
- Log in: Select your country, enter the existing account and password to log in.
Add the Camera
Make sure the wifi for phone connection is 2.4G and in the good network
condition (5GHz not supported ), wait for the device red indicator flickers
slowly (if the device red indicator doesn’t flickers slowly, long press the ”
reset ” for 3-5s until the device send out “BUGU ” sound, wait for the device
to restart then add the camera).
Open the “CloudEdge” APP, click the “+” icon in the upper right corner to add
the camera, select “Battery Camera”, then enter to the camera list screen.
Follow the app prompt click “Next”, enter wi-fi password which mobile phone
connected, then click “Next” then put the QR code face to the camera about 10
to 15 cm, waiting for the camera emits “BUGU ” sound, then click “Next”, then
the APP will search the device automatically.
Function introduction
| 1. Time of the device | 8. Full screen preview |
|---|---|
| 2. Sound of the device | 9. Definition of the picture |
| 3. Live | 10. History |
| 4. Screenshot | 11. Cloud |
| 5. PTZ | 12. Record |
| 6. Motion Detection | 13. Intercom |
| 7. Settings | 14. Album |
FAQ
-
Q: Failed to add during network configuration?
A: Please make sure your phone is connected to a router in the 2.4GHz band, and make sure that the Wi-Fi password is correct. -
Q: After scan adding is still unsuccessful?
A: Restart the device or power off the device after scan adding is still unsuccessful, and then try to add it again. -
Q: The device cannot preview normally?
A: Please check if the network signal is too weak, please put the camera close to the router, if still cannot preview, reset the camera and add it again. -
Q: After resetting the device, why is the camera still in the device list?
A: Resetting the device only to reset the camera’s network configuration, but cannot change the configuration on the APP, to delete the camera, you must log in the APP to delete. -
Q: How to switch the camera network to another router?
A: First remove and reset the device on the APP, and then configure the network for the device again through the APR -
Q: Why does the device can not recognize the TF card?
A: Please insert and remove the TF card after power off, please check if the TF card is working normally and whether it is in FAT32 format, when the mobile phone or the device is working in unstable network, the APP also will prompt that the TF card cannot be recognized.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>