KAON AR1344P Wi-Fi Extender Installation Guide

AR1344P

Quick Installation Guide

1. AR1344P overview

1. LED (Power, WAN, LAN, 2.4G, 5G, WPS)
2. LAN2
3. LAN1/WAN
4. WPS Button
5. Factory Reset Button (press 5~6 seconds)
6. Power Connector
7. Power On/Off Switch

LED Scenario

The light on the front side of your AR1344P gives you information about the AR1344P’s operation.

LAN1/WAN port
LAN| Green| The LAN2 port is sending or receiving data| A power -on device is connected to the LAN2 port| No device is connected to this LAN2 port
2G| Green| The route is sending or receiving Wi-Fi traffic| The 2.4GHz radio is operating| The 2.4GHz radio is off
5G| Green| The route is sending or receiving Wi-Fi traffic| The 5GHz radio is operating| The 5GHz radio is off
WPS| Blue| Smart connecting or mesh grouping| Master mode O
Mesh O
Network Service O| Mesh X
Network Service X
Green| Smart connecting or mesh grouping| Slave mode O
Mesh O
Network Service O| Mesh X
Network Service X

AR1344P Wi-Fi Extender

A   AR1344P lave
B   Lagacy GW
C AR1344P Master

2. Quick Mesh Setup : Option #1→ WPS

To set up AR1344P Master and Slaves:

Step 1. Connect your legacy GW to the LAN1/WAN port on your AR1344P using the included Ethernet cable.
Step 2. Connect your AR1344P(Master) to a power source.
Note: If the Power LED on the front of AR1344P does not light, press the Power On/Off switch.
Step 3. Wait for the AR1344P master’s Power LED to light solid green and the 2.4G and 5G LED lights solid green.
Step 4. Place the AR1344P slave about 3 meters from the AR1344P master. Connect the AR1344P slave to a power source.
Step 5. Wait for the AR1344P slave’s power LED to light solid green and the 2.4G and 5G LED lights solid green.
Step 6. Press the WPS button on AR1344P master for 3 seconds.(Do not press the WPS button on AR1344P Slaves)
Step 7. Wait for about 3-4 minutes until mesh pairing is complete and the AR1344P slave’s WPS LED turns solid green.
Step 8. Place your mesh extender(s) in the desired location(s) in the household and ensure that the Signal LED stays solid green.

Note: You’ll get the best signal when it is in an open space like on a shelf or a table.

3. Quick Mesh Setup: Option #2 → Mobile App

Step 1. Download the Kaon Wi-Fi App

Scan the unique QR code below, or go to Google Play or the Apple App Store to download the Kaon WiFi app. Install the app on a compatible iPhone or Android smartphone.

Follow the step-by-step instructions on the App to connect your home gateway to the AR1344P unit.

Step 2. Launch the Wi-Fi app. Select Set up manually
Step 3. Go to Wi-Fi settings to connect to your network (AR1344P Wi- Fi Network)
Step 4. Tap Find my device , enter your login information printed on a label on the bottom of the AR1344P and tap Login. You can see the dash board of the app after you successfully set up your Wi-Fi network.
Step 5. Add AR1344P to an existing Wi-Fi network, tap icon on the top right hand corner of the dashboard.
Tap to add new AR1344P and scan QR code printed on a label on the bottom of the AR1344P, then tap Create Mesh.
Step 6. Customize the network name and password.
Tap icon on the top right hand corner of the dashboard, and select the Wi-Fi settings to create your own network name (SSID) and password.

Note: If your device disconnects from the Wi-Fi network, view the available Wi-Fi network and then choose the new network name (SSID) and enter the new password.

4. Accessing your AR1344P from WebUI

Step 1. Access the web-based setup page

a.   Connect your PC to the working AR1344P (master mode)’s wireless network (SSID).
b.   WebUI address, ID and the password are located at the label at the bottom of your device.
c.   Launch a web browser (Internet Explorer or Chrome).
d.   Enter http://192.168.1.1 or http://kaonmesh_ ( is the last 4 digits of the working AR1344P’s serial number) in the address bar, then press.
e.   Enter the default user name, “admin” and “password”, password in the fields.

Note : You can view and change your Wi-Fi name (SSID) and password, and see all your AR1344P configured as a mesh network (master and slave mode) in your Wi-Fi.

AR1344P Wi-Fi Extender

Technical Specifications

• Wireless Characteristics

– 4×4 5GHz 802.11ax
– 2×2 2.4GHz 802.11ax
– 4 Spatial Streams
– Wave 2 (MU-MIMO)
– Beamforming
– High-power transmit for maximum coverage

• 5GHz Wireless Operating Channels

– 5.15-5.35 GHz, 5.470-5.725 GHz-5.850 GHz
– 20, 40, 80 and 160 MHz bandwidths supported

• Wireless Security

– WPA2 / WPA
– Push-button :
Wireless setup (Mesh / WPS) and Reset support

• Memory

– 256MB Flash and 512MB SDRAM

• Antenna

– Four (4) high performance internal antennas

• Ports

– Two (2) RJ45 Gigabit Ethernet
(10/100/1000Mbps) WAN/LAN ports

• LEDs

– Five (5) LEDs
: Power, WAN, LAN, 2.4G, 5G, WPS

• Management

– TR-069 management client
– Local web access
– Mobile application support (optional)

• Operating Environment

– Operating temperature 0º to + 40ºC
– Relative humidity 8% to 95%;
Non-condensing

• Regulatory Certification

– Wi-Fi Alliance®
– CE
– RoHS
– WEEE

Physical Specifications
– Dimensions : 130 x 130 x 54 mm (W x H x D)

Accessories
– One (1) 12V/1.5A power adapter
– One (1) Ethernet cable
– Quick start guide

< FCC User manual Statements>

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

KAON BROADBAND Co., Ltd. KAONMEDIA Building, 884-3, Seongnam-daero, Bundang-gu, Seongnam-si, Gyeonggi-do, 13517, South Korea

© 2020 KAON BROADBAND Co., Ltd. KAON BROADBAND and the KAON BROADBAND Logo are trademarks of KAON BROADBAND Co., Ltd. Other brands are trademarks or registered trademarks of their respective holders.

This document is for informational purposes only. Information and views expressed in this document may change without notice. For technical support and other information, please contact your sales representative or contact us by email.

www.kaonbroadband.pl [email protected] [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>