Shenzhen Huafurui Technology C9 Bluetooth smart watch User Manual
- June 6, 2024
- Shenzhen Huafurui Technology
Table of Contents
Smart Watch
User Manual
Please carefully read the user manual to ensure safety.
An Introduction to Device
A Power Key
- Short press to brighten the screen
- Long press to power on or off
A Charging Port
B Heart Rate Sensing Area
Connect to the USB cable to charge before turning on the smart watch for the
first time.
APP Binding
Press and hold the power button to start the machine, scan the QR code to download the GloryFit app for pairing , and set the watch in the app.
Notes:
- Please ensure that your mobile Bluetooth and GPS are turned on prior to connection;
- Do not directly pair mobile Bluetooth with watch;
- Support (1) Android 5.0 and more advanced systems; (2) IOS 10.0 and more advanced systems
- Please turn your mobile Bluetooth and GPS on;
- Click “Select device” in the app home page to start searching for devices
Select product type: C9
Enter APP settings
Wear / Replace
Keep a certain distance away from carpus when wearing the watch, and adjust to a comfortable tightness.
Switch on and remove wrist strap
Note:
- Too loose wearing may affect the data accuracy of heart rate;
- Keep its surface clean and dry.
Interface Operation Instructions
1.Dial Plate Change
Long Press the dial plate for 3s to enter the change interface
2. Interface Operation
Find Your Phone, Brightness Adjustment, Do Not Disturb, About the Device (model, MAC/version)
Status Bar
Main Interface Step Counting Sleep
Heart Rate Message Bar
Remark: Slide right and left to enter the shortcut interaction interface; slide up to enter the message notification bar interface and slide down to enter the status settings bar.
Remark: Slide right to exit under the sports mode.
3. Function Introduction
Exercise (a variety of exercise modes are available, record the relevant parameters in the process of exercise )
Heart rate (measure current heart rate and record maximum and minimum data)
Status (record total steps, mileage, calories)
Sleep (record total sleep time, sleep status and awake status)
Music control (control the music playing in the mobile phone when connect to the mobile phone)
Notes for Safety and Product Information
1.Battery Alarm
Do not damage battery via shape items, and do not disassemble it without authorization;
2.Health Alarm
If you are wearing implantable electronic devices such as pacemakers, please
consult your doctor before heart rate measurement;
Equipped optical heart rate sensor flashes green light. If you have epilepsy
or are sensitive to flickering light, please consult your doctor whether you
can use the product;
The device will track your daily activities according to the sensor with the
aim of offering data involving your daily activities such as steps, mileage,
calorie, sleep and heart rate. Please note that they may not be completely
accurate; The device, accessories, heart rate sensor and other related data
are for entertainment and fitness, instead of medical purpose. They can’t help
you diagnose, monitor, treat and prevent any disease or symptom. The heart
rate data is for reference only. We aren’t liable for all results caused by
data deviation.
3.Traffic Safety
Please keep great judgement and ensure driving safety. Do not carry out all activities that may divert your attention; malfunction may occur due to the interference of radio. Please contact the manufacturer to consult about detailed information.
4.Operating Environment
Do not wear the watch when shower;
Do not wear the watch too tight, and keep the part that touches skin dry;
Do not make kids or pets bite the device or its accessories to avoid any
damage;
The watch isn’t waterproof to acid, alkaline solutions, chemical reagent and
other corrosive liquid;
Please use the device within 0-35. Too high or too low environment temperature
may bring device malfunctions.
5.Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try correct the interference by one or more of
the following measures:
– Reorient the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into and outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device conforms to EU ROHS standards. Please refer to IEC 62321, EU ROHS directive 2011/65/EU and Recised directive.
6.Safety Warnings
Unauthorized battery change will lead to explode;
Please handle used battery according to the following descriptions:
Do not dispose old battery and residual wastes together. Please deal with them separately. It is free to handle them at the public collection station. Owners of old appliances should be responsible for bringing them to collection stations or similar stations. A little personal efforts make contributions to the recycle of valuable raw materials and handling of harmful substances.
Tx Frequency:
BLE: 2402MHz~2480MHz
Rx Frequency:
BLE: 2402MHz~2480MHz
MAX power:
BLE: 1.49dBm
Company
Shenzhen Huafurui Technology Co., Ltd.
Address
Unit 1401 &1402, 14/F, Jin qi zhi gu mansion (No. 4 building of Chong wen
Garden), Crossing of the Liu xian street and Tang ling road, Tao yuan street,
Nan shan district, Shenzhen, 518055, P.R. China
Scan here to download
GloryFit
FCC ID:2AHZ5C9
Documents / Resources
|
Shenzhen Huafurui Technology C9 Bluetooth smart
watch
[pdf] User Manual
C9, 2AHZ5C9, C9, Bluetooth smart watch
---|---