Shenzhen Huafurui Technology C5 SmartWatch User Manual
- June 5, 2024
- Shenzhen Huafurui Technology
Table of Contents
Smart Watch
User Manual Please carefully read the user manual to ensure safety.
An Introduction to Device
APP Binding
Long press the Power key to power on – enter the power-on guide to set
language – scan the QR code and download H Band to pair and connect – set the
watch on the APP (not require account registration)
Notes:
-
Please ensure that your mobile Bluetooth and GPS are turned on prior to connection;
-
Do not directly pair mobile Bluetooth with the watch;
-
Support (1) Android 5.0 and more advanced systems; (2) IOS 10.0 and more advanced systems
-
Please turn your mobile Bluetooth and GPS on;
-
Click device connection on the APP home page to search device.
Wear / Replace
Keep a certain distance away from carpus when wearing the watch, and adjust to a comfortable tightness.
Switch on and remove the wrist strap
Note:
- Too loose wearing may affect the data accuracy of heart rate;
- Keep its surface clean and dry.
Interface Operation Instructions
-
Dial Plate Change Long Press the dial plate for 3s to enter the change interface
-
Interface Operation Find Your Phone, Alarm Clock, Brightness Adjustment, Do Not Disturb, About the Device (model, MAC/version)
Remark: Slide right
and left to enter the shortcut interaction interface; slide up to enter the
message notification bar interface and slide down to enter the status settings
bar.
Remark: Slide left
to exit under the sports mode. -
Function Introduction
| Sports Mode (10 sports modes such as outdoor running and walking)
---|---
| Step Counting Mode (Record total step number, mileage, and calorie)
| Sleep Mode (Record total sleep time, deep sleep time, and light sleep time)
| Heart Rate Mode (Measure the current heart rate and record the highest,
lowest, and the previous heart rate)
| Alarm Clock Reminder (Enter More Operations / Alarm Clock Settings on the
APP to set the alarm clock)
| Music Control (Control and play mobile music)
| Find Your Phone (Find your phone via watch within Bluetooth connection
range)
| Camera Control (Enter More Operations / Camera on the APP, and shake to
control)
| Women’s Health (set and remind safe period)
Notes for Safety and Product Information
-
Battery Alarm
Do not damage the battery via shape items, and do not disassemble it without authorization; -
Health Alarm
If you are wearing implantable electronic devices such as pacemakers, please consult your doctor before heart rate measurement;
Equipped optical heart rate sensor flashes green light. If you have epilepsy or are sensitive to flickering light, please consult your doctor about whether you can use the product;
The device will track your daily activities according to the sensor with the aim of offering data involving your daily activities such as steps, mileage, calorie, sleep, and heart rate. Please note that they may not be completely accurate;
The device, accessories, heart rate sensor, and other related data are for entertainment and fitness, instead of medical purposes. They can’t help you diagnose, monitor, treat and prevent any disease or symptom. The heart rate data is for reference only. We aren’t liable for all results caused by data deviation. -
Traffic Safety
Please keep great judgment and ensure driving safety. Do not carry out all activities that may divert your attention; malfunction may occur due to the interference of the radio. Please contact the manufacturer to consult about detailed information. -
Operating Environment
Do not wear the watch when showing, diving and etc.;
Do not wear the watch too tight, and keep the part that touches the skin dry;
Do not make kids or pets bite the device or its accessories to avoid any damage;
The watch isn’t waterproof to acid, alkaline solutions, chemical reagents, and other corrosive liquid;
Please use the device within 0-35℃. The too high or too low environmental temperature may bring device malfunctions. -
Declaration of Conformity
The device conforms to FCC Part 15. All operations should match the following two conditions:
1)The device won’t lead to any harmful interference;
2)The device must accept all interference that can be received, including all the interfaces that may lead to unnecessary operations.
All changes or modifications that aren’t clearly approved by the compliance party may make users fail to operate the device. According to FCC Part 15, the device has passed the test. It conforms to the limitations of class B digital devices with the aim of offering reasonable protection and avoiding all harmful interference brought by equipment in the house. The device generates, uses, and radiates r-f energy, so improper installation and use may bring harmful interference to radio communication. We can’t ensure that the installation in the specific environment may not generate any interface.
If the device truly brings harmful interference to radio or television reception, please turn the device on or off to check. Encourage users to try the following measures to correct such interference:
— Relocate the receiving antenna;
— Increase the distance between the device and receiver;
— Connect the device to a socket (different from the socket used by the receptor);
— Consult the agency or experienced technician to get help.
The device conforms to EU ROHS standards.
Please refer to IEC 62321, EU ROHS directive 2011/65/EU, and Revised directive. -
Safety Warnings
Unauthorized battery change will lead to exploding;
Please handle the used battery according to the following descriptions:
Do not dispose of old batteries and residual wastes together. Please deal with them separately. It is free to handle them at the public collection station. Owners of old appliances should be responsible for bringing them to collection stations or similar stations. A few personal efforts make contributions to the recycling of valuable raw materials and handling harmful substances.
Company
Shenzhen Huafurui Technology Co., Ltd.
Address
Unit 1401 &1402, 14/F, Jin qi Zhi gu mansion (No. 4 building of Chong wen
Garden), Crossing of the Liu xian street and Tangling road, Tao yuan street,
Nan shan district, Shenzhen, 518055, P.R. China
https://www.vphband.com/hband/qrcode/google/index.html
Scan here to download
H Band
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.