Shenzhen Huafurui Technology C3 Smart Watch User Manual
- June 5, 2024
- Shenzhen Huafurui Technology
Table of Contents
- Shenzhen Huafurui Technology C3 Smart Watch
- An Introduction to Device
- APP Binding
- Wear / Replace
- Interface Operation Instructions
- Function Introduction
- Notes for Safety and Product Information
- Declaration of Conformity
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Huafurui Technology C3 Smart Watch
An Introduction to Device
APP Binding
Long press the Power Key to power on – enter power-on guide to set language – scan the QR code and download H Band to pair and connect – set the watch on the APP (not require account registration)
Notes:
- Please ensure that your mobile Bluetooth and GPS are turned on prior to connection;
- Do not directly pair mobile Bluetooth with watch;
- Support (1) Android 5.0 and more advanced systems; (2) IOS 10.0 and more advanced systems
- Please turn your mobile Bluetooth and GPS on;
- Click device connection on the APP home page to search device.
- Select product type: C3
- Click “YES” to bind
- Enter more operations
- Enter APP settings
Wear / Replace
- Keep a certain distance away from carpus when wearing the watch, and adjust to a comfortable tightness.
- Switch on and remove wrist strap
Note:
- Too loose wearing may affect the data accuracy of heart rate;
- Keep its surface clean and dry.
Interface Operation Instructions
- Dial Plate Change
- Interface Operation
Remark:
Slide right and left to enter the shortcut interaction interface; slide up to
enter the message notification bar interface and slide down to enter the
status settings bar.
Remark: Slide left to exit under the sports mode.
Function Introduction
- Sports Mode (10 sports modes such as outdoor running and walking)
- Step Counting Mode (Record total step number, mileage and calorie)
- Sleep Mode (Record total sleep time, deep sleep time and light sleep time)
- Heart Rate Mode (Measure the current heart rate and record the highest, lowest and the previous heart rate)
- Alarm Clock Reminder (Enter More Operations / Alarm Clock Settings on the APP to set alarm clock)
- Music Control (Control and play mobile music)
- Find Your Phone (Find your phone via watch within Bluetooth connection range)
- Camera Control (Enter More Operations / Camera on the APP, and shake to control)
- Women’s Health (set and remind safe period)
Notes for Safety and Product Information
Battery Alarm
Do not damage the battery via shape items, and do not disassemble it without
authorization;
Health Alarm
If you are wearing implantable electronic devices such as pacemakers, please
consult your doctor before heart rate measurement; Equipped optical heart rate
sensor flashes green light. If you have epilepsy or are sensitive to
flickering light, please consult your doctor about whether you can use the
product; The device will track your daily activities according to the sensor
with the aim of offering data involving your daily activities such as steps,
mileage, calorie, sleep, and heart rate. Please note that they may not be
completely accurate; The device, accessories, heart rate sensor, and other
related data are for entertainment and fitness, instead of medical purposes.
They can’t help you diagnose, monitor, treat and prevent any disease or
symptom. The heart rate data is for reference only. We aren’t liable for all
results caused by data deviation.
Traffic Safety
Please keep great judgment and ensure driving safety. Do not carry out all
activities that may divert your attention; malfunction may occur due to the
interference of the radio. Please contact the manufacturer to consult about
detailed information.
Operating Environment
Do not wear the watch when showing, diving and etc.; Do not wear the watch too
tight, and keep the part that touches skin dry; Do not make kids or pets bite
the device or its accessories to avoid any damage; The watch isn’t waterproof
to acid, alkaline solutions, chemical reagent, and other corrosive liquid;
Please use the device within 0-35℃. Too high or too low environmental
temperature may bring device malfunctions.
Declaration of Conformity
The device conforms to FCC Part 15. All operations should match the following two conditions:
- The device won’t lead to any harmful interference;
- The device must accept all interference that can be received, including all interface that may lead to unnecessary operations.
All changes or modifications that aren’t clearly approved by the compliance party may make users fail to operate the device. According to FCC Part 15, the device has passed test. It conforms to the limitations of class B digital device with the aim of offering reasonable protection and avoiding all harmful interference brought by equipment in the house. The device generates, uses and radiates r-f energy, so improper installation and use may bring harmful interference to radio communication. We can’t ensure that the installation in the specific environment may not generate any interface.
If the device truly brings harmful interference to radio or television reception, please turn the device on or off to check. Encourage users to try the following measures to correct such interference:
- Relocate the receiving antenna;
- Increase the distance between the device and receiver;
- Connect the device to a socket (different from the socket used by the receptor);
- Consult the agency or experienced technician to get help.
The device conforms to EU ROHS standards. Please refer to IEC 62321, EU ROHS directive 2011/65/EU, and Revised directive.
Safety Warnings
Unauthorized battery change will lead to exploding; Please handle used battery
according to the following descriptions: Do not dispose of the old battery and
residual wastes together. Please deal with them separately. It is free to
handle them at the public collection station. Owners of old appliances should
be responsible for bringing them to collection stations or similar stations. A
few personal efforts make contributions to the recycling of valuable raw
materials and handling of harmful substances.
Company
Shenzhen Huafurui Technology Co., Ltd.
Address
Unit 1401 &1402, 14/F, Jin qi zhi gu mansion (No. 4 building of Chong wen
Garden), Crossing of the Liu xian street and Tang ling road, Tao yuan street,
Nan shan district, Shenzhen, 518055, P.R. China.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 5mm must be maintained
between the user’s body and the handset, including the antenna. Third-party
belt clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>