HTC HC06 Mobile Phone Holder User Guide
- June 6, 2024
- HTC
Table of Contents
HTC HC06 Mobile Phone Holder
What’s in the box
Holder x1
Quick Start Guide x1
USB cable x1
Warranty card x1
Things to keep in mind with HTC mobile phone holder
- Do not install the wireless charger on the airbag cover or airbag deployment area
- Small amounts of heat are normal when charging and will not affect the performance of the product. If you feel that the phone or the product is overheated, disconnect the power supply and charge after cooling down
- Please do not charge the product near the heat source or around it.
Product Overview
1
| Power on| Red and blue lights flash once, and then solid blue.
---|---|---
2
| Charging| Blue light flashes
3
| Foreign object detected| Red light flashes
4
| Full charge| Blue light solid
Parameter
| Model | HTC HC06 |
|---|---|
| Color | Black |
| Material | ABS+ fireproof PC |
| Input | 5V/2A, 9V/2A,12V/1.5A |
| Output | 5W/7.5W/10W/15W(MAX) |
| Input port | Type-C |
| Applicable size | 4.5-6.7 inch or 58~84mm(Width) |
Component assembly
-
Place the plastic nut on the bolt.
-
Firmly push the universal ball into the bolt.
-
Tighten the plastic nut by turning it clockwise.
-
Once assembly is complete, clip the holder on to a vent inside the car.
Charging your phone
-
Use the included USB-C cable to connect the holder to the car charger. Plug the charger into your car.
-
Touch the sensor zone on the top. The clip arms will open automatically.
-
Place the mobile phone into the wireless charger.
-
With your phone in place, the base will automatically align it with charge coil, and the clip arms will tighten for charging.
Checking product authenticity
-
Scan the QR code on the package with your phone
-
On your phone, enter the last four digits of the code.
-
If the code is authentic, the Search results screen will show that you have a genuine product code.
Warning: If you see the above screen, beware of counterfeiting.
Legal Notice
HTC and HTC logo are the trademarks of HTC Corporation and used under
license by Fortune Ship International Industrial Limited.
Copyright © 2021 Fortune Ship International Industrial Limited.
All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY
KIND OF WARRANTIES.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your
body
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
