milwaukee 48-21-2301 One-Key Bluetooth Tracking Tag Instructions
- June 6, 2024
- Milwaukee
Table of Contents
milwaukee 48-21-2301 One-Key Bluetooth Tracking Tag Instructions
IMPORTANT SAFETY INSTRUCTIONS
WARNING READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
- SAVE THESE INSTRUCTIONS – THIS OPERATOR’S MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUC- TIONS.
- THIS DEVICE IS DESIGNED TO BE POWERED BY (1) CR3032 BATTERY. Do not attempt to use with any other voltage or power supply.
CHEMICAL BURN HAZARD. KEEP BATTERIES AWAY FROM CHILDREN.- THIS DEVICE CONTAINS A LITHIUM BUTTON/ COIN CELL BATTERY. A NEW OR USED BAT- TERY CAN CAUSE SEVERE INTERNAL BURNS AND LEAD TO DEATH IN AS LITTLE AS 2 HOURS IF SWALLOWED OR ENTERS THE BODY. Always secure the battery cover. If it does not close securely, stop using the device, remove the batteries, and keep it away from children. If you think batteries may have been swallowed or entered the body, seek immediate medical attention.
- PROPERLY DISPOSE OF USED BATTERIES IMMEDIATELY.
- DO NOT INCINERATE OR DISMANTLE BATTERIES.
- UNDER ABUSIVE CONDITIONS, LIQUID MAY BE EJECTED FROM THE BATTERY, AVOID CONTACT. IF CONTACT ACCIDENTALLY OCCURS, FLUSH WITH WATER. IF LIQUID CONTACTS EYES, ADDITIONALLY SEEK MEDICAL HELP. Liquid ejected from the battery may cause irritation or burns.
- DO NOT DISPOSE OF DEVICE OR BATTERIES TOGETHER WITH HOUSEHOLD WASTE MATERIAL! Appliance and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
WIRELESS COMMUNICATION
Pursuant to part 15.21 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the product.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules and ISED-Canada’s license exempt RSS standards. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
FCC & IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set
forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
SYMBOLOGY
- Bluetooth Low Energy (BLE)
- Properly Recycle Batteries
- Near-field Communication (NFC)
- Read Operator’s Manual
SPECIFICATIONS
- Cat. No: 48-21-2301
- Volts: 3 VDC
- Battery Type: CR3032
- Battery Life: 3 yr
- Recommended Ambient Operating Temperature: -4°F to 140°F
- FCC ID: .P36-48212301
- IC: 25187-48212301
- Ingress Protection: IP68
- Impact Protection: IK06
GENERAL USE AND CARE
Tracker Activation
- To begin, scan the QR code on top of the Tracker with the camera app on an iOS or Android device. When successful, the device will provide guidance for installing the One-Key app.
- Scanning the QR Code after the app is installed will launch the One-Key app and provide guidance through the activation process.
- Upon activation an audible tone will be heard, indicating the Tracker is ready to use
ONE-KEY™ App / Account Set Up
- To download the ONE-KEY™ app, visit the App Store or Google Play from your smart device.
- Create a User Name and Password and log in to a ONE-KEY™ account.
- Bluetooth and Location Services must be enabled on the mobile device.
- Location Services must be enabled in the Settings section of the App.
Attachment
The tracker is designed to track tools a n d e q u i p m e n t u s i n g t h e ONE-KEY™ App. It will not prevent theft from happening. The tracker can be attached in a variety of orientations. Consider attaching the tracker to prevent tampering. The tracker can be attached using the following options.
-
8 Pan Head Self Tapping Screw
- Glue or Epoxy
- 5/32 Diameter Rivet
- Double sided tape or hook and loop fastening
- Cable or zip tie
- Key ring
WARNING
Follow all warnings and instructions packaged with your product, as well as these label instructions Failure to follow all warnings and instructions could result in shock, fire, and/or serious injury.
-
Determine the best area on the item to attach tracker with minimal risk to abrasion or wear.
WARNING! Do not secure in such a way as to impede the safe use of the product.
Do not attach on or near the following:- vents
- safety notifications
- hand holds
- areas exposed to sparks or heat
- moving parts
- moving parts
- switches or controls
Before using screws or rivets, ensure the space behind the placement is clear
-
Clean the surface area of item thoroughly.
-
If using an adhesive, firmly place the tracker in the desired location, allowing time to adhere.
-
Before using screws or rivets, ensure the space behind the placement is clear. Mounting hole distance is 1-1/2″.
-
Use only mild soap and a damp cloth to clean, since certain cleaning agents and solvents may damage QR code.
For troubleshooting, use ONE-KEY™ app., or visit us athttps://onekeysupport.milwaukeetool.com.
SERVICE – UNITED STATES
1-800-SAWDUST (1.800.729.3878) Monday-Friday, 7:00 AM – 6:30 PM CST or visit www.milwaukeetool.com
Contact Corporate After Sales Service Technical Support with technical,
service/repair, or warranty questions.
Email:
metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases
LIMITED WARRANTY
Every MILWAUKEE Tool & Equipment Tracker Product* is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a Tool & Equipment Tracker product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of two (2) years* after the date of purchase unless otherwise noted. Return of a Tool & Equipment Tracker product to a MILWAUKEE factory Service Center, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. Coin battery cell that is included with a Tool & Equipment Tracker product is not warranted by MILWAUKEE. *The warranty period for the TICK™ Tool and Equipment Tracker is one (1) year from the date of purchase. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSE- QUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a Milwaukee Tool & Equipment Tracker product.
THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY MILWAUKEE® IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE \OWNERS. APPLE AND THE APPLE LOGO ARE TRADEMARKS OF APPLE INC., REGISTERED IN THE U.S. AND OTHER COUNTRIES. APP STORE IS A SERVICE MARK OF APPLE INC. GOOGLE PLAY AND THE GOOGLE PLAY LOGO ARE TRADEMARKS OF GOOGLE INC
NFC AND THE N-MARK ARE TRADEMARKS OR REGISTERED TRADEMARKS OF NFC FORUM, INC. IN THE UNITED STATES AND IN OTHER COUNTRIES AND ANY USE OF SUCH MARKS BY MILWAUKEE® IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.