Honeywell CF4680 2D Imager Module User Guide
- June 6, 2024
- Honeywell
Table of Contents
Honeywell CF4680 2D Imager
What is the CF4680 2D Imager Module?
The CF4680 is a 2D imager module designed to be integrated into fixed mount enclosures, such as a self-service kiosk. It includes:
- N4680 scan engine
- USB interface (USB-B connector)
- Exit window
- Movement detector used to start a reading session
- User feedback pins
Required Accessories
- Standard USB-A to USB-B cable
Additional Documentation
The following documents are available for the CF4680:
- CF4680 Installation Guide
- N4680/CF4680 User Guide
These documents are available from your local Honeywell OEM representative.
CF4680 Front View
CF4680 Back View
PCB View
Connecting the CF4680 to a Host
By default, the CF4680 is in USB PC Keyboard interface.
- Connect a standard USB cable (standard USB-A to USB-B) to the CF4680 and to the USB port on the host.
- Power-up the host.
- Verify that the CF4680 is on by presenting a bar code in front of the scan window. The white LED should turn on and read the bar code.
Note: The CF4680 does not beep to indicate a good read unless this has been setup by the user with the user feedback pins. See the CF4680 Installation Guide for more details (available from your local Honeywell OEM representative).
Distance Selection Switch
Use this switch to select the range to be used to detect an object and trigger the scan engine. The distance is measured from the outside of the exit window.
- Position 1—0 to 10 cm (4 in)
- Position 2—0 to 20 cm (8 in)
- Position 3—0 to 30 cm (12 in)
Configuration
You can configure your scanner two ways:
- Reading configuration bar codes
- Using the EZConfig Cloud for Scanning tool
Configuration Bar Codes
Scan configuration bar codes to set up your scanner. All available
configuration bar codes are available in the N4680/CF4680 User Guide. Contact
your local Honeywell OEM repre-sentative for more information.
EZConfig for Scanning Tool
Use the EZConfig for Scanning tool to configure your scanner Online:
- Go to the Honeywell https://hsmftp.honeywell.com.
- Register (if you haven’t already), then login.
- Browse to Software > Barcode Scanners > Software > Tools and Utilities > EZConfig for Scanning > Current and download the tool.
- Open EZConfig to configure your scanner.
Basic Setup
Here are some basic menu bar codes that may be useful for test-ing. For more
setup options see the N4680/CF4680 User Guide (available from your local
Honeywell OEM representative).
Note : The * symbol indicates the default value.
Interface
For USB serial interface, you must install the USB driver before connecting
your scanner. Contact your local Honeywell OEM representative to get the
latest USB driver.
USB Serial Interface
Keyboard Country Layout
The default keyboard is United States.
LED Illumination
Use this setting to change the LED illumination brightness. Low *
Mechanical Dimensions
User Feedback Pins
User feedback pins give you access to the trigger, beeper and good read lines
on the scan engine. See the CF4680 Installation Guide for details on these
pins (available from your local Honey-well OEM representative).
Exit Window
The exit window is made of chemically strengthened glass and is scratch-
resistant. To clean the window, use one of the following:
- Sani-Cloth HB wipes
- Sani-Cloth Plus wipes
- Super Sani-Cloth wipes
- Isopropyl Alcohol wipes (70%)
- CaviWipes™
- Virex® 256
- 409 Glass and Surface Cleaner
- Windex Blue
- Clorox Bleach – 10%
- Gentle dish soap and water
Note : For best scanner and movement detector performance, do not cover the existing exit window with another window or use a different exit window.
Customer Support and Technical Assistance
For customer support, contact your local Honeywell Sales Representative or
fill out the support form at sps.honeywell.com/us/en/contact-
us.
Limited Warranty
For warranty information, go to
sps.honeywell.com/us/en/support/productivity/warranties.
Patents
For patent information, see sps.honeywell.com/us/en/support/patents.
Disclaimer
Honeywell International Inc. and its affiliates, subsidiaries, and other
entities forming part of Honeywell group (“HII”) reserves the right to make
changes in specifications and other information contained in this document
without prior notice, and the reader should in all cases consult HII to
determine whether any such changes have been made.
The information in this publication does not represent a commitment on the
part of HII.
Honeywell warrants goods of its manufacture as being free of defective
materials and faulty workmanship during the applicable warranty period.
Honeywell’s standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgment or consult
your local sales office for specific warranty details.
If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.
In no event shall Honeywell be liable for consequential, special, or indirect
damages. While Honeywell may provide application assistance personally,
through our literature and the Honeywell website, it is buyer’s sole
responsibility to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is
believed to be accurate and reliable as of this writing. However, Honeywell
assumes no responsibility for its use.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
Copyright 2021 Honeywell International Inc. All rights reserved.
Web Address: sps.honeywell.com/us/en/products/sensing-and-
iot
Other product names or marks mentioned in this document may be trademarks or
registered trademarks of other companies and are the property of their
respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>