XTREME POWER XBB81022 Portable Smart Watch Charger Instruction Manual
- August 19, 2024
- XTREME POWER
Table of Contents
XTREME POWER XBB81022 Portable Smart Watch Charger
PRODUCT INTRODUCTION
Thank you for purchasing the Portable Smart Watch Charger. This compact and versatile charger is designed to keep your watch charged on the go. Please read this manual carefully to ensure proper usage and maintenance.
SAFETY AND CARE INSTRUCTIONS
- Read all the instructions before using the product and then store them for future reference. Failure to follow these safety instructions could lead to fire, electrical shock, personal injury, property damage, or damage to the product.
- This product contains a non-replaceable rechargeable lithium-ion battery. When discarding, follow your local / state guidelines.
- Do not be exposed to rain, moisture, or other liquid. Do use near water such as swimming pools, bathtubs, or sinks.
- If it becomes wet, immediately unplug the product from a power source. Do not handle the unit, USB cord, or wall charger with wet hands.
- Do not charge, or use, the product if it has been submerged in water, or if water has gotten inside the product.
- Do not expose to heat sources, the sun, or leave in a hot vehicle. Do not dispose of it in a fire.
- Do not expose the product to extremely high or low temperatures.
- Use this product in a location with a temperature of 32°F – 95°F.
- Prolonged exposure to extreme heat or cold reduces battery longevity. Exposure to fire or temperatures above 170°F could cause serious damage and explosion.
- Do not dissemble, there are no serviceable parts inside. Do not drop. Do not use it damaged or modified or if you see any bulging, swelling, leakage, or other abnormality.
- Never insert objects other than the specified cables into the product. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not modify or try to use it for a non-intended purpose. Do not use the power bank more than its output rating. Overloading outputs above the rating may result in a risk of fire or injury.
- Do not place anywhere where the product would become crushed or punctured.
- Place the charger on a flat, sturdy surface during charging. Charge in a well-ventilated area and make sure it is not covered with any material.
- Power banks generate heat when charging, and the power bank may temporarily stop charging if it gets too hot.
- Charge using the correct wall charger, and make sure that the charger is inserted all the way into the electrical outlet.
- Disconnect the charger once the product is fully charged
- This product is not a toy. Keep out of reach of children or those that require supervision.
- Do not use abrasive cleaning solvents to clean the unit.
- Note: Lithium-ion batteries will self-discharge over time. To ensure battery life, do not store the product in an uncharged state for a length of time.
- If left in a discharged state for too long a lithium-ion battery will no longer have the ability to be recharged.
FEATURES
- Silicone loop for attaching to keys, backpack, etc.
- A digital display indicates charge percentage
- Type-C port for recharging
- Power button
GETTING TO KNOW YOUR PRODUCT
OPERATION
Charging the Power Bank:
Connect the Type-C input port of the power bank to a compatible power source using the provided cable. The LED display will illuminate to show the battery percentage.
Charging Devices
- Place the desired smartwatch on the wireless charging pad. The smartwatch will indicate if it is charging.
- If nothing happens, please adjust your smartwatch on the pad until it is properly placed.
- Note: This power bank is intended to wirelessly charge smart watch devices.
- It will not intended to charge phones of other wirelessly chargeable devices.
ONE YEAR WARRANTY
- Xtreme warrants its products for one year against defects in manufacturing under regular consumer use with the original receipt of retail purchase.
- We believe in our products and want to provide you with a replacement if needed, but we have to know about the problem while the product is still under warranty.
- If you discover a defect covered by this warranty, please contact us about receiving a replacement.
- To use the product’s warranty the customer must provide proof of the retailer’s receipt.
- Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect. If there is not a manufacturing defect, shipping and handling will be applied.
- Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device, or personal property.
- For instructions about how to obtain warranty service for your product, please contact Customer Service: customerservice@xtremecables.com.
- Content is subject to change without prior notice. Some content may differ from how the product works with your specific device.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
RF EXPOSURE COMPLIANCE
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
SPECIFICATIONS
- Battery capacity: 1,200 mAh
- Type-C input: 5V
- Output: 2.5W
WHAT’S INSIDE
- Smart Watch Charger Manual
- 855.999.8041 WWW.XTREMECABLES.COM
Documents / Resources
|
XTREME POWER XBB81022 Portable Smart Watch
Charger
[pdf] Instruction Manual
XBB81022, XBB81022 Portable Smart Watch Charger, Portable Smart Watch Charger,
Smart Watch Charger, Watch Charger, Charger
---|---