ickle bubba Cosmo All in One i-Size Travel System Instructions

Cosmo All in One i-Size Travel System
Instructions

Cosmo All in One i-Size Travel System

Dear Parents
Congratulations on the purchase of your Cosmo travel system!
Your child’s safety can only be guaranteed if this product is used according to these instructions. Therefore, please take time to read through this instruction manual carefully and keep for future reference.

https://www.icklebubba.com/product-info-safety/product-user- guides

Product may differ slightly from image shown

FEATURES

1. Adjustable handle
2. Stroller Hood
3.  Seat Recline
4. Handle adjustment button
5. Seat Unit/ Pram Body Toggle
6.  Bumper Bar
7. Bumper Bar Release
8.  5 Point Safety Harness
9.  Seat Unit/ Pram Body Removal Button
10. Convertible Seat Unit/Pram Body
11. Locking Latch Clip
12.  Shopping Basket
13.  Built in Suspension
14.  Rear Wheels
15.  Front Wheels
16.  Brake
17.  *Car Seat Adaptors
18.  Apron/Footwarmer
19.  Raincover
20. Changing Bag & Mat

*Only included when purchased with a car seat.
COMPONENTS

1. Chassis
2.  Seat Unit/Pram Body
3. Bumper Bar
4.  Front Wheels
5.  Rear Wheels
6.  Rear Wheel Axle & Break

SET UP & ASSEMBLY

Unfolding the frame Unfolding the frame

1. Unhook the latch, located on the right hand side of the frame
2.  Lift the handlebar in the direction of the arrow until the frame locks into place

Installing the Rear Wheels Installing the Rear Wheels

1. Push the rear wheels onto each side of the axle, brake cluster side first .
2.  Fix the smallest part of the locking cap over the end of the axle first, then attach the larger part over the top. Now push the hub cap into place over the top. Repeat for both wheels, ensuring both sides are securely locked in place.
3.  Once the wheels are fixed onto the axle, place the axle onto the frame of the chassis. Push it upwards until you hear a ‘click’ on both sides.
4.  To remove the rear wheel axle, push both the metal push pin clips inward, and slide downwards until the axle is clear of the chassis.

Installing the Front Wheels Installing the Front Wheels

1. Push each front wheel onto the2 front wheel bayonet until you hear a ‘click’. Ensure it is securely attached to the stroller before use.
2.  To remove the front wheels, locate the release button which can be found at the top of the wheel bayonet, on the inner side. Push the button in firmly and the wheel will disengage

Attaching Seat Unit Attaching Seat Unit/ Pram Body to Chassis Frame

1. Align the seat unit adapters with the corresponding holders on the pram frame.
2. Push the seat unit downwards until you hear an audible ‘Click’. Ensure that the seat is securely fastened before use.
3.  To remove the seat unit, press the release buttons on both sides of the seat frame and lift the seat upwards.

Seat Reversal

Installing the Pram Hood

Installing the Pram Hood

1. Insert the metal frame of the hood into the corresponding receptors located on the pram frame.
2. Align the zip located on the back of the hood to the zip located on the seat unit/pram body and fasten.
3. To remove the hood, unfasten the zip, then press both of the hood connector buttons and pull the metal hood frame upwards.

Attaching and Removing the Bumper Bar Attaching and Removing the Bumper Bar

1. Align the bumper bar with the fitting on the frame and push inwards until you hear a ‘click’ on each side and see the safety release buttons are in the raised position.
2.  To remove, press each of the safety release buttons (indicated above) and pull the bumper bar outwards.

IMPORTANT: During use, always ensure break is engaged before removing or attaching the bumper bar.
Converting Pram Body to Seat Unit Converting Pram Body to Seat Unit

1. To convert pram body to seat unit, connect the two clips located at the bottom of the pram body/seat unit.
2.  Tighten the toggle located on the top of the pram body/seat unit by holding the strap taught and pushing the toggle upwards. Ensure that all fabrics and buckles are secure before use.
3. To convert seat unit back into pram body, disconnect the two clips located at the bottom of the seat unit and loosen the toggle at the top by squeezing the two side buttons and pulling down. Push the fabric downwards from the inside to ensure the pram body lies flat.

Using the Safety Harness Using the Harness

1. Clip both shoulder strap fastenings into the loops located on the side straps.
2.  Push the two side strap clips into the centre clasp until both sides click in securely. Adjust strap lengths as required.
3. To undo the harness, press the buckles in the centre of the harness and pull apart.

Removing the Harness
When using in pram mode the harness must be removed. Place your hand through the Velcro pening at the back of the seat unit/pram body, thread each of the plastic tabs through the openings in the wooden base and pull through the front of the seat fabric. To reinstall, repeat the process in reverse and ensure that each harness belt is secured.
Attaching Footwarmer Attaching Footwarmer
Align the zip located on the edge of the footwarmer to the zip located on the seat unit/ pram body and fasten. Fold the flap around the bumper bar and fasten into place with the press studs.
Using the Privacy Panel Using the Privacy Panel

1. To use the privacy panel, detach the apron fastenings from around the bumper bar.
2. Reattach the fastenings to the inside of the hood.

Using the Brakes Using the Brakes

1. To engage the brake, apply a light downward pressure to the brake lever.
   Ensure that the brakes have been applied correctly and that the stroller will not move.

2.  To release the breaks, gently lift up the brake l eve r.

Using the Front Wheels![ickle bubba Cosmo All in One i-Size Travel System

• Using the Front Wheels](https://manuals.plus/wp-content/uploads/2024/01 /ickle-bubba-Cosmo-All-in-One-i-Size-Travel-System-Using-the-Front-Wheels.jpg) Using the Front Wheels

  1. Lift up the switch at the front of the wheel to unlock.
  2.  Push down the switch to engage the wheel lock.

Operating the Seat Recline Operating the Seat Recline

1. To recline the seat, lift the handle located at the top of the seat unit.
2.  The seat has 3 positions – Fully reclined, mid recline and upright.
3.  Please note that the fully upright position should only be used for a child over 6 months old.

NOTE: When using from birth please make sure the pushchair is in the pram mode.
Folding down the Stroller Folding down the Stroller

1. Ensure to remove the pram body/seat unit before folding. Locate the fold levers (on each side of the chassis) and the fold lock button (on the right hand side of the chassis). To fold, press down the fold lock button while pulling the fold levers towards the handle bar.
2.  Once the stroller begins to fold, release the folding button and allow to fully fold.
3.  Secure the stroller in the folded position by ensuring the latch has fastened.

Connecting Car Seat to Stroller or Pram

1. Prepare your pram or stroller for car seat fitment. Refer to your stroller manual for guidance in attaching the car seat adaptors correctly.

2.  Lift and lower the car seat onto the stroller or pram adaptors so they slide into the slots found underneath the left and right handle hubs of the car seat.
   NOTE: The car seat must be parent facing.

3. When correctly aligned with the adaptors, apply even pressure on the left and right sides of the car seat until you hear a ‘click’ to confirm it is locked in position.

4. To release the car seat from the pram or stroller, press and hold each of the adaptor release buttons, whilst simultaneously lifting the car seat up. The adaptor release buttons are located above the adaptors, on the inside of the carry handle on the car seat as shown.

IMPORTANT SAFETY INFORMATION

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.
Your child’s safety may be affected if you do not follow these instructions. Failure to follow these warnings and the instructions could result in serious injury or death.
The Cosmo pushchair in pram mode is suitable for children from birth up to a maximum weight of 9kgs.
The Cosmo seat unit is suitable for children from 6months up to 22kgs or 4 years (whichever comes first).
USING COSMO IN PRAM MODE:
WARNINGS

• Never leave the child unattended
• This product is not suitable for running or skating.
• This product is only suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. Maximum weight 9kgs.
• The head of the child in the pram mode should never be lower than the body of the child.
•  To Keep the baby safe if using a mattress please make sure the thickness is 20mm or less.
•  This pram mode is not intended to use on its own as a sleeping unit.
• It is manufactured to use with the Cosmo chassis
• Remove the harness when in pram mode using the instructions in this manual.
•  Keep away from fire and other sources of strong heat.

WARNINGS
USING COSMO IN SEAT MODE:

• The seat unit is not suitable for children under 6 months.
•  Always use the restraint system.
• Ensure that all the locking devices are engaged before use and when placing /removing a child.
• Do not let the child play with this product.
• Check the stroller body or seat unit attachment devices are correctly engaged before use.
•  To avoid injury ensure that your child is kept away when unfolding and folding this product.
• Always use the crotch strap in combination with the waist belt.
• Do not carry more than one child in this vehicle.
• Do not use if any part of the product is broken, torn or missing.
•  Keep away from fire and other sources of strong heat.

WHOLE PRODUCT
WARNINGS

• Ensure your child wears a correctly fitted and adjusted harness at all times.
• Use the parking brake when stationary and when removing or placing the child into the stroller.
• Any additional load attached to the pushchair will affect the stability and safety of the vehicle.
• Do not use a platform with this product as it may render the product unsafe.
• Do not lift the pram body or seat unit using the bumper bar.
• Only use the seat unit, pram body provided with the Cosmo 2 in 1 Pushchair.
• Do not use replacement parts or accessories other than those approved by Ickle Bubba.
• A basket is provided for the carriage of goods up to a maximum weight of 3kg.
• Store in a safe place away from children.
• To avoid the risk of suffocation, keep all plastic packaging and materials out of reach from children.
• Recommended to be used with the Ickle Bubba Stratus Car seat. When using a car seat with chassis, please note this does not replace a cot or bed and should your child need to sleep, then it should be placed in a suitable pram body, cot or cot bed.
• Recommended to be used with the Ickle Bubba Stratus car seat. A basket is provided for the carriage of goods up to a maximum weight of 3kg.
• Store in a safe place away from children.
•  To avoid the risk of suffocation, keep all plastic packaging and materials out of reach from children.

THIS BABY STROLLER HAS BEEN APPROVED IN ACCORDANCE TO EN1888-2:2018+A1:2022

CARE AND MAINTENANCE

• Always check the stroller for any wear or damage.
• Storage – Store the stroller in a dry place, do not store in a damp or hot environment. Never leave in sunlight for prolonged periods.
• Chassis – Regularly lubricate all moving parts. Polish metal with a clean dry cloth.
• Wheels – Use a soft brush or cloth.
• Seat Unit/Carry cot outer/Removable Canopy – Sponge clean with warm soapy water. Rinse with clean water to avoid staining. Dry naturally away from irect heat and prolonged sunlight. Do not use strong detergents or bleach .
• Carry cot mattress removable cover/ Apron – Handwash at 30 degrees. Do not tumble dry. Do not iron. Do not use bleach.

Dimensions

WARRANTY INFORMATION

Please ensure you have registered your product online and keep your proof of purchase for any future claim. We will not be able to investigate any claims without this. If you register your product with us online within 28 days of receiving your product, we will extend all parts/items with standard 2 year warranty to 4 years from the date of purchase, at no extra cost. Our warranty covers you against manufacturing defects, you are not covered against the below:

• Normal wear and tear.
• Incorrect use, cleaning or storage.
• Damage caused by not following your Ickle Bubba product user guide.
• Modifying or altering your product with non-approved parts, or by an unauthorised agent.
• Accidental damage (including airline damage) or damage caused by non-domestic use.
•  Damage caused by use of accessories not recommended by Ickle Bubba, or advised against in your user guide.

If you have any problems with your Ickle Bubba product caused by a manufacturing defect when under warranty, we offer a 4-step speedy aftercare service within 5 working days. We advise customers to check the contents of their product within 14 days of delivery. Please contact us within 7 days if you discover a fault with your product.
We are more than happy to fulfil our warranty commitments. Ickle Bubba have the right to offer a repair, provide a replacement self-fit part/spare, or a full replacement product. If your product design, colour or fabric has been discontinued we may be required to offer an alternative equivalent product. If a returned item is found to have a fault not related to a manufacturing defect, Ickle Bubba reserve the right to charge for any repairs carried out or spares/ replacements provided.
The warranty applies in the country of purchase only. The warranty applies to the original purchaser and is non-transferrable. It does not cover second hand purchases.
*Standard and extended warranty is only applicable on certain parts/items, please check the warranty overview table for further details.
Your consumer statutory rights are not affected by the warranty.

*4 year extended warranty applies to these parts/items only.
Register your product
To register your product and activate your extended warranty, please visit our website:
UK – https://icklebubba.com/pages/warranty
ROI – https://ie.icklebubba.com/pages/warranty-information
FR – https://fr.icklebubba.com/pages/informations-sur-la-garantie
DE – https://de.icklebubba.com/pages/garantie- informationen
Customer service
01554 707022
09:00 – 17:00 Monday – Thursday
You will need the original order number as proof of purchase
Please retain your original receipt of purchase and keep with this instruction booklet

https://www.icklebubba.com/product- info-safety/warranty-information

[email protected]
Atlantic House, Unit 2, Atlantic Close, Swansea, SA7 9FJ
Unit 125, 3 Lombard Street East, Dublin 2, DO2 HC78
www.icklebubba.com

References

• Travel Systems, Pushchairs, Car Seats & Furniture | Ickle Bubba
• Warranty Information – Ickle Bubba
• Warranty Information – Ickle Bubba
• Warranty – Ickle Bubba
• Warranty Information – Ickle Bubba

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>