SHADOW CREATOR JIMO K02 BT Controller User Guide
- June 6, 2024
- SHADOW CREATOR
Table of Contents
- SHADOW CREATOR JIMO K02 BT Controller User Guide
- JIMO start your smart life
- This is a list of JIMO accessories
- Safety and Comfort
- Stay comfortable
- Righ t
- Top
- Bottom
- Installation Accessories
- Put on your device
- Bluetooth Handle
- JIMO
- 1. Application List
- 2. WiFi connection
- Selection and Confirmation
- How to edit the window
- Gesture
- Gesture
- Return
- FCC Warning
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SHADOW CREATOR JIMO K02 BT Controller User Guide
JIMO start your smart life
JIMO from Shadow Creator will change the way you communicate, create,
cooperate and explore. Turn it on, and start your smart life.
Before that, please read this instruction carefully, and set up your device.
This is a list of JIMO accessories
For more accessories, please visit www.shadowcreator.com.
Note: This product type approval code is displayed on the nameplate of the
appearance of the product.
Note: This product type approval code is displayed on the nameplate of the
appearance of the product.
Safety and Comfort
Use in a safe environment Please use JIMO in a safe space without obstacles.
Please do not use JIMO when driving or doing other things with security risks.
Stay comfortable
Please take a few breaks when using JIMO for the first time. If you feel
unwell, such as dizziness, motion sickness, nausea, confusion,
headache, eye fatigue, etc., please stop using it immediately
Righ t
Top
Bottom
Installation Accessories
How to properly install nose pads, ear hook, and external battery
Please align slot here
Nose pad is installed
Please align at the back of the leg
Please align the port
Please align the port
Put on your device
How to put on JIMO correctly and comfortably?
Bluetooth Handle
Make it easier for you to experience the product
In 30 mode, the handle is presented to you as an air mouse
Gesture control and voice control can only be used after wedgit is turned on on the main interface.
JIMO
User Operating System Guide
1. Application List
Click the right arrow to bring up the list of installed apps
2. WiFi connection
- Open the “Setting” button on the right
- Click “Network and Internet”
- Click “WLAN”
- Select the WIFI you need to connect and enter the password
- Connection succeeded
Selection and Confirmation
Use the pointer to aim at the content displayed on the screen and press the
handle touchpad.
The selection and confirmation operations in the system can be completed
How to edit the window
Align the status bar at the top of the task window, and long-press to drag the
window to any position.
Through the small icons in the status bar of the task window, the window can
be zoomed in, zoomed out, zoomed in, zoomed out, fixed in full screen, and
closed.
Gesture
Gesture
Return
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>