Zhuhai Yali Technology ISB330 Portable Bluetooth Speaker Instruction Manual
- June 6, 2024
- Zhuhai Yali Technology
Table of Contents
ISB330 Portable Bluetooth Speaker
Please read this instruction manual before you operate the player and keep the
manual for your reference in the future.
Features
-Bluetooth wireless 5.0: range 33 ft.
-Micro SD card port
-FM Radio
-AUX IN
-Voice prompts
-Volume wheel
-Micro-USB port for battery recharge
Includes
-User’s Guide
-Micro-USB to the USB charging cable
Controls
- Display
- POWER/SOURCE: Short Press to select your preferred source. Long press 5s to switch the unit between on and standby mode.
- Display ON/OFF: Short Press to turn on/off the display. Long press 5s to turn on/off the voice prompt.
- : In Bluetooth/Micro SD mode: The previous section. In FM mode: The previous station.
- : In Bluetooth/Micro SD mode: Next section. In FM mode: Next station.
- : In Bluetooth/Micro SD mode: Short Press to play/pause a track, Long press to enter pairing mode. In FM mode: Long press to automatically search station.
- Volu me Wheel: Spin volume wheel clockwise to raise volume level. Spin counter-clockwise to the lower volume level.
INSTRUCTION
Pairing Bluetooth Enabled Devices
The first time you use your Bluetooth device with this player, you will need to connect or “pair” it with the player first.
- Switching to Bluetooth mode. The display will show “BT”. Flashing “BT” indicates that the system has entered pairing mode and will be searchable by your Bluetooth- abled device.
- Activate your Bluetooth-enabled device and select the search mode. “ISB330 ”will appear on your Bluetooth device list. Select “ISB330 ” in the pairing list.
- The “BT” letter on display will become solid if pairing succeeds.
AUX IN
Connect one end of a 3.5 mm audio cable (not included) to the speaker’s AUX
INPUT jack, then connect the other end to the output jack of your audio
device.
Micro SD card
This speaker can play audio files such as MP3 that are stored on a micro SD
card. Insert your micro SD card (not included) into the micro SD card socket
for playback.
FM
When you switch the unit to the radio mode, you can listen to the FM radio
program in this mode.
- In FM mode, long-press the play/pause key on the unit to automatically search the station. It will save the station once searching is completed.
- Press the ****or on the unit to select a station.
Charging the speaker
To charge the internal battery, plug the USB charging cable into the DC Power
Input on the speaker and a powered-on
computer or USB power adapter (not included) and standard power outlet.
Charging time is approximately 5 hours 30min.
When the battery is low a voice will announce “Low Battery,” then the unit
will automatically power OFF. (Important: To avoid a complete discharge of the
battery, charge the speaker at least once every month.)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>