Toprime VS6612X Vacuum Sealer Machine User Manual

Toprime VS6612X Vacuum Sealer Machine

Product Information

INDICATOR LIGHTS
SEAL BUTTON
VAC & SEAL BUTTON
STOP AND PULSE VACUUM BUTTON| SILICONE CONTACT BAR
SEALING FOAM GASKET
SEALING STRIP
BAG STOPPER
VACUUM CHAMBER
VACUUM NOZZLE
ACCESSORY BUTTON
VS6611X| DRY/MOIST FOOD SETTING BUTTON
INDICATOR LIGHTS
SEAL BUTTON
VAC & SEAL BUTTON
STOP AND PULSE VACUUM BUTTON| SILICONE CONTACT BAR
SEALING FOAM GASKET
SEALING STRIP
BAG STOPPER
VACUUM CHAMBER
VACUUM NOZZLE
ACCESSORY BUTTON

Product Usage Instructions

VS6612X

• DRY/MOIST FOOD SETTING BUTTON: Use this button to select the appropriate setting for sealing dry or moist food. The corresponding indicator light will be illuminated when the function is selected.
• SEAL BUTTON: Close the cover and press this button to only seal the bag. Wait for 60 seconds between seals to allow the appliance to cool down.
• VAC & SEAL BUTTON: Close the cover and press this button to vacuum the bag and seal it. Wait for 60 seconds between uses to allow the appliance to cool down.
• STOP AND PULSE VACUUM BUTTON: During any working status, press this button to stop the current processing immediately. In standby mode, press and hold the PULSE/STOP button to activate the function. The operator can manually control the vacuum pressure by this button according to different food. After achieving the desired vacuum effect, release the button and choose SEAL to seal the bag.
• INDICATOR LIGHTS: The indicator light will be illuminated when VAC / VAC SEAL / SEAL functions are working.

VS6611X

• DRY/MOIST FOOD SETTING BUTTON: Use this button to select the appropriate setting for sealing dry or moist food. The corresponding indicator light will be illuminated when the function is selected.
• SEAL BUTTON: Close the cover and press this button to only seal the bag. Wait for 60 seconds between seals to allow the appliance to cool down.
• VAC & SEAL BUTTON: Close the cover and press this button to vacuum the bag and seal it. Wait for 60 seconds between uses to allow the appliance to cool down.
• STOP AND PULSE VACUUM BUTTON: During any working status, press this button to stop the current processing immediately. In standby mode, press and hold the PULSE/STOP button to activate the function. The operator can manually control the vacuum pressure by this button according to different food. After achieving the desired vacuum effect, release the button and choose SEAL to seal the bag.
• INDICATOR LIGHTS: The indicator light will be illuminated when VAC / VAC SEAL / SEAL functions are working.

FUNCTIONS

VS6612X

1. DRY/ MOIST FOOD SETTING BUTTON

   • It will take longer time to seal moist food than dry food.
   • The indicator light will be illuminated when the corresponding function selected.

2. SEAL BUTTON
   Close the cover, press the SEAL button if you only want to seal the bag. (Wait for 60s between seals to allow appliance to cool down)

3. VAC & SEAL BUTTON
   Close the cover, press it to vacuum the bag and seal it. (Wait for 60s between uses to allow appliance to cool down)

4. STOP AND PULSE VACUUM BUTTON

   • During any working status, press STOP button to stop current processing immediately.
   • In the standby mode, press and hold the PULSE/STOP button to activate the function, when it starts to PULSE vacuum, the operator can control the vacuum pressure manually by this button according to different food. After achieving the desired vacuum effect, release the button and choose SEAL to seal the bag.

5. INDICATOR LIGHTS
   T he indicator light will be illuminated when VAC / VAC SEAL / SEAL working.

VS6611X

1. DRY/ MOIST FOOD SETTING BUTTON

   • It will take longer time to seal moist food than dry food.
   • The indicator light will be illuminated when the corresponding function selected.

2. SEAL BUTTON
   Close the cover, press the SEAL button if you only want to seal the bag. (Wait for 60s between seals to allow appliance to cool down)

3. VAC & SEAL BUTTON
   Close the cover, press it to vacuum the bag and seal it. (Wait for 60s between uses to allow appliance to cool down)

4. STOP AND PULSE VACUUM BUTTON

   • During any working status, press STOP button to stop current processing immediately.
   • In the standby mode, press and hold the PULSE/STOP button to activate the function, when it starts to PULSE vacuum, the operator can control the vacuum pressure manually by this button according to different food. After achieving the desired vacuum effect, release the button and choose SEAL to seal the bag.

5. INDICATOR LIGHTS
   T he indicator light will be illuminated when VAC / VAC SEAL / SEAL working.

PRODUCT FEATURES

1. SILICONE CONTACT BAR
   Work with sealing strip to make optimal sealing.

2. SEALING FOAM GASKET
   Objective to ensure vacuum chamber is airtight so the bag can be vacuumed properly.

3. VACUUM NOZZLE

   • This is used for removing air from bags / canisters / bottles.
   • Do not block the vacuum nozzle when vacuuming a bag. Accessory hose is required when vacuuming a canister or bottle.

4. VACUUM CHAMBER
   An airtight chamber for vacuuming.

5. SEALING STRIP
   Work with silicone contact bar for sealing function.
   Note: Do not remove the high-temperature adhesive tape here, otherwise the function will fail.

6. BAG STOPPER
   To prevent the vacuum bag from being placed outside of the vacuum chamber.

7. ACCESSORY BUTTON
   Press to vacuum canister/wine stopper with accessory hose.

OPERATION MANUAL

1. Place the open end of bag in the vacuum chamber, ensure the bag does not cover vacuum nozzle. (When vacuum moist food, it is recommended to leave 10cm space between the opening of bag and food.)
2. Close the lid and press on both end of the lid. You will hear a “clicking” sound with both release buttons pop up if the lid is properly locked.

3. Press VAC SEAL if you want to vacuum & seal the bag.
   Press SEAL button if you want to seal the bag only.

4. When SEAL indicator Light turns off, process completed. Press release buttons at both ends to open the lid and remove the sealed bag.

EXTERNAL VACUUM SYSTEM

1. Vacuum accessory hose fits vacuum containers with vacuum ports smaller than 1 inch.
2. Insert the hose into the round external suction port, which is on the left side of the vacuum machine.

3. Connect the other end of the hose to the vacuum port on the lid of the container.(It is recommended to leave at least 1.2 inches of space between the food and the top edge of the container)
4. Press the VAC button on the left side of the vacuum sealer.

NOTE:

1. The product does not contain a vacuum container or wine stopper.
2. Before using the hose, please ensure that the container used is suitable for vacuum sealing.

TIPS ON BAG / ROLL CUTTER

Close the upper lid cover, pull out the desired bag length, hold the bag with one hand, and slide the bag cutter across the roll to obtain the desired bag length.

TROUBLESHOOTING

1. Nothing happens when the power cord is plugged into appliance.
   • Make sure the power cord is not damaged.
   • Make sure the power cord is correctly plugged into the electrical outlet and appliance.
2. Appliance is plugged in, but cannot vacuum.
   • Ensure the lid is properly closed.
   • Ensure the opening end of the bag is correctly placed into the vacuum chamber.
   • Check if the bag is punctured.
   • Check if the foam sealing gasket is deformed or damaged.
3. Air is removed from the bag, but now re-entered.
   • Check if there is a hole or puncture on the bag. It may be punctured by sharp items. Use a new bag if necessary.
   • Check the sealing seam. Any wrinkle along the sealing seam may cause air re-entering. If yes, simply cut the sealed edge and re-seal.
   • If there is moisture or liquid at the opening end , cut the bag and wipe it away. Then choose MOIST FOOD setting and reseal.
   • If the food has been stored for a long time and the bag is full of gases, it may spoil and suggest to discard.
4. Note:
5. To prevent the appliance from overheating, allow it to cool for 60 seconds between uses. Keep the lid open to accelerate heat dissipation.
6. If the bag melts, the sealing strip may be overheated. Allow the appliance to cool for 60 seconds before using it again.
7. For the best preservation, do not reuse the bags after storing raw meats, fish or greasy foods. Do not reuse the bags after simmering or microwaving.

IMPORTANT SAFETY NOTICE&TIPS

Please read the user manual carefully before using and follow the safety instructions.

1. Check if the Voltage indicated on the appliance is corresponding to the local mains voltage before you connect the appliance.
2. Do not operate the appliance with a damaged power cord or plug. Do not operate the appliance if it malfunctions or is in any way damaged. If the cord or the appliance is damaged, it must be returned to an authorized service center for repairing.
3. To disconnect, unplug the power cord from the electrical outlet. Do not disconnect by pulling on cord.
4. Do not use an extension cord with the appliance.
5. If the supply cord is damaged, contact the manufacturer, or its service agent or similarly qualified person to buy it in order to avoid a hazard.
6. When it is not in use or to be cleaned, unplug cord from the power outlet.
7. Do not use the appliance on wet or hot surfaces, or near heat source.
8. Do not immerse any part of the appliance, power cord or plug in water or other liquids.
9. A short power cord is provided to reduce the risks of becoming entangled in a long cord or tripping over.
10. Use accessories or attachments recommended by the manufacturer only.
11. Use the appliance for its intended use only. Household use only.
12. Closely supervise children when using any electrical appliance. Do not allow the appliance to be used as a toy.
13. CAUTION: HOT SURFACE. DO NOT TOUCH.
14. Wait for 60 seconds before using it again.
15. To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other). This plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet at the beginning, reserve the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
16. The liquid in the vacuum chamber should not overflow to the heating wire, which is easy to short circuit and damage the heating wire. It should be cleaned in time.

HELPFUL HINTS

1. Do not overfill the bag. Always leave at least 6-8cm between bag contents and top of the bag.
2. Make sure the bag is dry. It will be difficult to make a tight seal if the bag is wet.
3. For best results, perishables still need to be frozen or refrigerated after vacuum sealing process.
4. Clean the opening end of the bag inside and outside. Flattern the bag opening.
5. When vacuum packaging a large item, to prevent wrinkles in the seal, gently stretch bag flat before placing it into the vacuum chamber.
6. When you are vacuum sealing items with sharp edges (such as dry spaghetti, silverware, etc.), protect the bag from punctures by wrapping the item in soft cushioning material, such as a paper towel. You may use a canister instead of a bag.
7. When using canisters, always leave 2.5 cm / 1 in of space at the top of canister.
8. Allow the appliance to cool for 1 minute between uses to avoid activating overheating protection.
9. If you are not sure whether your bag was sealed properly,simply reseal the bag.
10. For best results, use bags and canisters produced by the manufacturer.
11. Microwave: Don’t heat sealed food in microwave.

CLEANING AND MAINTENANCE

1. Unplug the appliance before cleaning.
2. Do not immerse the appliance in water or other liquids. Prevent water or other liquids from entering the AC power port on the appliance.
3. Do not clean the appliance with abrasive cleaning agent to avoid damaging the surface.
4. Wipe the outer surface with a soft soapy cloth.
5. Wipe away any food or liquid on the vacuum chamber with paper towel.
6. Dry the appliance thoroughly before using it again.

NTC Thermistor-temperature sensor:
Smartly monitor the temperature of the appliance. Protection mode will be activated automatically when overheat , with lights flash and operation unavailable. The appliance is back to normal working once cooled and the lights stop flashing.

STORAGE GUIDE

PACKAGE CONTENTS

TECHNICAL SPECIFICATION

• Item Number VS6612X / VS6611X
• Rated Voltage
  • AC100-120V
  • AC220-240V
• Rated Frequency 50Hz – 60Hz
• Rated Power 110W
• Sealing time 6-12 seconds
• Vacuum Level
  • -60kPa
  • 80kPa
• Dimensions 38210462MM (LWH)
• Net weight 0.95 kg
• Gross weight 1.33 kg

DISPOSAL

• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available.
• If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>