Econoboard Insulation Coated Insulation Boards Installation Guide
- June 11, 2024
- Econoboard
Table of Contents
Econoboard Insulation Coated Insulation Boards
Econoboard Coated Installation
Econoboard Coated Insulation Boards have an extruded polystyrene core with a fibre reinforced cement coating on both sides. These boards are designed for use on a timber substrate where they provide lateral stability.
Installation steps
- Measure your floor space and calculate how many boards you will need using the simple formula below
- Cut the boards to size to suit your room layout. Econoboard coated can be cut very easily using a sharp blade or wood saw. Please take appropriate care when using sharp tools
- Ensure your substrate is secure, clean and free from dust and loose particles. Set out your cut boards onto the area in an offset brick pattern. Fix in position using fixing screws (6020) and washers (6016) at 300mm centres (10 washers per board)
Pro tip
Allow approximately 10 mechanical fixings per board, fixing in the middle of
the board as well as round the perimeter. This will maximise the strength and
lateral stability of the floor.
For a high-quality finish make sure all boards are flush, and tape over the
seams using Reinforcing Tape (6015)
THIS INSULATION IS FOR OVER SUBSTARTE APPLICATIONS AND I NOT DESIGNED TO COVER BUILDING REUGLATIONS
ENSURE THE SUBSTRATE IS STABLE AND CLEAN BEFORE INSTALLAING ECONOBOARD COATED
DO NOT LAY ON TOP OF UNDERFLOOR HEATING
MAKE SURE YOU DO NOT SCREW DOWN INTO WATER PIPES OR ELECTRICAL CABLES
TAKE CARE TO ENSURE ALL JOINS ARE FLUSH AS POSSIBLE, TAPING IF NECESSARY
Technical Specifications
| Board Size | 1.2 x 0.6 |
|---|---|
| Board Area | 0.72m2 |
| Thermal Conductivity | 0.033W/MK |
| Compressive Strength | 300 kpa |
| Water Absorption | 0.6% by vol. |
| STOCK CODE | THICKENESS (mm) |
(m2k/w)
---|---|---|---|---
6106| 6| 8| 5.76| 0.15
6110| 10| 6| 4.32| 0.27
STOCK CODE| DESCRIPTION| UNIT
---|---|---
6015| 100mm Reinforcing Tape 25m roll*| Ea
6016| Zinc Fixing Washer (35mm)| pk 100
6022| Fixing Washers (32mm) and Screws| pk 100
*allow 2m of tape per head
-
6015 Reinforcing Tape
-
6016 Zinc Fixing Washers
-
6022 Fixing Washers and Screws
Contact Us
1300 368 631 • sales@thermogroup.com.au
www.thermogroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>