maxwest MX-FIT21 Smart Fitness Watch User Manual

maxwest MX-FIT21 Smart Fitness Watch

maxwest MX-FIT21 Smart Fitness Watch

Watch client download

Scan the QR code to download and install the watching client or search for the ‘Da Fit” download installation.

http://app.crrepa.com/site/download-cn

Introduction to the whole machine

Note: Press and hold the power-on key to turn the watch on
The watch is charged and activated
Before you use the watch for the first time, you need to charge to activate the metal point attached to the back of the watch using the equipped magnetic suction charging cable, and at the other end of the charging cable, you can connect to the USB charging head or computer USB port.

Connect the watch
This watch dual Bluetooth call watch, if you want to use the watch properly need to connect two Bluetooth (APP”side Bluetooth and mobile phone end (audio) Bluetooth)
1. APP-end connection
(for data transfer: Open the APP and click ‘Binding Watch’ to find the watch you need to connect to. If more than one device is nearby, please filter according to the MAC address of the watch, the connection is successful as follows:

2: Mobile phone connection (for calls)

1. Turn on the audio switch of the watch: swipe down in the main interface of the watch, enter the control center, tap the audio switch icon, turn on the audio status as shown:

2. Go to the mobile Phone Bluetooth search page, search and connect the hand table, the connection is successful as shown:

After the watch is successfully bound, each time the client is opened in the future, the watch will automatically connect to the phone and the data can be synchronized by pulling down on the client data page.

Introduction to the call function

When your watch is connected to your phone, you can use your watch to dial- control your phone to make calls, or you can answer calls from your phone on your watch. You can also view your watch’s call history. When using the call function, you need to make sure that your watch is connected to your phone in a stable state.

Watch operating instructions

Introduction to the function of the watch

| Music control
While connected, the watch can control the phone music player.
---|---
| | |
---|---|---|---
Motion information The watch records and displays the number of steps you walk each day, the calories burned, and mileage information. More detailed analysis and data records can be viewed in the client.| Sleep Your watch can record and show the total length of your sleep last night and the length of your deep and light sleep. More detailed analysis and data records can be viewed by the client.| Heart rate The watch can record and display a heart rate of 24h throughout the day- Click on the heart rate interface to measure the current heart rate. More detailed analysis and data records can be viewed by the client.| Blood pressure Click on the blood pressure interface to measure the current blood pressure value. More detailed analysis and data records can be viewed by the client.
| | |
---|---|---|---
Blood oxygen Click on the oxygen interface to measure the current oxygen value. More detailed analysis and data records can be viewed by the client.| Weather information The weather page shows the current weather, air quality information, and tomorrow’s conditions. Weather information needs to be connected to the client before data can be obtained, and weather information cannot be updated if disconnected for a long time.| Exercise 8 sports modes to choose from, including walking, running, cycling, basketball, football, badminton, skipping rope, swimming. More detailed analysis and data records can be viewed by the client.| Message push The watch can receive notifications on the display phone, and you can set push items on and off in the client
| |
---|---|---
Camera control When the phone is connected, the watch can be used as a remote control for the phone’s camera. When you turn on the camera on your phone, you can trigger the phone’s camera door by tapping on the watch camera control page.| Other features Other functions of the watch include a stopwatch, alarm clock, timer, brightness adjustment, vibration switch, do not disturb mode, cinema mode, factory resumption, shutdown, about.| The dial switches Press and hold the dial page, go to the dial switch, cross left and right to switch the dial, click confirm. You can also choose to switch dials in the client

Precautions

1. do not use charging voltage greater than 5V, charging current greater than 2A adapter, charging time of 2-3 hours.
2. Do not charge with water stains.
3. this product is an electronic monitoring product, not as a medical reference, measurement data for reference only.

Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, inducing interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver,
• Connect the equipment into an outlet a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure lim.ts set forth for an uncontrolled environment.

DOWNLOAD RESOURCES

• maxwest MX-FIT21 Smart Fitness Watch [pdf] User Manual MXFIT21, 2ANIRMXFIT21, MX-FIT21 Smart Fitness Watch, Smart Fitness Watch, Fitness Watch, Watch
• Read more: https://manuals.plus/maxwest/mx-fit21-smart-fitness-watch-manual#ixzz7kSIc5vk0

FAQ’S

What is the battery capacity of the watch?

The battery capacity of the watch is 80mAh, and the standby time is about 24 hours, and the working time is about 6-8 hours.

Can I use it to make a phone call?

Yes, this watch supports Bluetooth 4.0, and can be connected to mobile phones to make calls.

What functions does it have?

This watch has pedometer, heart rate monitoring, sleep monitoring, sedentary reminder, alarm clock and so on.

How to connect with mobile phone?

Please search “Da Fit” in App Store or Google Play to download the APP. After downloading and installing it, open the APP on your phone, click “Binding Watch” to find the watch you need to connect to. If more than one device is nearby, please filter according to the MAC address of the watch, and then click “Connect” button. You can see that your watch has been successfully connected with your phone.

How do I charge it?

Please use a magnetic suction charging cable to charge your watch. The charging cable is equipped with a magnetic suction head at one end which can be connected with your watch by magnetic attraction; at another end there’s a USB connector which can be connected with your computer or USB charger adapter for charging purpose.

How do I connect my smartwatch to my phone?

Pairing an Android Wear smartwatch with an Android phone
Install the “Wear OS by Google Smartwatch” app on your phone, available on the Google Play Store. On your watch, turn on Bluetooth. Open the Wear OS app on your phone and follow the initial setup. Tap on “I agree”.

How do maxwest smart watches work?

Each model of modern watches has WI-FI, Bluetooth and GPS technologies. External or built-in sensors allow the collection of information that allows data to appear on the watch display. The smart watch is synchronized with the phone using a mobile application.

Can you text on a fitness watch?

Introduction. Your Fitbit Versa has the ability to receive and send messages from your Android devices. You’ll have to enable notifications and will only be able to send quick, customized replies called Quick Replies.

Is the health Smartwatch 2 waterproof?

Health Smartwatch 2 is compatible with any Android device (Android 4.4 and up) as well as iPhone (iOS 8.0 and up). Is It Waterproof… Health Smartwatch 2 is water resistant. That means that you don’t have to worry about splashes of water when you wash your hands or go out in the rain.

How accurate is blood pressure on a smartwatch?

Cut-off values of 135/85 mmHg were used for both the smartwatch and the ABPM measurements. For the detection of either systolic and/or diastolic hypertension, sensitivity was 83%, specificity was 41%, PPV was 54% and NPV was 75%.

Can smartwatch measure blood sugar?

People with prediabetes using Google-owned Fitbit wearable can track changes in blood sugar control, according to a new study. The findings point to tech companies’ idea of building diabetes technology into wearable products, The Verge reported.

Do smartwatches need Internet?

Most of the current iterations of smart watches aren’t wholly standalone devices, simply because they lack an Internet connection. So many of the watches are designed to link directly with other devices that do have Internet connectivity, namely your smartphone.

VIDEO

maxwest MX-FIT21 Smart Fitness Watch
www://maxwesttelecom.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>