maxwest GRAVITY6PS Smart Phone User Guide
- June 5, 2024
- maxwest
Table of Contents
Quick Start Guide
Welcome! This guide tells you how to quickly start using your mobile phone and
discover even more useful information.
Please read this manual before using your phone, and keep it safe in case you
need it at next time. Version: V1.0
Features and keys
1. Earpiece
2. Front camera
3. Volume button
4. Power button
5. Touch screen
6. Back button
7. Home button
8. Menu button| 9. Speaker
10. USB interface
11. Headset jack
12. Back camera
13. Back camera
14. Back flash
15. Fingerprint lock
16. MIC
---|---
Task button: Click the task button to open all the apps running in the
background, you can freely switch to the app you want to use.
Power button: Press and hold this button to turn on /off your phone or perform
other operations. Press one time to lock the screen (except on certain
interfaces). While it is locked, you can still be able to answer incoming
phone calls.
Home button: When an application is running, press the Home button to keep the
application running in the background.
Power button+Volume button(-): Simultaneously press both buttons to take a
screenshot. Continuously click the power button three times, it automatically
connects to an emergency number.
Standard Accessories
Cell phone x1,
Charger x1,
Earphone x1,
USB cable x 1,
Quick start guide x 1,
Protective case x 1.
Technical Specifications
| Performance indicators | Parameters |
|---|---|
| Product name | Mobile phone |
| Ambient operating environment | -5’C-45°C |
| Camera | Front: 8 megapixels |
Back: 13 megapixels
Battery| 3300 mAh
Outline dimension| 155.573.48.95mm
Main screen parameters| 15.4 cm(6.1″ IPS)
Warning
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet and a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
-
SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output.
-
Before a new device is available for sale to the public. it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, Tests for each device are performed in positions and locations as required by the FCC/ISEDC.
-
For body-worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1 cm from the body.
-
Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.