maxwest MX-BUDS True Wireless Earbuds User Manual

maxwest MX-BUDS True Wireless Earbuds

Real wireless connection, realizing wireless stereo, left and right channel separation, HIFI sound effects, left and right ears have complete Bluetooth function, can be used alone or in pairs, master-slave switching, headset back connection away from the warehouse.

Charging compartment definition and headset parameters

Charging case Output

voltage

| DC 3.3-4.2V
Input Voltage| DC 5V/0.5A
Pop-up window range (only for IOS system)| 10CM
Bluetooth range| ≥10meter
Support Sytem| IOS , Android , windows
Bluetooth frequency| 2.4GHZ-2.4835GHZ ISM

Band

Description of headset indicator and charging compartment light

phone)

The main ear, red and blue flash quickly;

The accessory ear blue light

flashes once every 5 seconds

Headphone pairing status, disconnect| Headphone pairing status ，the

light flash means disconnect

Headphone off| Flashing red 3 times
Headphone other mode light (DUT)| Blue light
---|---
Headphone low

battery

| Red light flashes 3 times in 5

seconds, indicating low battery

Headphone charging status| The red light is always on, the green light in the charging compartment is always on, and

the red light is off when it is full

Charging in the charging compartment| The green light flashes gradually, and the green light is always on when it is full

Headphone overview

Simple instructions

1. Headphone on/off:

2. Turn on: Take out the headset from the charging compartment, the headset will automatically turn on:
   Or press and hold the touch points on both sides for 2 seconds to turn on, and the prompt sound “Power on”;

3. Shut down: Put it directly into the charging compartment to shut down; or press and hold the touch point for 5 seconds to shut down, the prompt sound “Power off”. When the headset is turned on and not connected to the mobile phone, it will automatically turn off in 3 minutes.

4. Matching:

5. Automatically pair after power-on, and the blue and red lights flash in single ears after successful pairing.
   (Note: If there is no pairing, the red and blue lights on both ears flash alternately, and the headset is not turned on.
   When the phone is connected, double-click the left or right ear, and the blue light flashes slowly in any ears after the pairing is successful. )

6. IOS&Android system connection headset:
   Open the phone “settings”-open the Bluetooth search-find the “MX-BUDS” pairing name and click to connect-the “connected” binaural light goes out. When the phone is connected once, use the first point of operation again, and the headset will automatically connect with the phone。

Function definition description

Function definition under call

Call answer：| Click on any earphone while

touching the area 1, the English report number of the call

---|---
hang up the phone| Click any side touch area 1 time
Call rejection| Long press on either side of the touch area for 2 seconds
Cancel dial| Click any side touch area 1 time
Increase and decrease volume| Double click left ear volume to decrease, double click right ear to increase volume
Switch between headset and

mobile phone

| Long press on either side of the touch area for 2 seconds

Function definition in music state

three times on

the right ear switch to the next song

Increase and decrease volume| Double click left ear volume to decrease, double click right ear to increase volume

voice assistant

phone comes with the Android system) long press for 2 seconds, the

timeout will shut down

Other definitions

Reset| Headphone is dead or blue light

status, long press any 8 seconds to turn on

---|---
Headphone over

distance and back connection

| Binaural over-distance and back-to-back beep

Precautions

1. Do not treat this product violently, or squeeze it with heavy objects, and stay away from high temperature and high humidity environments.
2. Stay away from WIFI, routers and other high-frequency transmitting devices, which will affect the signal reception of the unit, and cause sound jams and disconnections.
3. Please use this product in an effective environment (10 meters), and there should be no physical obstruction (such as walls, etc.) between the Bluetooth device and the headset.
4. If the product is not used for a long time, (within one month) charge the headset and base.

Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>