maxwest MX-BT3S BT Portable Speaker User Guide

maxwest MX-BT3S BT Portable Speaker

To ensure correct operation and avoid damage, please read this user manual carefully before using this product.

FEATURES:

1. Output very clear sound and dynamic sound effect
2. TWS function, pair two speakers together wirelessly to experience true stereo sound
3. With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such as your mobile phone, notebook, iPhone, or iPad
4. RGB lighting
5. Secure simple pairing for user-friendly operating
6. 10 meters operating range
7. USB support
8. FM radio
9. Line-in function, suitable for PC, MID, TV and other audio devices
10. Built-in lithium rechargeable battery 1500mAh
11. Carry Handle, easy to take out

SPECIFICATIONS:

• Bluetooth version: V5.0+BR+EDR
• Speaker Size: 3 inch
• Output: 8.5W, 4Ω
• Battery Capacity: 1500mAh
• Frequency Response: 120Hz-15kHz Playtime at max volume: 1.5H
• Product size: 278(L) 117W) 156(H) mm

ACCESSORIES:

Charging cable, Audio cable, User Manual

**PRODUCT DETAILS:

**

1. TWS button
2. Power On/Off
3. Forward/Volume Up
4. AUX IN
5. Charging Jack
6. USB Port
7. LED Indicator
8. Mode Button
9. Play/Pause Button
10. Backward/Volume down

Bluetooth:

1. Turn the power button to “ON”, the RGB light turn on automatically, the LED light turn blue and blink quickly, then enter Bluetooth mode and make a tone “Bluetooth Device Ready To Pair”.
2. Activate Bluetooth of mobile phone and search for device name “MX-BT3S” then connect it. The blue LED light blink slowly and make a tone “Bluetooth Device Connected Successfully” once connected.
3. Play the music from your mobile phone and enjoy.
4. Long press the Forward or Backward button on the device or operate on Mobile phones to select songs you like.
5. Press the Play/Pause button on the device or on Mobile phones to play/pause the music.
6. Short press the Forward or Backward button to adjust volume up and down. Or adjust the mobile phones’ volume.

Playing music from a USB disk:

1. Turn the Power button to “ON”, and the RGB light turn on automatically.
2. Insert USB flash disk into the slot, the speaker will make a tone “Music Play Mode”, and play the stored music automatically.
3. Under playing mode, long press the Forward or Backward button to select songs you like, short press to adjust the volume up and down.
4. Press Play/Pause to play or pause.
   Remark: Under Bluetooth playing mode, insert the USB disk will disconnect the Bluetooth and switch to play the USB disk. You can press the MODE button to switch to Bluetooth mode again.

FM Radio:

1. Under FM radio state, the audio cable provided is treated as an antenna. Please Insert the audio cable to get the best FM signal before using it.
2. Turn the power button to “ON”, press the “MODE” button, and the speaker will prompt “The Radio Mode” when entering the FM state.
3. Under playing mode, short press the “Play/Pause” button to mute the speaker, long-press the “Play/Pause” button to auto search the FM Channel and store it automatically.
4. Long-press Forward or Backward button to change the stored FM channel.

AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux-In” of this device to enjoy playing music. Under any playing mode, When you use the audio cable to connect the device, it will auto-switch to the AUX mode. Under AUX mode, all functions can be controlled by an external device.

Remarks:

1. When an audio cable is connected to the device, you can not switch to Bluetooth mode by pressing the Mode button.
2. When an audio cable is connected to the device, you can press the “TWS” button to make a TWS connection under AUX mode.

TWS Function:

1. Turn on two identical speakers you want to pair, both under BT mode. Only need to set up one of the two units.
2. Press the “TWS” button, the speaker will make a tone “di” to start pairing, and make “di” voice for 3 times once successfully paired.
3. Make a Bluetooth connection with your mobile phone to play music by the two paired Speakers to create a more powerful surround sound effect.
4. When you want to exit the TWS mode, press the “TWS” button again to exit the TWS function.
5. Once two units are paired with TWS, when they both are turned on next time within effective range, they can be automatically paired again(When two units TWS connected, if you manually operate to disconnect the TWS connection, next time when you turn on the two units, they will not automatically be paired again). Remark: Under Bluetooth TWS mode, if you connect your mobile phone to the unit (you operated“TWS” button at beginning) via an audio cable, it will start to play AUX via the TWS function.

Remarks:

1. To turn the RGB light on/off, please long press the Mode button.
2. When the speaker Bluetooth is connected to one mobile device, the user can long-press the TWS button to disconnect the previous device, then make a Bluetooth connection with another mobile device.
3. The default volume is at 50% status of max volume.
4. When the battery voltage is low, the speaker will prompt “Battery Is Low, Please Recharge In Time”.

How to charge:

1. The charger is not included in the accessories. Please use a standard 5V/1~2A charger to charge this device, and we are not responsible for any damage caused by using another charger.
2. Power off the unit put the provided charge cable into the charging slot of the unit, and connect the other end to the PC or another charger with 5V output.
3. Charge time should be 2-4 hours. The light is red while charging, and the indicator light will switch off when fully charged.
4. In order to prolong the life of the battery, please do not charge for more than 8 hours.
5. The unit does not have power bank function, it is forbidden to charge another device via this unit or to connect another device via a USB cable.

IMPORTANT:
When playing music during charging, please put the volume to the middle, because for some music with heavy bass, the charger may not be able to afford the high current temporarily under the maximum volume.

FCC STATEMENT WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>