muRata 2AY Communication Module User Manual
- June 6, 2024
- muRata
Table of Contents
2AY User Manual for FCC
Model Name: 2AY
FCC ID: VPYLBCA2HN2AY
Since this module is not sold to general end-users directly, there is no user
manual of the module. For the details about this module, please refer to the
specification sheet of the module. This module should be installed in the host
device according to the interface specification (installation procedure)
The OEM integrator has to be aware not to provide information to the end-user
regarding how to install or remove this RF module in the end user’s manual of
the end product which integrates this module. The end-user manual shall
include all required regulatory information/warning as shown in the User
manual.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC CAUTION Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Part 15 Subpart C
Since there is no space that indicates FCC ID on this module, FCC ID is
indicated in a manual. If the FCC ID is not visible when the module is
installed inside another device, then the module is installed must also
display a label referring to the enclosed module.
The modular transmitter is only FCC authorized for the specific rule parts
(i.e., FCC transmitter rules) listed on the grant, and the host product
manufacturer is responsible for compliance to any other FCC rules that apply
to the host not covered by the modular transmitter grant of certification.
The final host product still requires Part 15 Subpart B compliance testing
with the modular transmitter installed.
- Antenna list.
Part number| Vendor| Peak Gain(dBi)| Type| Connector
---|---|---|---|---
Internal Trace Antenna| Murata| +0.5| Monopole| – - The following information must be indicated on the host device of this module.
Contains Transmitter Module FCC ID: VPYLBCA2HN2AY
or
Contains FCC ID: VPYLBCA2HN2AY
FCC Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size,
please describe it in the user’s manual and also either describe it on the
device packaging or on a removable label attached to the device.
- The following statements must be described on the user manual of the host device of this module;
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines as this equipment has very low levels of RFenergy. ［※］
※But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person’s body.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 June 2021
Documents / Resources
|
muRata 2AY Communication
Module
[pdf] User Manual
LBCA2HN2AY, VPYLBCA2HN2AY, 2AY, Communication Module
---|---