Lifeguard Press WCPRD Wireless Charging Pad Instructions

June 6, 2024
Lifeguard Press

Lifeguard Press WCPRD Wireless Charging Pad
Instructions

SIMPLE WIRLESS CHARGER

SPECIFICATIONS

Manufacturer Lifeguard Press, Inc
Address 134 Beech Bend Rd. Bowling Green, KY 42101
Input DC 5V/2A, 9V/1.67A
Output 5W/7.5W/10W
Quick charge  QC3.0
 Conversion ≥730/0
Material ABS. Alufer

NOTE

  1. PLEASE DO NOT DISASSEMBLE THIS PRODUCT.
  2. PLEASE DO NOT USE THIS PRODUCT IN HIGH TEMPERATURES OR DAMP ENVIRONMENTS.
  3. THE CHARGING SURFACE CANNOT CARRY METAL MATERIALS SUCH AS IRON SHEETS, METAL PROTECTIVE SHELLS, ETC.

PACKAGING LIST
SIMPLE WIRELESS CHARGER1
MICRO USB CABLE(1M)
1
USER MANUAL*1

HOW TO USE THIS WIRELESS CHARGER

  1. CONNECT THE MICRO USB CABLE INTO THE CHARGING PORT.
  2. PLUG THE USB CONNECTOR INTO THE QC3.0 POWER ADAPTER.
  3. CONNECT THE POWER ADAPTER TO A POWER OUTLET.
  4. PLACE THE WIRELESS CHARGING DEVICE IN THE CENTER OF THE CHARGING AREA TO START CHARGING.

LED INDICATORS INFORMATION

  1. POWER ON: BLUE LIGHT AND GREEN LIGHT FLASH ONCE
  2. STANDBY MODE: GREENLIGHT FLASHES FOR 20 SECONDS
  3. CHARGING: BLUE LIGHT
  4. CHARGING ERROR: BLUE LIGHT AND GREEN LIGHT FLASHING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Made in china

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals