hama 00223581 Radio Controlled Power Outlet Set Instruction Manual

Radio Controlled Power Outlet Set
Operating Instructions
00
223581

Operating instruction

Thank you for choosing this Hama product!
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for futurereference.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

• 2xradio-controlled sockets 433 MHz
• 1xremotecontrol
• 1xCR2032 battery
• These operating instructions3. Safety instructions
• The product is intended for private, noncommercial use only.
• Use the product only for the intended purpose.
• Protect the product from dirt, moistureand overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity of heaters, other heat sources, or in direct sunlight.
• Donot use the product in areas in which electronic products are not permitted.
• Donot drop the product and do not expose it to any major shocks.
• Donot modify the product in any way. Doing so voids the warranty.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Donot operate the product outside the power limits specified in the technical data.
• As with all electrical products, this device should be kept out of the reach of children.
• Only use the article under moderate climatic conditions.
• The product is intended only for use inside buildings.
• Donot use the product in a damp environment and avoid splashing water.
• Never connect multiple units of this product in a series.
• The product must only be operated on a supply network as described on the type plate.
• Donot place the product near interference fields, metal frames, computers, TVs, etc. Electronic devices and window frames can negatively affect the functionality of the product
• Donot use this product with any devices that are motorized or any devices that have a rotating component or workpiece. There is a risk of injury.

Warning -Batteries

• When inserting batteries, note the correct polarity (+ and -markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Before you insert the batteries, clean the battery contacts and the polarity contacts.
• Donot allow children to change batteries without supervision.
• Donot mix old and new batteries, or batteries of different types or from different manufacturers.
• Remove the batteries from products that aren’t being used for an extended period (unless these are being kept ready for an emergency).
• Donot short-circuits batteries.
• Donot charge batteries.
• Donot burn batteries.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
• Remove spent batteries from the product and dispose of them without delay.
• Avoid storing, charging, and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).

Warning -Button cells

• Donot swallow the battery. Burning hazard from hazardous substances.
• This product contains button cells. If the button cell is swallowed, serious internal burns can occur within 2hours and ultimately lead to death.
• Keep new and used batteries out of the reach of children.
• If the battery compartment will no longer close securely, stop using the product and keep it away from children.
• If you suspect that batteries have been swallowed or are in any part of the body, seek medical attention immediately.

Risk of electric shock

• Donot open the device or continue to operate it if it becomes damaged.
• Donot use the product if the AC adapter, the adapter cable, or the mains cable are damaged.
• Donot attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Connection and commissioning

Warning

• Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.

Please connect the radio-controlled socket to a conventional earthed socket.
To test the function and for manual operation without remote control, press the “On/Off” button. When the button is pressed, the LED on the radio- controlled socket should light up and go out again when the button is pressed again.

Note
Please note that the maximum transmission range can only be achieved in optimized conditions. The range may be reduced by walls or other radio signals (mobile phone, WLAN, etc.), for example.

Learning function of the radio-controlled socket

Press and hold the “LEARN” button for approx. 3 seconds until the LED flashes. Now,onthe remote control, select the required channel by pressing the corresponding “ON” button. The LED on the radio-controlled socket stops flashing as soon as the teaching process is successfully completed.
If teaching fails, the radio-controlled socket will exit learning mode after 15 seconds. In this case, repeat the process. Multiple learning (where multiple radio-controlled sockets respond to the same channel on the remote control) is possible.
If you would like to delete the programmed channel again, first press the “LEARN” button until the LED flashes. Pressing the corresponding “OFF” button on the remote control deletes the programming.

Troubleshooting

The remote control does not work

Please check that the battery has been inserted with the correct polarity. The lettering on the battery and the polarity indicator in the battery compartment can be used to check this.
If the pilot LED on the remote control does not light up when a button is pressed despite the battery being inserted correctly, this is most likely due to a technical fault on the remote control. In this case, please contact our technical customer service team or the retailer from which you purchased this product.

The radio-controlled socket cannot be switched on or off despite the remote control working correctly

Please repeat the steps under “Learning function of the radio-controlled socket”, and if necessary contact the technical support team at Hama or the retailer from which you purchased this product.

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

• Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
• Ensure that no water is able to enter the product.

Warranty disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.

Technical data

Declaration of conformity

Hama GmbH &CoKGhereby declares that the radio equipment type [00223581] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
www.hama.com -> 00223581 -> Downloads.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0

Al listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>