adidas ZNE 01 ANC TWS earbuds User Manual

adidas ZNE 01 ANC TWS earbuds

GETTING STARTED

• Open the charging case.
• Press and hold the logo on the front of the case until the LED turns to a slow blue pulse.
• Select adidas Z.N.E. 01 ANC from your sound device’s Bluetooth® list.

TOUCH CONTROLS

Touch the left or right earbud to control your music, phone calls and more. The long touch behaviour can be customised in the app.

1. touch to play/pause or receive/end a call
2. touches to skip forward or reject a call
3. touches to skip backward
4. Long touch to toggle noise cancelling, Awareness and ANC off

CHARGING THE EARBUDS
Put your earbuds back in the case and close the lid to turn them off and begin charging.

CHARGING THE CASE

Use a wireless charger or plug the case into a USB power source to charge it. The case is fully charged when the frontfacing LED is steady green. To charge the case using a wireless charger, follow the instruction below.

1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned steady green the case is fully charged.

LED INDICATOR
The LED shows the case battery charge, from red through yellow to green (0–100%). It pulses blue while in Bluetooth pairing mode.

PAIRING A NEW DEVICE
adidas Z.N.E. 01 ANC remembers up to 3 previously paired devices and will try to reconnect with the last connected device.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the logo on the front of the case until the LED turns to a slow blue pulse.
3. Select adidas Z.N.E. 01 ANC from your sound device’s Bluetooth list.
   Note : The earbuds can be connected with one sound device at a time. Make sure to disconnect from the current device before reconnecting with a different device.

FITTING THE EARTIPS
Take the time to find the eartips that best fit your ear. The eartips should fit snugly in your ear but still feel comfortable. It is not uncommon to use different sizes for left and right earbuds.

NOISE CONTROL
Long touch either left or right earbud to cycle through the noise control modes.

• Active Noise Cancelling mode – blocks out distractions, so you stay focused on completing that final set
• Awareness mode – allows you to hear more of the outside world, ideal for long runs in the city
• Off – noise control is turned off. The amount of noise cancelling and Awareness can be adjusted in the adidas Headphones app.

RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, follow the instructions below.

1. Place the earbuds in the case and close the lid to restart the earbuds. If the problem persists, perform a hardware reset:
2. Place the earbuds in the case and keep the lid open.
   Press and hold the touch surface on both earbuds for 4 seconds to reset the earbuds. If the problem persists, perform a factory reset.

Note : This will delete all user settings and the earbuds will need to be set up again.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the button on the case for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
3. Remove adidas Z.N.E. 01 ANC from your sound device’s Bluetooth list before pairing again.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>