adidas Z.N.E-01 ANC True Wireless Earbuds User Manual

Z.N.E-01 ANC True Wireless Earbuds
**User Manual

**

Z.N.E-01 ANC True Wireless Earbuds

GETTING STARTED

• Open the charging case.
• Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
• Select Adidas Z.N.E. 01 from your sound device’s Bluetooth® list.

TOUCH CONTROLS

Touch the left or right earbud to control audio and phone calls.

1. touch to play/pause or receive/end a call
2. touches to skip forward or reject a call
3. touches to skip backward

CHARGING THE EARBUDS

Put your earbuds back in the case and close the lid to turn them off and begin charging.

CHARGING THE CASE

Use a wireless charger or plug the case into a USB power source to charge it. The case is fully charged when the front-facing LED is steady green. To charge the case using a wireless charger, follow the instruction below.

1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned steady green the case is fully charged.

LED INDICATOR

The LED shows the case battery charge, from red through yellow to green (0­100%). It pulses blue while in Bluetooth pairing mode.

PAIRING A NEW DEVICE

adidas Z.N.E. 01 remembers up to 6 previously paired devices and will try to reconnect if not connected, starting with the last connected device.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse. 3. Select Adidas Z.N.E. 01 from your sound device’s Bluetooth list.

Note: The earbuds can be connected with one sound device at a time. Make sure to disconnect from the current device before reconnecting with a different device.

ADJUSTING THE EARBUD FIT

The earbud’s silicone sleeve can be removed for a looser fit. To reattach the sleeve, simply pull the silicone sleeve over the earbud. Note: Make sure the holes in the sleeve are aligned with the sensors and ports on the earbud.

RESETTING THE EARBUDS

If your earbuds become erratic or unresponsive, follow the instructions below.

1.  Place the earbuds in the case and close the lid to restart the earbuds. If the problem persists, perform a factory reset.

Note: This will delete all user settings and the earbuds will need to be paired again.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
3. Remove of Adidas Z.N.E. 01 from your sound device’s Bluetooth list before pairing again. If the problem persists, perform a hardware reset.

Note: This will delete all user settings and the earbuds will need to be paired again.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 15 seconds to reset the earbuds.
3. Remove Adidas Z.N.E. 01 from your sound device’s Bluetooth list before pairing again.

© All rights reserved. adidas, the Badge of Sport, and the 3-Stripes mark are registered trademarks of Adidas used by Zound Industries International AB under license from Adidas AG.
The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries International AB is under license.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>