Shenzhen Amediatech Technology X96X4 Amlogic TV Box User Manual
- June 6, 2024
- Shenzhen Amediatech Technology
Table of Contents
User Manual
Package Contents
Connection Diagram
Installation Steps
- Connect the TV Box with the power supply.
- Connect the TV Box to your TV with an HDMI cable or AV cable.
- For a wired connection, plug in an Ethernet cable from the TV Box to your modem or router. For wireless, choose your Wi-Fi network and
Multi-Sereen Interaction
The Screen Casting
Introduction:
The TV Box lets you play photos, music, and videos from your smartphone or
tablet computer on your TV.
Preparation:
Make sure your device(s) and TV Box is connected to the same network.
How to use:
After your device(s) and TV Box are connected to the same network, the logo
will show up in the related applications of your device(s). Click tuer and
share the photos, music, and videos on TV.
Key Features
Amlogic S905X4 64-bit Quad-Core ARM0 Cortex” A55 CPU@G31″ MP2 GPU processor.
8K video decoding 10-bit HEVC and AVS+codec support, H.265 HEVC MP-10©L5.1 up
to 8Kx4K@24fps.
RAM 2GB:100M Ethernet,802.11b/g/n 2.4G WiFi. RAM 4GB:100/1000M
Ethernet,802.11b/g/n/ac 2.4G and 5G WiFi. Support BT.
Android OS, OTA upgrade support.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.