Sricam SH007 Smart Tracking Phone Holder User Manual

June 6, 2024
Sricam

Sricam SH007 Smart Tracking Phone Holder User Manual

Sricam SH007 Smart Tracking Phone Holder User Manual

Product Introduction:

Sricam SH007 Smart Tracking Phone Holder - Product
Introduction

Button Introduction

  1. OFF/ON : Power switch key ①Turn the switch power to the left to turn off, and turn to the right to turn on; ②In the power-on state, the green indicator light is on and flashes once every 1 second. At this time, the machine defaults to follow-up mode

  2. MODE : Support four modes (follow shooting mode, left and right 90° cruise, 180° cruise, 360° cruise)
    The default mode is the follow-up mode when starting up. Each time you press the MODE button, the mode changes as follows:
    Sricam SH007 Smart Tracking Phone Holder - MODE Support four modes follow
shooting mode

  3. SPEED : It can be used in automatic rotation mode, but the speed cannot be adjusted manually in follow mode.
    (The speed is divided into 5 gears) Each time you press the SPEED key, the speed mode changes as follows:
    Sricam SH007 Smart Tracking Phone Holder - SPEED It can be used in automatic
rotation mode

  4. USB charging port : Charging voltage is 5V

Battery installation:

  1. Install two 18650 lithium batteries as shown below (This product needs to be installed with batteries)

Sricam SH007 Smart Tracking Phone Holder - Battery
installation

Install Phone:

Sricam SH007 Smart Tracking Phone Holder - Install
Phone

Diagram of fill light installation:

Note: This product does not include fill light and tripod.

Sricam SH007 Smart Tracking Phone Holder - Diagram of fill light
installation

Be careful to keep the lenses in the same direction:

When using tracking phone holder, please try to keep the tracking holder lens and the phone lens in the same direction. At the same time, be careful to keep the person at the right distance from the tracking holder, keeping the person’s upper body inside the lens as much as possible to ensure better use of the tracking phone holder.

Sricam SH007 Smart Tracking Phone Holder - Be careful to keep the lenses in
the same direction

Tracking holder usage steps:

  1. Install 2 x 18650 lithium batteries(Need to be purchased separately), turn switch to ON button, green light on for operating mode.
  2. Fix your phone with the bracket, adjust the bracket to hold the phone in place and ensure that phone does not fall out, and adjust the angle of the phone holder to a suitable position.
  3. Open your live streaming software, keep the distance within 0.5 to 3 meters. It can be tracked with the body.
  4. It can also be used for following up lighting, Water Spray Mist Fan, product display, etc. For more information on how to use it, please refer to the product details.

Notes:

  1. Batteries must be of the same brand and the same capacity. Mixing old and new batteries is prohibited.
  2. When install the phone holder, please note that the orientation of the holder should be the same as the orientation of the camera.
  3. When using batteries or mobile power, do not place the device in a hot or humid environment.
  4. Do not move quickly during operation, otherwise the AI camera may lose the target.
  5. Please use 5V power supply, No charging cable can be used during use.

Shenzhen SriCCTV Technology Co.,LTD.

Add: The 4th Floor of building 40,5th Industrial Park of Huaide Cuigang,
Fuyong Street,Bao’an,Shenzhen,China.
Website: www.sricam.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Sricam User Manuals

Related Manuals