Sricam NVS003 16-Channel Network Video Recorder User Manual
- June 6, 2024
- Sricam
Table of Contents
16-Channel
Network Video Recorder
NVS003
USER MANUAL
Product Introduction
Front Panel
Rear Panel
SN
| Icon|
Function
---|---|---
1| POWER| For Power Supply.
2| VGA| Outputs analog video signal. This connects to the monitor to view
analog video.
3| HDMI| High definition audio and video signal output port. It transmits
uncompressed high-definition video and multiple channel data to the HDMI port
of the display device.
4| USB| USB2.0 port. Connect a mouse, USB storage device, USB burner, etc.
5| LAN| 10M/100Mbps self-adaptive Ethernet port. Connects to the network. Such
as Router Switch etc
Hard Drive Installation
Install your hard drive, the following is needed:
- A medium-sized (regular) Phillips-head screwdriver – not included.
- Four hard drive fastening screws – included.
- A hard drive – not included.
1. Loosen the screws on the upper cover and side panel.
2. Place the HDD in accordance with the four holes on the bottom of the casing.
3. Tighten the HDD screws firmly to the bottom of the NVR.
4. Place the cover back onto the NVR, Secure the screws on the rear and side panels.
Note: Disconnect the NVR power before installing the hard disk, Hard disk maximum support 8TB.
NVR Connection
- Connect the Mouse to the USB port.
- Connect a Monitor or TV screen to your NVR via HDMI or VGA cabl
- Connect the Router or Switch to NVR with an Ethernet cable.
- Connect the NVR to power 12V.
- Connect the camera to the Switch or Router.
Connection as followings
Note:
For non-PoE cameras: Connect the power adapter to the power port attached
to the camera.
For PoE cameras: Connect the PoE camera to a PoE-compatible router or
switch that is on the same network as the NVR. PoE cameras can either be
powered with a PoE connection or with a standard power adapter (sold
separately).
Note: This NVR Supports:
Video-Input: 16CH 5MP Recording or 8CH of 8MP Recording.
Video Output: HDMI (4K) & VGA (1080P).
NVR Login
Complete login settings according to the NVR boot wizard. (the default password for the NVR is: 888888)
Network Setting
When the network shows an abnormal state, double-click to open the network settings-check whether the video recorder IP address is the same as the router, if not in the same network segment, can be set automatic acquisition IP or manually change it to be consistent as the router segment.
Add the Camera
Right Click the Screen-Camera–Search — Add — OK
SriHome APP Setup
Step 1. SriHome App Installation
Method 1: Scan the QR code to download “The crime” App.
Method 2: Search“SriHome” on Google Play or iOS App Store.
https://play.google.com/store/apps/details?id=com.x.srihome
Android
https://itunes.apple.com/us/app/srihome/id1327653710
iOS
Step 2. Register & Login on SriHome App
Step 3. Add the Device to App
Note: A. The ID of the device is stuck on the label of the video recorder shellB. Enter Desktop /Main Menu–My Device–Version- Serial NO.
Reset
Enter Desktop>Control Panel>Restore>Please select setting entries that you want to default.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>