EXPLORE SCIENTIFIC RDP1002 Radio Controlled Alarm Clock Instruction Manual

: June 6, 2024
: EXPLORE SCIENTIFIC

Table of Contents

GENERAL WARNINGS
PRODUCT OVERVIEW
SET THE CLOCK MANUALLY
OPERATION
SPECIFICATIONS
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

RADIO-CONTROLLED
Art.No.: RDP1002
INSTRUCTION MANUAL

ABOUT THIS INSTRUCTION MANUAL
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/ user of the product. The device is intended only for indoor use.

GENERAL WARNINGS

Risk of electric shock — This device contains electronic components that operate via a power source (power supply and/or batteries). Children should only use the device under adult supervision. Only use the device as described in the manual; otherwise, you run the risk of an electric shock.
Choking hazard — Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.
Risk of chemical burn — Keep batteries out of the reach of children! Make sure you insert the batteries correctly. Leaking battery acid can lead to chemical burns. Avoid contact of battery acid with skin, eyes, and mucous membranes. In the event of contact, rinse the affected region immediately with plenty of water and seek medical attention.
Risk of fire/explosion — Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion.
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.

SCOPE OF DELIVERY Alarm clock, Power adapter, Operating instructions, 2x AAA batteries.
BEFORE YOU BEGIN

We recommend using alkaline batteries. If temperatures regularly fall below 0°C (32°F), we recommend IT using lithium batteries.
Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power require- FR ments.
Insert batteries before first use, matching the polarity in the battery compartment. 2x AAA Batteries are required.

PRODUCT OVERVIEW

Press [ ] to activate the snooze function, backlight, and projection. Press and hold to toggle projection on/off.
Projection lens.
In date mode, press [ ] to turn on/off zone. In alarm time mode, press to turn on/off the alarm. Press and hold to enter the time and date setting.
Press [ ] to show alarm time of Alarm 1-5 and Alarm 6-7. Press and hold to enter the alarm setting.
Press [ ] to switch between temperature, second and weekday display. Press and hold to start RCC signal receiving. In setting mode, press to increase one unit, press and hold to increase rapidly. Radio-controlled clock function not available in every territory 4
Press [ ] to switch between date mode and the nearest coming alarm time. In projection, press and hold to flip the projection display in 180°. In setting mode, press to decrease one unit, press and hold to decrease rapidly.
Power jack.
Battery compartment. Slide down to open.
USB charging port.(To charge USB devices).

LCD DISPLAY
1. Time display
2. Date display or Alarm time display(Press [ ] to switch)
3. Temperature display or weekday display
(Press [ ] to switch)
[ ] RCC signal received
[ ] Alarm ON
[ DST ] DST ON (Daylight Saving Time)
[ ] Snooze activated
[ ] Low battery indicator
[ ] Temperature mode

GETTING STARTED

INSERT BATTERIES

Remove the battery door from the back.
Insert 2x AAA (LR03)/1.5V batteries. Please ensure the polarities (+/-) of the batteries match upon installation.
Reattach the battery door.

NOTE: Replace batteries when [ ] displays, or when the display is dim.
DC POWER ADAPTER
Only use a compatible DC Power adapter (5V 1000mA). Plug the power cable to the power jack and the power adapter to a suitable power outlet.
NOTE: We recommend inserting batteries as a backup power source.
CLOCK RECEPTION

Replace batteries or press [ ] button will initiate RCC receiving.
RCC receiving can work in both date mode and alarm FR mode.
The receiving process duration is 10 minutes.
During receiving process, the RCC signal symbol [ ] flashes.
If the RCC receiving process is successful, a completed RCC symbol [ ] will be shown in the display and the date and time will be set automatically. If it fails within 10 minutes, the RCC setting will quit automatically. If that appens, press the [ ] button to re-initiate RCC receiving.
RCC receiving will automatically start at 1:00, 2:00, 3:00, 4:00, 5:00, or 6:00 every night. Auto receiving function will cease if it is successful.
To stop RCC reception, press the [ ] button.
If the device is still not receiving the signal, please proceed to set the time manually.

NOTE: When using a power adapter, please increase the separation of the main unit and the power adapter to avoid interference of RCC signal receiving.

SET THE CLOCK MANUALLY

Press and hold [ ] button to enter time and date settings.
The setting parameter will flash.
Press [ ] button once, the figure will increase 1 unit (when setting the minute, second will reset to 0). Press and hold the [ ] button, the figures will increase rapidly.
Press [ ] button once, the figure will decrease 1 unit (when setting the minute, second will reset to 0). Press and hold the [ ] button, the figures will decrease rapidly.
Press the [ ] button to confirm the setting and enter to next parameter.
The sequence of setting: Weekday Language 12/24 Hr Year (2000 2099) Date format Month Date Hour Minute Zone °C/°F Exit
If there is no action in 20 seconds, the setting will be saved and will exit the setting mode.

LANGUAGE
The sequence of setting weekday language:
German (GER) English (ENG) French (FRE) Italian (ITA) Dutch (DUT).

Symbol	ENG
Monday	MON
Tuesday	TUE
Wednesday	WED
Thursday	THU
Friday	FRI
Saturday	SAT
Sunday	SAT

TIME ZONE SETTING
To set a different time zone, proceed as follows:

Press and hold [ ] button, enter time and date setting.
Press [ ] button several times until the display shows the time offset “Zone 00”
Press the [ ] button to increase or [ ] button to decrease the Time zone offset.

°C/°F SETTING

Press and hold [ ] button, enter time and date setting.
Press [ ] button several times until the display shows °C/°F.
Press the [ ] or [ ] button to switch Celsius (°C) / Fahrenheit (°F).

ALARM SETTING/ADJUSTING DUAL ALARM TIME
You can set one alarm time for weekdays, (Monday to Friday / 1-5) and one alarm time for the weekend (Saturday to Sunday / 6-7). Alarm 1 = Weekday alarm (1-5) Alarm 2 = Weekend alarm (6-7)

Press and hold [ ] button, enter alarm setting. EN
Sequence of setting: Alarm 1 (1-5) weekday hour weekday minute Alarm 2 (6-7) weekend hour IT weekend minute exit
During setting, the setting parameter will flash.
Press [ ] button once to increase by 1 or pres once to decrease by 1. Alternatively, press ES and hold the [ ] button to change the figures rapidly.
Press the [ ] button to confirm the setting and enter to next parameter.
Press the [ ] button to turn on/off the alarm.
The alarm will sound when the alarm setting is finished and turned on.
If there is no action in 20 seconds, the setting will be saved and will exit the setting mode.

TURN ON/OFF ALARM

Press the [ ] button once to turn on/off the alarm that is nearest in time. (1-5) or (6-7) will flash to indicate which alarm was activated.
How to activate alarm times individually:
Press the [ ] button once to switch to alarm mode. Monday to Friday alarm time will be shown and (1-5) will flash.
Press [ ] button once to turn on/off Monday to Friday alarm.
Press [ ] button again to show Saturday to Sunday alarm time. (6-7) will flash.
Press [ ] once to turn on/off Saturday to Sunday alarm.

OPERATION

At the set time, the alarm signal rings.
During the alarm, press the [ ****] button to delay the alarm by 8 minutes.
If you do not press any button to stop the alarm, it will automatically turn off after 5 minutes.
To stop the alarm, press the [ ] or any other button.
The alarm will start again at the next alarm time unless you switch off the alarm function by pressing the [ ] button.

PROJECTION
The projector displays the time on your ceiling or wall and it can rotate 180°. It is easier to view in a darkened room. For the optimal projection results, place the unit within 1.5 – 2 m (5-6.5 ft) from the ceiling or wall.

Press the [ ] button to activate the backlight and projection for 5 seconds.
Press and hold [ ] button, flip the projection display 180°.
Press and hold [ ] button, toggle continues projection on in case of using an adapter power source and toggle projection on for 5 minutes in case of using batteries power only. Press and hold [ ] button again, turn off projection and toggle continues projection off.

NOTE: The projection is disabled during the RCC signal reception.

SPECIFICATIONS

Dimensions (Main unit): 129 x 26 x 70 mm (L x W x H)
Weight (Main unit): 125 g (Exclude batteries)
Temperature display range: -5 °C to +50 °C (23 °F to 122 °F)
Power: 2x AAA (LR03) 1.5V batteries Power adapter 5V
NOTE
When the temperature is lower than -5°C(23°F), the temperature displays LL.L. When the temperature is higher than 50°C(122°F), the temperature displays HH.H.
During alarm rings or the RCC receiving process, temperature detection will be stopped.
EC DECLARATION OF CONFORMITY
Hereby, Folux GmbH declares that the equipment type with part number: RDP1002 is in compliance with Directive: 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.Bresser/download/RDP1002/CE/RDP1002_CE.pdf
RCM DECLARATION OF CONFORMITY
The adapter complies with electrical safety, EMC, and radio spectrum regulatory requirements for products supplied to the Australian or New Zealand market.
NOTES ON CLEANING

Remove the batteries before cleaning.
Only use a dry cloth to clean the exterior of the device.
To avoid damaging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture.

DISPOSAL
Dispose of the packaging materials properly, according to their types, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per the Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive. Batteries that contain toxins are marked with a sign and a chemical symbol.
1 battery contains cadmium
2 battery contains mercury
3 battery contains lead

WARRANTY & SERVICE
The regular guarantee period is 5 years and begins on the day of purchase. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.explorescientific.com/warranty.
Would you like detailed instructions for this product in a particular language? Then visit our website via the link below (QR code) for available versions.
MANUAL DOWNLOAD:

https://cutt.ly/OngsHA6|
http://www.explorescientific.com/weather-clock-manuals
---|---

EU Version: https://cutt.ly/OngsHA6 US Version: www.explorescientific.com /weather-clock-manuals
SERVICE AND WARRANTY:

****www.explorescientific.com/warranty