JOY-IT COM-5WS 5-Way Navigation Switch User Manual

5-Way Navigation Switch
User Manual 

Navigation switch with 5 directions and two additional buttons

GENERAL INFORMATION

Dear Customer,
thank you for choosing our product. In the following, we will show you what to consider during commissioning and use.
Should you encounter any unexpected problems during use, please feel free to contact us.
BASICS & CONNECTION OF THE MODULE
The navigation switch has a total of 5 directions (left, right, up, down, press) and is equipped with two additional buttons. All contacts are closed via a common ground pin.  The module can be connected as follows:

RASPBERRY PI EXAMPLE

First, connect the module to your Raspberry Pi:

Now transfer the following code example to your Raspberry Pi:

Alternatively, you can download it using the following command: wget https ://joy-it.net/files/files/Produkte/COM-5WS/COM-5WS-RPi.zip unzip COM-5WS- RPi.zip
Now run the sample program with the following command: Sudo python3 COM- 5WS-RPi.zip

ARDUINO EXAMPLE

First, connect the module to your Arduino:

Now transfer the following code example to your Arduino. Alternatively, you can download it here.

INFORMATION & TAKE-BACK OBLIGATIONS

Our information and take-back obligations under the Electrical and Electronic Equipment Act (ElektroG)
The symbol on electrical and electronic equipment:
This crossed-out trash can means that electrical and electronic equipment does not belong in the household trash. You must hand in the old equipment at a collection point.  Before dropping off, you must separate used batteries and accumulators that are not enclosed in the old device from the old device.
Return options:
As an end user, when you purchase a new appliance, you can return your old appliance (which performs essentially the same function as the new one purchased from us) for disposal free of charge. Small appliances with no external dimensions larger than 25 cm can be returned in normal household quantities, regardless of the purchase of a new appliance.
Possibility of return to our company location during opening hours:
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn Possibility return in your area:
We will send you a parcel stamp with which you can return the device to us free of charge. To do this, please contact us by e-mail at service@joy- it.net or by phone.
Packaging information:
Please pack your old device securely for transport. If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.

SUPPORT
We are also there for you after the purchase. If you have any questions or problems arise, we are also available by e-mail, telephone, and ticket support system.
E-Mail: service@joy-it.net
Ticket-System: http://support.joy-it.net
Phone: +49 (0)2845 9360 – 50 (9:30 – 17:15 o’clock)
For more information visit our website: www.joy-it.ne

www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8 47506 Neukirchen-Vluyn

References

• GPIO.IN
• ITnet | Servizi di Colocation e Cloud
• Joy-IT Helpdesk
• For Makers and Professionals | Joy-IT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>