NITECORE Camera Cleaning Pen User Manual
- June 6, 2024
- Nitecore
Table of Contents
Camera Cleaning Pen
User Manual
IMPORTANT NOTICE CONCERNING WARRANTY SERVICE
Thank you for purchasing! Before using this product, please find your
verification code on the package box, and go to
http://photo.nitecore.com/validation
(or scan the QR code beside the verification code to visit on your mobile
phone). Fill in and submit your verification code and personal information as
required. After verification, NITECORE will send you a warranty service email.
This email and your registration email address are essential to your possible
warranty application.
Operating Instructions
- Carbon Cleaning Tip: It is attached to the magnetic compartment on the front of the Cleaning Pen Body. As illustrated, rotate the tip to supplement the carbon powder before pulling it out and attaching it to the body in reverse.
- Cleaning Brushes: Either Cleaning Brush can be installed on the BlowerBabyTM to achieve an optimized cleaning performance. As illustrated, select the applicable brush and install it onto the nozzle of the BlowerBabyTM.
The Camera Cleaning Pen consists of the Carbon Cleaning Tip, the Cleaning Pen Body, the Lens Cleaning Brush, and the Camera Body Cleaning Brush. Either Cleaning Brush can be installed on the BlowerBabyTM Electronic Photography Blower to achieve a one-hand operable brush-and-blow process with optimized cleaning performance.
- The Carbon Cleaning Tip is used for cleaning the fingerprints and grease on the camera lenses and other glass materials.
- The Cleaning Pen Body has a magnetic compartment on the front for attaching the Carbon Cleaning Tip, which has a sponge inside for supplementing the carbon powder. It also has a storage compartment for storing both Cleaning Brushes.
- The Lens Cleaning Brush is suitable for cleaning the camera lenses and other optical lenses.
- The Camera Body Cleaning Brush is suitable for cleaning the gaps and hard surfaces of the camera body.
Operating Instructions
- Carbon Cleaning Tip: It is attached to the magnetic compartment on the front of the Cleaning Pen Body. As illustrated, rotate the tip to supplement the carbon powder before pulling it out and attaching it to the body in reverse.
- Cleaning Brushes: Either Cleaning Brush can be installed on the BlowerBabyTM to achieve an optimized cleaning performance. As illustrated, select the applicable brush and install it onto the nozzle of the BlowerBabyTM.
Warnings
- DO NOT use or expose the Carbon Cleaning Tip with cleaning fluid or any liquid.
- When cleaning the lens, please place it downwards and use the BlowerBabyTM installed with the Lens Cleaning Brush to blow away the large particles before using the Carbon Cleaning Tip to clean the fingerprints and grease to avoid accidental scratches on the lens.
- The product contains small assembly parts. Please keep it out of the reach of children.
- DO NOT use the Carbon Cleaning Tip or the Cleaning Brushes when cleaning the camera sensors.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service.
Should any problem covered under warranty occur, customers can contact their
dealers or distributors in regards to their warranty claims, as long as the
product was purchased from an authorized dealer or distributor? NITECORE’s
Warranty is provided only for products purchased from an authorized source.
This applies to all NITECORE products. All defective/malfunctioning NITECORE®
products can be repaired free of charge for a period of 6 months from the date
of purchase. Please refer to the “IMPORTANT WARRANTY NOTICE” section on top to
validate your product.
The warranty is nullified if the product(s) is/are:
- Broken down, reconstructed, and/or modified by unauthorized parties
- Damaged from wrong operations
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to [email protected]. All images, text, and statements specified herein in this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, information on our official website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX:+86-20-83882723
E-mail: [email protected]
Web:www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,
Guangzhou, 510623, Guangdong, China
Thanks for purchasing NITECORE!
Please find us on facebook: nitecoreimage
Made in China
CCP290921
Documents / Resources
|
NITECORE Camera Cleaning
Pen
[pdf] User Manual
ACC-NITE-BLOWERBABY-PEN, Camera Cleaning Pen, Camera Pen, Pen
---|---