ShopHQ 005-524 Single function Motorized Treadmill User Manual

ShopHQ 005-524 Single function Motorized Treadmill

Product Brief

Product name: Single function Motorized Treadmill

Main parameters and parts list

No.| Parameters Names| Description
1| Input power voltage| 110V～
2| Rated frequency| 50-60Hz
3| Rated power| 1.5HP
4| Speed| 0.8-12km/h
5| Running surface| 15.843.3 inch
6| Max user weight| 240LBS
7| Expand dimensions| 522440 inch
Packing list
No.| Name| Units| Qty| | No.| Name| Units| Qty
1| Complete machine| pc| 1| 2| Accessory Bag| pc| 1
Accessory Bag list
No.| Name| Units| Qty| | No.| Name| Units| Qty
1| Inner hexagon wrench 6mm| pc| 1| 6| Safety Key| pc| 1
2| Inner hexagon wrench 5mm| pc| 1| 7| Silicon oil| pc| 1
3| Combination wrench| pc| 1| 8| User manual| pc| 1
4| Screws M612| pc| 4| 9| Mp3 Cable| pc| 1
5| Screws M825| pc| 2| 10| Plum knob M1020| pc| 1

Security Precautions and Warnings

Tip: Before folding the treadmill, make sure that the surface incline is “zero”.

Notice: Please read the instructions carefully before use.

• This treadmill is for indoor use and storage only. Avoid spilling water on it or placing it in damp areas.
• Please wear suitable workout clothes and sneakers before exercise. Do not exercise on the treadmill barefoot.
• The attached high-power plug cord must be touching the ground when plugged in. Treadmill cord should be plugged into one dedicated electric outlet/circuit, do not share the electric plug outlet you are using for your treadmill with other electrical equipment.
• Keep children away from the machine to avoid accidents. Avoid using the machine for uninterrupted long periods of time, as this will overload the operation and cause damage to the motor and controller, and will accelerate the deterioration of the bearing, running belt, and running board. The treadmill should be maintained regularly per the instructions listed throughout the manual.
• Keep the machine away from areas with high levels of dust to avoid strong static.
• Please turn off the treadmill by switching off the electric power after using it.
• Please ensure you are running in a well-ventilated area.
• Please clamp the security lock cable on your clothing to make sure the machine stops in the event of any emergency situation.
• If you do not feel well while using this machine, please stop and consult a doctor.
• The included silicone lubrication must be kept away from children after use.
• If the power cord is damaged, please contact our qualified maintenance personnel for service rather than disassemble it at csr@merax.com.

Forbidden

Don’t use the machine if the outer protective shell is broken or has broken off, leaving any part of the internal structure exposed, or if the welding parts have fallen off or appear as if they may fall off.

• Otherwise, an accident or injury may occur.
• Don’t jump up and down while the treadmill is in motion.
• Injuries may result from falling.
• Don’t place machines in direct sunlight, or high-temperature places such as near a stove or a heating appliance.
• Otherwise, it may cause leakage and burst into flames.
• Don’t use it if the power cord is damaged or the power plug pin is loose.
• Otherwise, this will lead to an electric shock, short circuit, or fire.
• Don’t damage, forcefully bend or twist the power cord. Don’t place heavy objects on the machine, don’t clamp the power cord.
• Otherwise, it will cause a fire or you can get an electric shock.
• Do not allow more than 1 person to use the machine at one time, do not allow others to get close to the machine while it is in use.
• Or it may cause an accident or injury due to possible falls.
• People who aren’t in a normal conscious state or can’t operate the machine by themselves cannot use the treadmill.
• May lead to accident or injury. Drinking water or pouring water when the treadmill is in use/operating is forbidden.
• May cause electric shock or fire. People who seldom exercise are advised not to suddenly use the treadmill for an intensive workout. Do not use the machine, directly after a meal or when feeling tired.
• This may lead to potential health damage or accidental injury. This product is suitable for residential use. This product is not recommended for commercial use, schools, gymnasiums, etc
• When used for commercial purposes there is a risk of injury.
• Don’t use the treadmill when hard objects are in the pockets of your pants or shorts. Remove them before using the machine.
• Not removing hard objects from your pockets before use may cause accidents or injuries.
• Don’t use the treadmill when the power plug is on or near the needle, garbage, or water.
• May cause electric shock, short circuit, or fire. Do not touch the power plug with wet hands! When not in use, pull out the power plug from the socket.
• Surrounding dust and moisture can age the insulation, and result in a possible leakage fire.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge concerning treadmills unless they are being supervised or have been given instructions concerning the use of the appliance by a person responsible for their safety. Children should be supervised during use to ensure that they do not play with the appliance and or use it in ways it was not intended for.

Treadmill Grounding Safeguard System

This product must remain on the ground while in use at all times. If you notice the machine seems to be dysfunctional or unstable, keeping the treadmill on the ground will allow electricity to flow directly into the ground reducing the risk of electric shock. This product is equipped with a power plug that has a grounding conductor that can auto-connect the treadmill electricity into the ground. Completely insert the plug into a standard socket for proper use.

If the treadmill’s grounding conductor’s connection is improper, it will cause electric shock. If you have any doubt about whether your product is grounded correctly or not, please contact a professional to check and verify for you. When plugging in the treadmill power cord, please plug it into a socket that has the same shape as the plug itself. Do not use a plug adapter.

Installation Instructions

When installing, simply arrange all of the screws in their proper position first, then tighten the screws the treadmill frame has been positioned when the installation of the frame is done.

1. Put the machine flat on the ground. Raise the supportive columns and console upward in the direction shown by the arrows in the picture below.

   • Use a #5 hexagon wrench and screw provided screws (M612) to secure the treadmill base (use two M612 screws for each side). Then screw in the preinstalled M8*22 screws underneath as shown in the left picture below (1 screw on each side).

2. Hold the left and right columns upright, then using a #6 hexagon wrench, screw in the M8*25 screws to secure the console frame to the upright columns. Be sure to tighten any screws installed in previous steps. Take care to not accidentally clamp the cable between the upright columns.

3. Take the plum knob(M10*20) from the accessory bag. Use this knob to lock the main base and columns in place by rotating clockwise, please refer to the picture below.
   If your treadmill is on an uneven surface, this may cause difficulties when rotating the knob. Please lift the column slightly forward so the running surface is perfectly flat in mid-air and tighten the knob as shown in the picture below. In order for the machine to be able to fold easily, please do not twist the knob too tight.

4. Put the safety key on the yellow circle on the console, as seen in the picture below. Press the start button to start the treadmill. (Notice: The treadmill only starts when the safety key is attached to the yellow circle on the console.)

NOTE: after you have finished putting the treadmill together, ensure that all screws are installed in their appropriate place according to the previous steps. Please ensure all parts are properly locked in and secured by screws before plugging in electricity.

Folding instructions When the treadmill is not in use, you can lift the running deck and then use the knob to lock the running deck and base, as shown in the picture below.

Using Instructions

Using your treadmill

1. Insert the power plug properly and turn on the switch(in red color) When the light is on, you will hear a beep sound, and then the screen will light up.
2. Safety key Introduction The treadmill can only start when the safety key is put on the yellow area of the display console. Clip the safety key on clothes when using the treadmill to avoid accidents. For emergency conditions, removing the safety key can stop the treadmill immediately. And put the safety key back to continue using the treadmill.
3. Console instructions
   • Start-up: Press the Start button to start the treadmill. Normally start after 5 seconds of the countdown.
   • Programs and modes: There are 12 automatic programs and 3 modes.
   • Safety lock function: When the safety key is disconnected, “E7” will appear on the screen, the treadmill will gradually stop and you will hear a beeping sound. When you put the safety key back, all of the data on the screen will be cleared in 2 seconds. Under whatever circumstance, the treadmill will stop when disconnected from the safety key and it will immediately show the data from your run on the screen. Once you put the safety key back, the data on the screen will reset.
4. Button function
   • Start button/Stop When the power is on, press the start button and the screen will display “0.8 km/h”, and the treadmill will start. When you are running on the treadmill and press the stop button, all of the data on the screen will clear and the treadmill will gradually come to a complete stop and return to manual mode. Quick buttons located on the handle grip can also be used to start or stop the treadmill(left side).
   • Program When the treadmill is in standby mode, pressing the program key multiple times can cycle the options from manual mode to different automatic programs (P1-P12). The default speed while using manual mode is 0.8 km/hour, the highest speed is 12.0km/hour.
   • Mode When the treadmill is in standby mode, press the mode key to cycle through 3 different ways to countdown your running: time, distance, and calories.
   • Volume ± rotary knob When connect with a mobile phone, rotate the knob clockwise to turn the volume up and rotate counterclockwise to turn the volume down.
   • Speed ± key rotary knob Use these keys to adjust the speed of the treadmill. Rotate clockwise to increase the speed and rotate counterclockwise to decrease the speed. You can also press the knob to adjust the speed directly by 3.0km/h,6.0km/h, and 9.0km/h. Quick buttons located on the handle grip can also be used to start or stop the treadmill(left side).
5. Display Function
   • Speed Display Display the current running speed value.
   • Time Display Display the time of manual mode and the countdown time under automatic modes and programs. Distance display
   • Display cumulative distance under manual mode and programs. Display the distance countdown in automatic mode.
   • Calorie display Display cumulative calories under manual mode and programs. Display the calorie countdown in automatic mode.
   • Heart rate display The heart rate value will show on the display when you place your hands on the heart rate monitor. (The number is for reference only, it cannot be considered as medical data.
6. Automatic program
   • Each program is divided into 10 segments, and the running time of each segment of the program is evenly distributed. Following is a form of speed distribution of 12 programs.

Time

Program

| Set time/ 10 = Running time of each segment
---|---
| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10
P1| Speed| 3| 3| 6| 5| 5| 4| 4| 4| 4| 3
P2| Speed| 3| 3| 4| 4| 5| 5| 5| 6| 6| 4
P3| Speed| 2| 4| 6| 4| 3| 4| 6| 2| 3| 2
P4| Speed| 3| 3| 5| 6| 3| 6| 5| 4| 3| 3
P5| Speed| 3| 6| 6| 6| 4| 3| 3| 5| 5| 4
P6| Speed| 2| 6| 5| 4| 4| 3| 5| 3| 3| 2
P7| Speed| 2| 5| 5| 3| 3| 6| 5| 3| 2| 2
P8| Speed| 2| 4| 4| 4| 5| 6| 4| 4| 6| 2
P9| Speed| 2| 4| 5| 5| 6| 5| 6| 3| 3| 2
P10| Speed| 2| 5| 3| 5| 4| 6| 5| 2| 4| 3
P11| Speed| 2| 5| 6| 3| 4| 5| 6| 5| 3| 2
P12| Speed| 2| 3| 5| 6| 4| 6| 5| 6| 5| 3

Error Code Meaning

E1

| ****

Disrupted                                Electronic Connection: When turned on, the connection between the lower controller and the console is abnormal.

| Possible Causes: The electronic connection between the console and lower controller is blocked, check  each wire that connects the console with the lower controller, make sure that each wire base is fully plugged in.  Check the cable of the console and lower controller, replace it if it’s broken.

E2

| ****

No motor signal

| Possible Causes: The motor cable might not be connected. Check the connection, connect the cable if disconnected. The motor might be damaged. Check to see if it has visible damage or a burnt smell. If yes, replace the motor.

E5

| ****

Electric Current Overload Prevention: When the treadmill is running, the controller detects the electric current is over 6A(unit to measure electricity) for more than 3 seconds.

| Possible Causes: Overloading the treadmill machine system through prolonged use can lead to excessive electric current and the treadmill will stop for your safety. A part might be stuck causing the motor  to stop, adjust the treadmill and restart it. The motor may need to be replaced, check if there is a liquid or burnt smell while the motor is running, if yes replace it. The treadmill monitor may need to be replaced, check if it has a burnt smell, if yes replace the monitor. *The  power supply voltage may need to be changed, check the power supply voltage if it does not match specifications adjust to the correct voltage and test the treadmill again.

E6

| ****

Explosion Prevention: An abnormal voltage level or motor issue has caused the motor to not work properly

| Possible Causes: The power supply voltage may be low. Check if the power supply voltage is 50% lower than  the normal voltage of 110V, if it is, adjust it back to 110V and test the treadmill again. The controller may need to be replaced. Check if the controller has a burnt smell, if yes, replace the controller. The motor cable or wire may need to be reconnected. Check if the motor cable and wire are connected, connect if one or both are not properly connected.

E7

| ****

No safety key

| Put the safety key back on the yellow circle on the console.

Routine Maintenance

Warning: Before cleaning or doing product maintenance, please ensure the treadmill power plug is pulled out of the electric socket.
Cleaning: Thoroughly cleaning your treadmill will extend its useful life. Remove dust periodically in order to keep the parts clean. Be sure to clean both sides of the running belt, this will reduce the accumulation of dust and dirt. Treadmill belts must be cleaned with a damp soapy cloth. Do not use a dripping wet cloth. Please be sure to not wet the electrical components of the treadmill including underneath the running belt to keep everything dry and functional.
Warning: Ensure that the power plug is disconnected before removing the motor cover. Clean the motor at least once a year.
Running belt specialized lubricant This electric treadmill’s running board and the running belt has already been lubricated in the manufacturing process. Friction between the running belt and running board heavily impacts how long your treadmill will last and its performance, therefore the regular application of the lubricant is needed. Please check the board regularly to ensure it is properly lubricated. If the board’s surface is damaged, please contact our customer service center. We recommend applying the lubricant between the running belt and running board using the following schedule: Light user (uses treadmill less than 3 hours a week): Apply lubrication once a month Heavy user (uses treadmill more than 7 hours a week): Apply lubrication twice a month, at the beginning of the month and halfway through the month.

1. For safety measures and to extend the life of your treadmill, it is recommended that if you use the treadmill for 2 hours or more non-stop, to turn off the machine and let it rest for 10 minutes before using it again.

2. If the treadmill belt is too loose, you will experience skidding while running. If the belt is too tight, it may reduce motor performance and increase friction between the roller and running belt impacting your running experience. You can lift two sides of the running belt for 50-75mm when the tightness is appropriate. Running with adjusted alignment and tightness In order to use your treadmill properly so it can function well, it is necessary for you to adjust the running belt into the best position.
   How to align the running belt

   • Put the treadmill flat on the ground
   • Make the treadmill run at a speed of about 6-8km/hour
   • If the running belt is closer to the right, rotate the right adjusting bolt with a ½ turn clockwise, then rotate the left adjusting bolt with a ½ turn counter-clockwise (PictureB)
   • If the running belt is closer to the left, rotate the left adjusting bolt with a ½ turn clockwise, then rotate the right adjusting bolt with a ½ turn counter-clockwise (Picture A).

Applying silicone oil

1. Step 1: Open up the treadmill belt
2. Step 2: Open the silicone oil bottle, squeeze the silicone oil to both sides of the running board, as in the picture below:

PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. If you have any problems or concerns, please feel free to contact our customer service department. We will reply to you as soon as possible.

• TEL: 9095901000
• Tarma@livingess.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>