IKEA LONSAS Self Adhesive Mirror 13x18cm Instructions

IKEA LONSAS Self Adhesive Mirror 13x18cm

Self-adhesive mirror

Note: The surface can be damaged when removing the mirror from the wall.

1. The mirror fix to most surfaces which are even.
2. Fixing mirror to ceilings and sloping ceilings is not recommended.
3. The mirror can be used in bathrooms, but should not be fixed where they come into direct contact with water, since water may damage the adhesive.
4. On porous surfaces like plywood and fibreboard, adhesion can be improved if the surface is first coated with high-gloss lacquer.
5. Wipe the wall surface so that it is clean and dry before fixing the mirror.
6. Wipe the back of the mirror so that it is clean and dry before sticking the tape on it.
7. Position and fix the tape according to the illustration in the assembly instruction.
8. Remember to position and fix the mirror correctly from the start since the tape cannot be reused.

The mirror may break when removing it from the wall. Be careful.

www.ikea.com

Documents / Resources

| IKEA LONSAS Self Adhesive Mirror 13x18cm [pdf] Instructions
LONSAS, Self Adhesive Mirror 13x18cm, LONSAS Self Adhesive Mirror 13x18cm
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>