KEVTU K10H Bluetooth Headset Instruction Manual

KEVTU K10H Bluetooth Headset

DIAGRAM

OPERATION INSTRUCTIONS

Operation tips

1. Fully charge before first use.
2. Plug headphone in the headpi1one jack.
3. Connect the USB charging port and the power adapter with a USB cable for charging.

Power on

Press and hold the multi-function button and the intercom button for 3 seconds until the blue LED indicator flash for 1 second and with a voice prompt that the headset is powered on.

Power off

Press and hold the multi-function button and the intercom button for 3 seconds until the red LED indicator flash for 1 second and with a voice prompt that the headset is powered off.

Pairing with phone
Press and hold the multi-function button for 3 seconds until there is a voice prompt Search and connect the Kl0/Kl0H wireless with the phone until there is a voice prompt indicating the phone and KlO/KlOH wireless paired.

Phone operation

• Answering incoming calls
  Press the multi-function button to answer incoming calls.

• Hang up
  Press the multi-function button to hang up while on a call.

• Voice dial
  Press the voice assistant button and say call someone while not on a call.

• SW itch between phone and the headset
  Press and hold the multi-function button for 2 seconds, the voice will switch between the headset and phone while on a call.

• Automatically answering incoming calls

• First activate the auto-answer function. Then, press and hold the multi-function button for 2 seconds to reject incoming calls.

• Rejecting incoming calls
  Press and hold the multi-function button for 2 seconds to reject incoming calls.

Disconnect devices paired

In power off state, press and hold the volume up, volume down, and multi- function button for 3 seconds until there is a voice prompt.

Voice control

Short press the volume up button to turn up the volume and short press the volume down button to tum down the volume (there is a di tone when reaching the max or min volume).

Switch between languages

In power off state, press and hold the multi-function button and the volume up button to switch between languages.

Turn on and turn off auto-answer

In power off state, press and hold the multi-function button and the volume down button for 3 seconds.

PAIRING FOR TWO PEOPLE

Setting up intercom (1)
Step 1. Disconnect the pairing between A and B

Step 2. Pairing in sequence

• A press and hold the intercom button for 3 seconds until the red and blue LED indicators flash alternatively.
• A press and hold the intercom button for 3 seconds until the red and blue LED indicators flash alternatively.
• B short press the intercom button until the blue LED indicator flashes rapidly. B will search and pair with A. After successfully paired with each other, the intercom function is activated.

Step 3. Short press the intercom button to end the intercom function while being paired.

Step 4. Short press the intercom button to activate the intercom function.

Once paired, the intercom function can be activated or ended with a short press in power on state.

TWO-INTERCOM PAIRING WITH OTHER BRANDS

Setting up intercom (2)
Notes: this product can be paired with the other brands.

• Press and hold the intercom button for 3 seconds until the red and blue LED indicators flash alternatively.

• Short press the intercom button until the blue LED indicator flashes quickly.

• The headset enters into search mode, pair with the other brands and activate the intercom talking function.

• Once paired, short press the intercom button to start or end the intercom talking.

GROUP INTERCOM PAIRING

Group intercom pairing
Note: Serial connection • and up to 8-person Intercom.

Step 1: Unpair A and F
Step 2: press and hold the intercom N button of all devices until there is a voice prompt of “intercom pairing {all devices are powered on first).

Step 3: Double click the intercom button of A and wait for all devices to be paired in sequence.

Step 4: Double click the intercom button to end intercom talking,

Step 5: Short press the intercom button to enter into intercom talking.

MUSIC SHARING

Music sharing
Step 1: After A and B paired, the music can be shared.

• Once hang up the intercom and play music. A press and hold the volume up and down buttons for 2 seconds until there is a voice prompt of music sharing.
• While sharing music, press and hold the volume up and down buttons for 2 seconds to stop sharing music.

Notes: Music will pause and a new audio decoder will be applied during music sharing for some phones due to issues related to their system. Then, you need to press the button to continue playing music.

FUNCTION PRIORITY

• Level 1: phone & intercom by introduced adaptor.
• Level 2: intercom introduced by two-way radio cable.
• Level 3: Wireless intercom.
• Level 4: Music.

SPECIFICATION

• Codecs SBC/ AAC / APTX/ APTXHD
• Transmission range 500m
• Standby time 300 hours
• Working time 18 hours
• Charging time About 2.5 hours
• Charging port Common type-c port
• Battery type Chargeable Lithium
• polymer battery
• Power adaptor 5V-1A
• Working temperature 14•F-13l•F {-10°C-55″C)
• Storage temperature -4″F-140″F { -20″C-60″C )

The actual time can be different from the time in specification depending on the types of phones and its status.
Due to factors such environment and climate, there can be deviation in intercom distance.

VOICE PROMPT OF BATTERY LEVEL WHEN POWERED ON

CHARGING STATUS

• Charging: the red light is on
• Fully charged: the blue LED indicator is on

NOTES

1. The storage temperature of this product is -20°C to 60°C. Do not store it in an environment with too high or low temperature, otherwise, the seivice life of the product will be affected.
2. Do not expose this product to fire to avoid explosion.
3. If you do not use this product for a long time, please store it in a dry environment and charge it once every three months so that the product can work normally.
4. If the product can not be powered on, please charge it to reset.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection again.st harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• lncrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compllance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation.

Company: Kevtu {Shenzhen) Technology Co,. Ltd
Contact: 4009700844
Address: Room 505, Tower B. Taojindi e-commerce incubator base, Longhua new district, Shenzhen city
Website: www.kevtu.cn

Scan to add the corporate wee hat account

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>