Oypla 3073 Lawn Aerator User Manual
- June 6, 2024
- Oypla
Table of Contents
Oypla 3073 Lawn Aerator User Manual
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risk
of injury due to use. All merchandise is sold on this condition, which no
representative of the company can waive or change.
- This product is not a toy, and is only to be used for its designated purpose.
- Never carry out any alterations or modifications to this product.
- Unpacking, installing and fixing the parts are to be completed by an adult.
- This product is intended for outdoor use only.
- Makes sure the area in which you wish to use the lawn aerator has been cleared of objects before use.
- This product has lots of very sharp points. Ensure safety gloves are worn when using the product to avoid personal injury.
- This product is not intended for use by persons (including children) with reduced physical, sensory and mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by persons responsible for their safety.
- Leaving the product outside exposed to weather, especially direct sun, rain and salt air, will speed the weathering process. This can be slowed by removing the product from these conditions, or covering it with a suitable cover.
- Clean only with a damp cloth. Do not use strong industrial cleaning substances or abrasive materials as these will damage the product. Be sure to clean the aerator spikes regularly to maintain the highest level of performance.
- This product is not suitable for use by children.
- If the product is damaged or has any defects, please
Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this
product.
If you are missing any of the below parts, please contact Oypla customer
services: [email protected]
This Product Should Include:
-
To begin, remove all the parts from the carton. After this, unscrew the nut and remove it and the washer from the side of the aerator. Once done, place a connector bar (part 3) onto the end of the aerator. Secure this in place with a washer and a nut. Please see the images above for more detail. Repeat
-
To begin, remove all the parts from the carton. After this, unscrew the nut and remove it and the washer from the side of the aerator. Once done, place a connector bar (part 3) onto the end of the aerator. Secure this in place with a washer and a nut. Please see the images above for more detail. Repeat.
-
To create the full length handle, push the handle end (part 2) and the handle lower (part 4) onto either side of the handle centre (part 1). Be sure that they lock into place using the pressure buttons found on the handle centre (part 1). Please see the images above for more detail
-
To attach the handle to the aerator section, align the holes in the handle lower (part 4) with the holes found in the top of the connector bar (part 3). After this, push a bolt (part 5) through both of the holes, making sure they go through both the handle lower (part 4) and the connector bar (part 3). Once they do, push a washer (part 5) onto the exposed sides of the bolts and secure them in place using a nut each (part 5). Please see the image to the left for more detail.
HAVE A QUESTION ABOUT YOUR PURCHASE?
OUR DEDICATED CUSTOMER SERVICES TEAM ARE HAPPY TO HELP CONTACT TH EM VIA:
TELEPHONE: 020 3600 2255
EMAIL: cse [email protected]
UVE CHAT: www.oypla.com
PLEASE RETAIN A COPY OF THESE INSTRUCTIONS FOR FUTURE CONSULTATION