NRS Healthcare M10966 Plastic Transfer Board Instructions
- June 6, 2024
- NRS Healthcare
Table of Contents
NRS Healthcare M10966 Plastic Transfer Board
General Safety Warning
Maximum User Weight
Please make sure that you read and follow these instructions carefully. Keep these instructions in a safe place for future reference.
INTENDED USE
This Transfer Board has been designed to assist users with limited mobility to transfer between small gaps (less than 150mm) either assisted or by self transfer. The surfaces should be of similar height, for example; wheelchair to bed/ chair.
SPECIFICATION
| Material: | High density polyethylene with non-slip pads on underside. |
|---|---|
| Dimensions: | 495 x 200 x 10mm |
| Weight: | 950g (2lb) |
SAFETY
Warning: The maximum user weight must not be more than 127Kg (20st).
Remove from packaging, check product surfaces are undamaged.
If you see any damage or suspect a fault do not use the product, contact your
supplier immediately.
Do not use on excessive slopes. Inspect at regular intervals, for signs of
wear or damage.
IN USE
- Place the transfer surfaces next to each other at right angles, and as close as possible.
- Remove any detachable arms.
- Position the Transfer Board to bridge the narrow gap between the two surfaces (less than 150mm) making sure that the board is adequately and equally supported on each surface.
- The end-user is now able to shuffle across the board, using arms and legs where possible. Care must be taken to ensure that fingers do not become trapped under the Transfer Board.
- Where possible, the end-user should push down with their hands during transfer in order to lift themselves slightly, thus avoiding rubbing on the board. This is particularly important where there is a loss of sensation
- Assistance from a carer may be required in cases of severe limitation of mobility.
CLEANING INSTRUCTIONS.
Wipe all surfaces periodically with a cloth moistened with a neutral detergent
and hot water, or with a dilute disinfectant solution.
Do not immerse the board in liquid, or use abrasive cleaners.
Regular inspection of the board is recommended for signs of damage to the
surfaces, which may cause increased friction and damage to the skin.
PRODUCT DISPOSAL
This product must be thoroughly cleaned/sterilised prior to disposal.
This product is manufactured from plastic and can be disposed of through Local
Authority Household Waste and Recycling Centres or through Local Trade Waste
Collectors.
PRODUCT GUARANTEE
NRS Healthcare guarantee this product for a period of 12 months, from the date
of purchase, against faulty materials and workmanship.
This guarantee does not cover; fair wear & tear, abuse, misuse, interference
or tampering with any part of the product.
Any guarantee issued by NRS Healthcare does not affect your statutory rights.
NRS HEALTHCARE Sherwood House, Cartwright Way, Forest Business Park Bardon Hill, Coalville, Leicestershire, LE67 1UB, UK.
Tel: Customer Services: 0345 121 8111
Email: [email protected]
NRS Healthcare is a leading supplier of community equipment and daily living aids. Please visit one of our websites to view our full range of products: www.healthcarepro.co.uk or www.completecareshop.co.uk
Documents / Resources
| NRS
Healthcare M10966 Plastic Transfer
Board
[pdf] Instructions
M10966, Plastic Transfer Board, M10966 Plastic Transfer Board
---|---