Orbic R678L5 Myra Smartphone User Guide
- June 6, 2024
- Orbic
Table of Contents
- About Your Phone
- Charge Battery
- Turn Phone ON/OFF
- Using Onscreen Gestures
- Lock and Unlock your Phone
- Make a Call
- Receive a Call
- Send a Text
- Take Photos
- Google Play Store
- Install Apps
- Uninstalling Apps
- Improving Accessibility
- Connect to Wi-Fi
- HD Voice and Video Calling
- Set Up Voice Mail
- Check Voice Mail
- Additional information
- Hearing aid compatibility information
- ORBIC LIMITED WARRANTY
- Documents / Resources
Quick Start
Guide
About Your Phone
- Home Button
- Back Button
- Headset Jack
- USB/Charging Port
- Microphone
- Recent Apps Button
- Front Camera
- Earpiece
- Flash
- Back Camera
- Power/Lock Screen
- Speaker
- Volume Keys
- SIM/Micro SD Card Slot
NOTE: Devices and software are constantly evolving – the screen images
and icons you see here are for reference only.
Initial Phone Set-Up
Your phone already has a SIM card installed. For optimal functionality of your
new device, please use the pre-installed SIM card.
Insert microSD card
If you have a micro SD card, use the pin tool and insert it in the hole to
release the tray. Insert the micro SD card with the gold contacts facing down.
Close the tray.
NOTE: The micro SD card is sold separately.
Charge Battery
Before turning on your phone, charge it fully. Insert the small end of the USB
cable into the phone. Insert the larger end into the charger and plug it into
an outlet.
WARNING: Only use the approved chargers with your device. Incompatible
chargers or tampering with the charger port could damage and void the
warranty.
Turn Phone ON/OFF
To turn ON, press and hold the Power/Lock button located on the right edge of your phone. To turn OFF, press and hold the Power/Lock button and follow the prompts.
Using Onscreen Gestures
Use onscreen gestures to move around the screen; open menus, select items,
zoom in or out on web pages, and more.
Swipe – Swipe by quickly sliding your finger in any direction.
Drag – Touch and hold an item to move it to a new position.
Double Tap – Tap two times rapidly to zoom in or out on a web page or
picture.
Zoom – Spread two fingers apart on a web page, map, or image to zoom in.
Pinch to zoom out.
Lock and Unlock your Phone
To turn on your screen, press the Power/Lock button. Then swipe up on the
screen to unlock it.
To turn off your screen and prevent accidental key presses, press the
Power/Lock button.
Make a Call
- From the Home Screen, tap the Phone icon .
- Tap the Keypad icon .
- Enter the number you want to call or the first letters of the contact’s name and select the contact.
- Tap the Call icon to place the call .
Receive a Call
- From the Home Screen, tap to answer the incoming call.
- From the Lock Screen slide up, the icon to answer an incoming call.
Send a Text
- From the Home Screen, tap .
- Tap Start chat.
- Enter the name or number of the recipient.
- Enter your message.
- To add an attachment to your message, tap .
- Tap to send your message .
Take Photos
- From the Home Screen, tap .
- Using the phone’s main display screen as a viewfinder, adjust the image by aiming the camera at the subject.
- Pinch the screen to zoom in or pinch open to zoom out.
- If desired, before taking the photo, you can tap onscreen icons to access various camera options and settings.
- Tap to take the picture. You can also use the volume keys to take a photo.
Google Play Store
Find and download all of your music, videos, wallpapers, apps, and games. Google Play and Chrome are trademarks of Google LLC.
Install Apps
Selected applications are preinstalled on your phone. There are many more
available in the Play Store.
Play Store
Play Store is the application store for Android phones. Browse through to find
applications. When you find an app you want, download it and follow the
installation instructions. You can also uninstall, update, and manage your
downloaded apps.
Open an App
Simply touch an app to open it.
Uninstalling Apps
Uninstall an App
- Touch and hold an App icon.
- Touch the App Info window that appears.
- Touch UNINSTALL. Touch OK or CANCEL.
NOTE: Many preinstalled apps cannot be uninstalled.
Improving Accessibility
Adjust accessibility settings to assist users who have impaired vision, hearing, or reduced dexterity.
-
Touch Home > swipe up for apps.
Settings > Accessibility. -
Tap a category and set the desired options.
Connect to Wi-Fi
-
Touch the Home Key > swipe up for apps >
Settings > Network & Internet > Wi-Fi. -
Make sure Wi-Fi is ON.
-
Select network or touch Add Network.
-
Enter the network SSID and other required information.
-
Touch Connect.
HD Voice and Video Calling
- Dial phone number and press
- From the call history, tap phone number or contact name and then tap
- From the contact list, select the contact and tap
Set Up Voice Mail
- Dial *** 86 and press Send.**
- When you hear a greeting, press # to interrupt
- Follow the setup instructions.
Check Voice Mail
From your phone:
- Dial *** 86 and press Send.**
- Follow the instructions.
From other phones:
- Dial your wireless number.
- When you hear the greeting, press # to interrupt.
- Follow the instructions.
NOTE: Voice mailboxes not set up within 45 days will be canceled. Your
voice mailbox is not password protected until you create a password by
following the setup instructions.
Verizon Cloud
Verizon Cloud offers secure online storage to back up your contacts and sync
them with your other Cloud-Connected devices.
To learn more, go to “vzw.com/Cloud.”
Support & More
My Verizon Mobile
Manage your account, track your usage, edit account
information, pay your bill, and more.
Get help using your phone
From your computer, visit
“verizonwireless.com/support.”
International travel
For features and rates when outside the US, visit
“verizonwireless.com/international.”
Customer service
Call 1.800.922.0204
Twitter @VZWSupport
More Information
Download a User Guide from
“verizonwireless.com/support”
Additional information
Your wireless device and third-party services Verizon Wireless is the mobile carrier associated with this wireless device, but many services and features offered through this device are provided by or in conjunction with third parties. Verizon Wireless is not responsible for your use of this device or any non-Verizon Wireless applications, services, and products, including any personal information you choose to use, submit or share with others. Specific third-party terms and conditions, terms of use, and privacy policies apply. Please review carefully all applicable terms, conditions, and policies prior to using this wireless device and any associated application, product, or service.
Hearing aid compatibility information
This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer technologies that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Ask your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, ask your service provider or phone retailer.
Safety & Warranty Guide
Important Safety Information
Keep the phone (“Product”) away from dust, water, damp areas,
precipitation, and humidity. Dust, water, liquids, precipitation, and humidity
may cause overheating, electrical leakage, and/or product failure. The
Product, battery, charger, and AC adapter are not waterproof. Keep them away
from liquid, fuels, and chemicals. If the Product gets wet, do not place the
Product in an oven, microwave, or dryer, as this will damage the Product and
could cause a fire or explosion.
Only use the battery and charger approved by the manufacturer. Using other
brands may cause battery leakage, overheating, explosion, or even fire. Do not
use the Product where it might cause danger. Do NOT text and drive.
Battery Use
Handle and store batteries properly to avoid injury or damage. Most battery
issues arise from improper handling and, particularly, from the continued use
of damaged batteries.
- Do not disassemble or open crush, bend or deform, puncture or shred
- Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion, or another hazard.
- Only use the battery for the system for which it is specified
- Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or another hazard.
- Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
- Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage, or another hazard.
- Only authorized service providers shall replace the battery. (If the battery is non-user-replaceable).
- Promptly dispose of used batteries in accordance with local regulations
- Battery usage by children should be supervised.
- Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.
- Improper battery use may result in a fire, explosion, or another hazard.
- The maximum operating temperature is below 55°C.
Note: The battery shall only be serviced by the manufacturer.
CAUTION: Risk of explosion if the battery is replaced by an incorrect
type.
Dispose of used batteries in accordance with local regulations.
Cleaning and Maintenance
The Product, the battery, and the charger are not waterproof. Do not use
them in places with high humidity like a bathroom and also avoid spilling any
liquids on the Product, battery, or charger. Use a soft cloth to clean the
Product, the battery, and the charger. Do not use alcohol, diluted liquid, or
benzene to clean the Product.
Disposal of Product and Batteries
Follow local regulations regarding the disposal of mobile devices and
batteries. In some areas, the disposal of these items in the household or
business trash may be prohibited. Please follow your local regulations and
recycle Products if required Batteries must be recycled or disposed of
properly.
Certification Information (RoHS)
We at Orbic take our social responsibility seriously and are committed to the
cause of serving our environment. It is in keeping with these commitments that
we are proud to state that Orbic phones are RoHS compliant.
Hearing Aid Compatibility Information
This device supports hearing aid compatibility refer to the gift box label for
the specific rating. This phone has been tested and rated for use with hearing
aids for some of the wireless technologies it uses. However, there may be some
newer technologies that have not been tested yet for use with hearing aids. It
is important to try the different features of this phone thoroughly and in
different locations, using your hearing aid or cochlear implant, to determine
if you hear any interfering noise. Ask your service provider or the
manufacturer of this phone for information on hearing aid compatibility. When
some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise.
Some hearing devices are more immune than others to this interference noise
and phones also vary in the amount of interference they generate.
FCC SAR Warning
This model phone meets the government’s requirements for exposure to radio
waves. This phone is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government: The exposure standard for
wireless mobile phones employs a unit of
measurement is known as the Specific Absorption Rate or SAR. The SAR limit set
by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating
positions accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. The SAR guideline
includes a considerable safety margin designed to assure the safety of all
persons regardless of age and health. The FCC has granted an Equipment
Authorization for this model phone with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid after searching on FCC ID: 2ABGH-
R678L5 or at http://www.orbic.us/ For body-worn operation, this phone has
been tested and meets the FCC RF exposure guidelines for use with an accessory
that contains no metal and positions the handset a minimum of 10 mm from the
body. The use of other
enhancements may not ensure compliance with FCC RF exposure guidelines. If you
do not use a body-worn accessory and are not holding the phone at the ear,
position the handset a minimum of 10 mm from your body when the phone is
switched on.
Hearing Aid Compatibility Hac For
Wireless Telecommunications Devices
THIS PHONE HAS A HAC RATING OF M3/T3
WHAT IS HEARING AID COMPATIBILITY?
The Federal Communications Commission has implemented rules and a rating
system designed to enable people who wear hearing aids to effectively use
these wireless telecommunications devices. The standard for compatibility of
digital wireless phones with hearing aids is set forth in American National
Standard Institute (ANSI) standard C63.19. There are two sets of ANSI
standards with ratings from one to four (four being the best rating): an “M”
rating for reduced interference making it easier to hear conversations on the
phone when using the hearing aid microphone, and a “T” rating that enables the
phone to be used with hearing aids operating in the telecoil mode thus
reducing unwanted background noise.
HOW WILL I KNOW WHICH WIRELESS PHONES ARE HEARING AID COMPATIBLE?
The Hearing Aid Compatibility rating is displayed on the wireless phone box. A
phone is considered Hearing Aid Compatible for acoustic coupling (microphone
mode) if it has an “M3” or “M4” rating. A digital wireless phone is considered
Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a “T3”
or “T4” rating.
HOW WILL I KNOW IF MY HEARING AID WILL WORK WITH A PARTICULAR DIGITAL
WIRELESS PHONE?
You’ll want to try a number of wireless phones so that you can decide which
works the best with your hearing aids. You may also want to talk with your
hearing aid professional about the extent to which your hearing aids are
immune to interference, if they have wireless phone shielding, and whether
your hearing aid has a HAC ratio.
FCC Statement
This product complies with Part 15 of the FCC Rules. Operation is subject to
the following three conditions:
- This Product may not cause harmful interference, and
- This Product must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE 1 :
This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This Product generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the Product off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- To view device FCC ID on a device look at the label in the battery compartment, for devices without a battery door there is E-label information available by selecting: Settings > About phone
NOTE 2 :
Orbic or the manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to the Product. Such modifications could
void the user’s authority to operate the equipment.
Data transmission is always initiated by software, which is then passed down
through the MAC, through the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the MAC. These are the only
ways the digital baseband portion will turn on the RF transmitter, which it
then turns off at the end of the packet. Therefore, the transmitter will be on
only while one of the aforementioned packets is being transmitted. In other
words, this device automatically discontinues transmission in case of either
absence of information to transmit or operational failure.
ORBIC LIMITED WARRANTY
WHO THIS WARRANTY COVERS
This 12-month limited warranty extends only to the original purchaser of this
product within the United States. This warranty is not transferable. This
warranty is conditioned upon the proper use of the Product.
WHAT THIS WARRANTY COVERS
Orbic offers you a limited warranty that extends for the first twelve (12)
month period to the original purchaser from the date of the original purchase
with proof of purchase. Without valid proof of purchase, Orbic offers a
limited warranty extending fifteen (15) months from the date of manufacture,
which is coded on the product label (“Warranty Period”).
Should the Product, inbox accessories, or any part during normal consumer
usage and conditions be proven defective in material or workmanship that
results in Product failure, such defect(s) will be repaired or replaced (with
new or rebuilt parts) at Orbic’s discretion, without charge for parts or labor
directly related to the defect?
WHAT THIS WARRANTY DOES NOT COVER
- Warranty claims outside of the Product Warranty Period.
- Damage or defects caused by using the Product other than in the normal course.
- Defects or damages resulting from accident, misuse, abnormal use, abnormal conditions, improper storage, unauthorized modifications, unauthorized repair, improper installation, or other acts which are not the fault of Orbic.
- Defects or damage resulting from excessive force or the use of a metallic object when pressing the touch screen.
- Product with altered, defaced or removed serial number.
- Damage resulting from the use of accessories not approved by Orbic.
- Damage from exposure to moisture, humidity, excessive temperature, or extreme environment.
- Liquid damage due to not properly sealed/locked accessories, ports, and or battery latches of water resistance devices.
- All surfaces and externally exposed parts are scratched or damaged due to normal customer use.
- All software, including operating system software, third-party software, applications, and all other software of any kind.
- Damage caused by ordinary wear and tear of the Product.
- Customer abuse or other physical abuse or mistreatment of Product as evidenced by:
a. Missing required faceplate;
b. Damaged LCD or Lens (e.g., the product is either broken, cracked, smashed, bleeding, etc.;
c. IMEI is unreadable electronically or due to missing or altered serial number, IMEI, and/or reliance date label so as to affect readability;
d. Missing keys on keypad beyond normal wear and tear;
e. Unapproved Product modification;
f. Visible Product surface physical damage resulting in the product being smashed, chewed, gouged, burned, or melted;
g. Liquid damage as evidenced by submission in liquid or any other evidence of liquid ingress, including corrosion of any of the connections and noticeable excessive residue.
WHAT ARE THE LIMITS OF ORBIC’S LIABILITY
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF ORBIC’S RESPONSIBILITIES AND
THE EXCLUSIVE REMEDY REGARDING THE PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN
NO EVENT SHALL ORBIC BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF
USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS, OR SAVINGS;
INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING
FROM THE USE OR INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE DISCLAIMER
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU. ORBIC
MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE, OR
SUITABILITY OF ANY
THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH THE PRODUCT, OR THE
ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT
DISTRIBUTED BY ORBIC OR OTHERWISE. RESPONSIBILITY FOR THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE, AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT RESTS SOLELY WITH THE USER AND THE DIRECT VENDOR, OWNER,
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.
Nothing in the Product instructions or information shall be construed to
create an express warranty of any kind with respect to the Product. No agent,
employee, dealer, representative, or reseller is authorized to modify or
extend this Limited Warranty or to make binding representations or claims,
whether in advertising, presentations, or otherwise, on behalf of Orbic
regarding the Product or this Limited Warranty.
This Limited Warranty gives you specific legal rights and you may also have
other rights that vary from state to state.
WHAT ARE THE PROCEDURES FOR RESOLVING DISPUTES?
ALL DISPUTES WITH ORBIC ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE
SALE, CONDITION, OR PERFORMANCE OF THE
PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION,
AND NOT BY A COURT OR JURY. Any such dispute
shall not be combined or consolidated with a dispute involving any other
person’s or entity’s products or claim and, specifically, without limitation
of the foregoing, shall not under any circumstances proceed as part of a class
action. The arbitration shall be conducted before a single arbitrator, whose
award may not exceed, in form or amount, the relief allowed by applicable law.
The arbitration shall be conducted according to the American Arbitration
Association (AAA) Commercial Arbitration Rules applicable to consumer
disputes. This arbitration provision is entered pursuant to the Federal
Arbitration Act. The laws of the State of New York, without reference to its
choice of laws principles, shall govern the interpretation of the Limited
Warranty and all disputes that are subject to this arbitration provision. The
arbitrator shall decide all issues of interpretation and application of this
arbitration provision and the Limited Warranty. This arbitration provision
also applies to claims against Orbic’s employees, representatives, and
affiliates if any such claim arises from the Product’s sale, condition or
performance.
HOW TO GET WARRANTY SERVICE
To obtain warranty service, please call the following telephone number from
anywhere in the continental United States:
1-877-872-4555
orbic.us
**BC**
Documents / Resources
|
Orbic R678L5 Myra
Smartphone
[pdf] User Guide
R678L5, 2ABGH-R678L5, 2ABGHR678L5, R678L5 Myra Smartphone, Myra Smartphone,
Smartphone, R678L5
---|---