Orbic R8L5T Tab 8 5G Smart Tablet User Guide
- June 5, 2024
- Orbic
Table of Contents
- Orbic R8L5T Tab 8 5G Smart Tablet User Guide
- About Your Tablet
- Initial Tablet Setup
- Insert microSD card
- Charge Battery
- Turn Tablet ON/OFF
- Using Onscreen Gestures
- Lock and Unlock your Tablet
- Play Store
- Uninstalling Apps
- Improving Accessibility
- Connect to Wi-Fi
- Verizon Cloud
- Support & More
- Additional information
- Product safety & warranty information
- Important Safety Information
- Battery Use
- Cleaning and Maintenance
- Disposal of Product and Batteries
- Certification Information (RoHS)
- FCC SAR Warning
- FCC Statement
- NOTE 1:
- NOTE 2:
- ORBIC LIMITED WARRANTY
- WHAT ARE THE LIMITS OF ORBIC’S LIABILITY
- WHAT ARE THE PROCEDURES FOR RESOLVING DISPUTES?
- HOW TO GET WARRANTY SERVICE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Orbic R8L5T Tab 8 5G Smart Tablet User Guide
About Your Tablet
NOTE: Devices and software are constantly evolving – the screen images and icons you see here are for reference only.
Initial Tablet Setup
Your tablet already has a SIM card installed. For optimal functionality of your new device, please use the pre-installed SIM card.
Insert microSD card
If you have a micro-SD card, use the pin tool and insert it in the hole to
release the tray. Insert the micro-SD card with the gold contacts facing down.
Close the tray.
NOTE: The micro-SD card is sold separately.
Charge Battery
Before turning on your tablet, charge it fully. Insert the small end of the USB cable into the tablet. Insert the larger end into the charger and plug it into an outlet.
WARNING: Only use the approved chargers with your device. Incompatible chargers or tampering with the charger port could damage and void the warranty.
Turn Tablet ON/OFF
To turn ON, press and hold the Power/Lock button located on the right edge of your tablet. To turn OFF, press and hold the Power/Lock button and follow the prompts.
Using Onscreen Gestures
Use onscreen gestures to move around the screen; open menus, select items,
zoom in or out on web pages, and more.
Swipe – Swipe by quickly sliding your finger in any direction. Drag – Touch
and hold an item to move it to a new position. Double Tap – Tap two times
rapidly to zoom in or out on a picture.
Zoom – Spread two fingers apart on a web page, map or image to zoom in. Pinch
to zoom out.
Lock and Unlock your Tablet
To turn on your screen, press the Power/Lock button. Then swipe up on the
screen to unlock it.
To turn off your screen and prevent accidental key presses, press the
Power/Lock button.
Calling
- Calling is supported from the Message+ app when paired with an active Verizon device.
Texting
- Texting is supported from the Message+ app when paired with an active Verizon device.
Take Photos
- From the Home Screen, tap .
- Using the tablet’s main display screen as a view finder, adjust the image by aiming the camera at the subject.
- Pinch the screen to zoom in or pinch open to zoom out.
- If desired, before taking the photo, you can tap onscreen icons to access various camera options and settings.
- Tap to take the picture. You can also use the volume keys to take a photo.
Google Play Store
Find and download all of your music, videos, wallpapers, apps, and games. Google Play and Chrome are trademarks of Google LLC.
Install Apps
Selected applications are preinstalled on your tablet. There are many more available in the Play Store.
Play Store
Play Store is the application store for Android tablets. Browse through to find applications. When you find an app you want, download it and follow the installation instructions. You can also uninstall, update, and manage your downloaded apps.
Open an App
Simply touch an app to open it.
Uninstalling Apps
Uninstall an App
- Touch and hold an App icon.
- Touch the App Info window that appears.
- Touch UNINSTALL. Touch OK or CANCEL. NOTE: Many preinstalled apps cannot be uninstalled.
Improving Accessibility
Adjust accessibility settings to assist users who have impaired vision, hearing or reduced dexterity.
- Touch Home swipe up for apps. Settings > Accessibility.
- Tap a category and set the desired options.
Connect to Wi-Fi
- Touch the Home Key > swipe up for apps > Settings > Network & Internet > Wi-Fi.
- Make sure Wi-Fi is ON.
- Select network or touch Add Network.
- Enter the network SSID and other required information.
- Touch Connect.
Verizon Cloud
Verizon Cloud offers secure online storage to back up your contacts and sync
them with your other Cloud-Connected devices.
To learn more, go to “vzw.com/Cloud.”
Support & More
My Verizon Mobile
Manage your account, track your usage, edit account information, pay your bill
and more.
Get help using your tablet
from your computer, visit “verizonwireless.com/support.”
International travel
For features and rates when outside the US, visit
“verizonwireless.com/international.”
Customer service
Call 1.800.922.0204
Twitter @VZWSupport
More Information
Download a User Guide from “verizonwireless.com/support”
Additional information
Your wireless device and third-party services
Verizon Wireless is the mobile carrier associated with this wireless device,
but many services and features offered through this device are provided by or
in conjunction with third parties. Verizon Wireless is not responsible for
your use of this device or any non-Verizon Wireless applications, services and
products, including any personal information you choose to use, submit or
share with others. Specific third-party terms and conditions, terms of use and
privacy policies apply. Please review carefully all applicable terms,
conditions and policies prior to using this wireless device and any associated
application, product or service.
Product safety & warranty information
Important Safety Information
Keep the Tablet (“Product”) away from dust, water, damp areas, precipitation
and humidity. Dust, water, liquids, precipitation and humidity may cause
overheating, electrical leakage, and/or Product failure. The Product, battery,
charger and AC adapter are not waterproof. Keep them away from liquid, fuels
and chemicals. If the Product gets wet, do not place the Product in an oven,
microwave or dryer, as this will damage the Product and could cause a fire or
explosion.
Only use the battery and charger approved by the manufacturer. Using other
brands may cause battery leakage, overheating, explosion or even fire. Do not
use the Product where it might cause danger. Do NOT text and drive.
Battery Use
Handle and store batteries properly to avoid injury or damage. Most battery issues arise from improper handling and, particularly, from the continued use of damaged batteries.
- Do not disassemble or open crush, bend or deform, puncture or shred
- Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.
- Only use the battery for the system for which it is specified
- Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
- Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
- Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.
- Only authorized service providers shall replace battery. (If the battery is non-user replaceable).
- Promptly dispose of used batteries in accordance with local regulations
- Battery usage by children should be supervised.
- Avoid dropping the Tablet or battery. If the Tablet or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.
- Improper battery use may result in a fire, explosion or other hazard. The maximum operating temperature is 45°C.
Note: The battery shall only be serviced by the manufacturer.
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries in accordance with local regulations.
Cleaning and Maintenance
The Product, the battery and the charger are not waterproof. Do not use them in places with high humidity like a bathroom and also avoid spilling any liquids on the Product, battery or charger. Use a soft cloth to clean the Product, the battery and the charger. Do not use alcohol, diluted liquid or benzene to clean the Product.
Disposal of Product and Batteries
Follow local regulations regarding disposal of mobile devices and batteries. In some areas, the disposal of these items in household or business trash may be prohibited. Please follow your local regulations and recycle Product if required Batteries must be recycled or disposed of properly.
Certification Information (RoHS)
We at Orbic take our social responsibility seriously and are committed to the cause of serving our environment. It is in keeping with these commitments that we are proud to state that Orbic phones are RoHS compliant.
FCC SAR Warning
This model Tablet meets the government’s requirements for exposure to radio
waves.
This Tablet is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government:
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg. Tests for SAR are conducted using standard operating positions
accepted by the FCC with the Tablet transmitting at its highest certified
power level in all tested frequency bands. The SAR guideline includes a
considerable safety margin designed to assure the safety of all persons
regardless of age and health.
The FCC has granted an Equipment Authorization for this model Tablet with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model Tablet is on file with the FCC and
can be found under the Display Grant section of http://www.fcc.gov/oet/fccid
after searching on: FCC ID: 2ABGH-R8L5T or at http://www.orbic.us/
For body worn operation, this Tablet has been tested and meets the FCC RF
exposure guidelines for use with an accessory that contains no metal and
positions the handset a minimum of 10 mm from the body. Use of
otherenhancements may not ensure compliance with FCC RF exposure guidelines.
If you do not use a body-worn accessory and are not holding the Tablet at the
ear, position the handset a minimum of 10 mm from your body when the Tablet is
switched on
FCC Statement
This Product complies with Part 15 of the FCC Rules. Operation is subject to
the following three conditions:
(1) This Product may not cause harmful interference, and
(2) This Product must accept any interference received, including interference
that may cause undesired operation.
(3) Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE 1:
This Product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This Product generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this Product does cause harmful interference to radio or television reception, which can be determined by turning the Product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- To view device FCC ID on a device look at the label in the battery compartment, for devices without a battery door there is a E-label information available by selecting: Settings > About tablet
NOTE 2:
Orbic or the manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to the Product. Such modifications could
void the user’s authority to operate the equipment.
Data transmission is always initiated by software, which is then passed down
through the MAC, through the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the MAC. These are the only
ways the digital baseband portion will turn on the RF transmitter, which it
then turns
off at the end of the packet. Therefore, the transmitter will be on only while
one of the aforementioned packets is being transmitted. In other words, this
device automatically discontinues transmission in case of either absence of
information to transmit or operational failure.
ORBIC LIMITED WARRANTY
WHO THIS WARRANTY COVERS
This 12 month limited warranty extends only to the original purchaser of this product within the United States. This warranty is not transferable. This warranty is conditioned upon the proper use of the Product.
WHAT THIS WARRANTY COVERS
Orbic offers you a limited warranty that extends for the first twelve (12)
month period to the original purchaser from the date of original purchase with
proof of purchase. Without valid proof of purchase, Orbic offers a limited
warranty extending fifteen (15) months from date of manufacture, which is
coded on the product label (“Warranty Period”).
Should the Product, inbox accessories or any part during normal consumer usage
and conditions be proven defective in material or workmanship that results in
Product failure, such defect(s) will be repaired or replaced (with new or
rebuilt parts) at Orbic’s discretion, without charge for parts or labor
directly related to the defect.
WHAT THIS WARRANTY DOES NOT COVER
- Warranty claims outside of the Product warranty Period.
- Damage or defects caused by using the Product other than in the normal course.
- Defects or damages resulting from accidental, misuse, abnormal use, abnormal conditions, improper storage, unauthorized modifications, unauthorized repair, improper installation, or other acts which are not the fault of Orbic.
- Defects or damage resulting from excessive force or use of a metallic object when pressing the touch screen.
- Product with altered, defaced or removed serial number.
- Damage resulting from use of accessories not approved by Orbic.
- Damage from exposure to moisture, humidity, excessive temperature or extreme environment.
- Liquid damage due to not properly sealed/locked accessories, ports and or battery latches of water resistance devices.
- All surfaces and externally exposed parts that are scratched or damaged due to normal customer use.
- All software, including operating system software, third-party software, applications, and all other software of any kind.
- Damage caused by ordinary wear and tear of the Product.
- Customer abuse or other physical abuse or mistreatment of Product as evidenced by:
a. Missing required faceplate;
b. Damaged LCD or Lens (e.g., the product is either broken, cracked, smashed, bleeding, etc.;
c. IMEI is unreadable electronically or due to missing or altered serial number, IMEI and/or reliance date label so as to affect readability;
d. Missing keys on keypad beyond normal wear and tear;
e. Unapproved Product modification;
f. Visible Product surface physical damage resulting in product being smashed, chewed, gouged, burned or melted;
g. Liquid damage as evidenced by submission in liquid or any other evidence of liquid ingress, including corrosion of any of the connections and noticeable excessive residue.
WHAT ARE THE LIMITS OF ORBIC’S LIABILITY
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF ORBIC’S RESPONSIBILITIES AND THE EXCLUSIVE REMEDY REGARDING THE PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OFTHIS LIMITED WARRANTY. IN NO EVENT SHALL ORBIC BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS, OR SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM THE USE OR INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU.
ORBIC MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH
THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCHSOFTWARE OR EQUIPMENT WITH
THE PRODUCT DISTRIBUTED BY ORBIC OR OTHERWISE. RESPONSIBILITY FOR THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD- PARTY
SOFTWARE OR EQUIPMENT RESTS SOLELY WITH THE USER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.
Nothing in the Product instructions or information shall be construed to
create an express warranty of any kind with respect to the Product. No agent,
employee, dealer, representative or reseller is authorized to modify or extend
this Limited Warranty or to make binding representations or claims, whether in
advertising, presentations or otherwise, on behalf of Orbic regarding the
Product or this Limited Warranty.
This Limited Warrant gives you specific legal rights and you may also have
other rights that vary from state to state.
WHAT ARE THE PROCEDURES FOR RESOLVING DISPUTES?
ALL DISPUTES WITH ORBIC ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE OF THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND NOT BY A COURT OR JURY. Any such disputeshall not be combined or consolidated with a dispute involving any other person’s or entity’s products or claim and, specifically, without limitation of the foregoing, shall not under any circumstances proceed as part of a class action. The arbitration shall be conducted before a single arbitrator, whose award may not exceed, in form or amount, the relief allowed by applicable law. Thearbitration shall be conducted according to the American Arbitration Association (AAA) Commercial Arbitration Rules applicable to consumer disputes. This arbitration provision is entered pursuant to the Federal Arbitration Act. The laws of the State of New York, without reference to its choice of laws principles, shall govern the interpretation of the Limited Warranty and all disputes that are subject to this arbitration provision. The arbitrator shall decide all issues of interpretation and application of this arbitration provision and the Limited Warranty. This arbitration provision also applies to claims against Orbic’s employees, representatives, and affiliates if any such claim arises from the Product’s sale, condition or performance.
HOW TO GET WARRANTY SERVICE
To obtain warranty service, please call the following telephone number from anywhere in the continental United States: 1-877-872-4555
References
- International Phone Plans - Verizon
- Verizon Support - Mobile & Home
- Verizon Cloud - Mobile Phone Backup | Verizon Wireless
- Orbic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>